NETGEAR BR200 Manuel

Hardware Installation Guide

Insight Managed Business Router

BR200

NETGEAR, Inc.

350 E. Plumeria DriveSeptember 2020

San Jose, CA 95134, USA202-12152-01

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Netgear BR200 o

cerca il tuo prodotto tra le migliori offerte di Router

Support and Community

Visit netgear.com/support to get your questions answered and access the latest

downloads.

You can also check out our NETGEAR Community for helpful advice at

community.netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français

canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at

https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the

device to your place of purchase within your return period.

Trademarks

Any non-NETGEAR trademarks are used for reference purposes only.

Revision History

CommentsPublish DatePublication Part

Number

First publication for router model BR200.September 2020202-12152-01

Insight Managed Business Router BR200

Contents

Chapter 1 Introduction

Overview................................................................................................5

Key hardware features.........................................................................6

Safety instructions and warnings........................................................6

Chapter 2 Hardware Overview

Front panel with LEDs........................................................................11

Back panel...........................................................................................12

RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity.....12

Reset button........................................................................................13

Chapter 3 Installation

Step 1: Prepare the site......................................................................15

Step 2: Protect against electrostatic discharge..............................16

Step 3: Unpack the router.................................................................16

Step 4: Install the router.....................................................................17

Install the router on a flat surface.................................................17

Install the router in a rack..............................................................18

Wall-mount the router...................................................................18

Wall-mount the router horizontally.........................................19

Wall-mount the router vertically..............................................20

Mount the router to a pole or another surface...........................22

Step 5: Connect the router to a modem.........................................22

Step 6: Connect devices to the router.............................................22

Step 7: Check the installation...........................................................23

Step 8: Apply power and check the LEDs.......................................23

Step 9: Configure and manage the router......................................24

Chapter 4 Troubleshooting

Hardware troubleshooting chart......................................................26

Additional troubleshooting suggestions.........................................27

Introduction

This hardware installation guide is for the NETGEAR Insight Managed Business Router

model BR200. In this manual, this model is referred to as the router, unless we mention

otherwise.

The router is designed to provide firewall and VPN gateway functionality for small

business environments. A pair of routers can provide VPN functionality to users between

remote sites. The router can support up to 10 simultaneous remote VPN users.

The router provides four Gigabit RJ-45 copper LAN ports and one dedicated Gigabit

RJ-45 copper WAN port in a chassis that you can place on a desktop or mount to a wall.

The router can also be mounted in a rack. The LEDs are on the front panel and the ports

are on the back panel.

This hardware installation guide complements the installation guide that came with your

router.

This chapter serves as an introduction to the router and includes the following sections:

• Overview

• Key hardware features

• Safety instructions and warnings

Note: For more information about the topics that are covered in this manual, visit the

support website at netgear.com/support/.

Note: For more documentation about the router, including the data sheet with technical

specifications, visit netgear.com/support/download/.

Overview

The router provides five Gigabit Ethernet copper ports, one of which is a dedicated

Internet uplink port. All copper ports use RJ-45 connectors. The router integrates a

Stateful Packet Inspection (SPI) firewall and provides instant Virtual Private Network

(VPN) technology for remote access (client-to-site) and office-to-office (site-to-site)

connectivity. The IPSec encryption options include 56-bit DES, 168-bit 3DES, and 128-,

192-, and 256-bit AES. The authentication options include SHA-1 and MD5. The router

also supports VPN passthrough.

The router provides management options that let you discover the router on the network

and configure, monitor, and control the router:

•Local browser user interface (UI). You must access the local browser UI to set up

the WAN (Internet) connection and basic settings of the router. For more information

about the local browser UI, see the user manual, which you can download from

netgear.com/support/download/.

•NETGEAR Insight mobile app. After you set up the WAN connection of the router

using the local browser UI, you can use the NETGEAR Insight mobile app to discover

the router on the network and add the router to the NETGEAR Insight app. Doing

so allows you to set up the router in the network and manage and monitor the router

remotely from your smartphone. You can choose from four methods to add the

router to the NETGEAR Insight app: You can scan your network for the router, scan

the QR code or the barcode of the router, or add the serial number of the router.

For more information, visit netgear.com/insight and see the NETGEAR knowledge

base articles at netgear.com/support/.

•Insight Cloud portal. As an Insight Premium or Pro user, after you set up the WAN

connection of the router using the local browser UI, you can use the NETGEAR Insight

Cloud portal to set up the router in the network, perform advanced remote

management, monitor the router, analyze the router and network usage, and, if

necessary, troubleshoot the router and the network.

You can install the router freestanding (on a desktop) or wall-mounted, using the

VESA-standard mounting holes and supplied wall-mount kit. You can also rack-mount

the router in a standard 19-inch rack, using rack-mount kit that is supplied with the

router. The router is IEEE compliant and offers low latency. All ports can automatically

negotiate to the highest speed, which makes the router very suitable for a mixed

environment with Gigabit Ethernet and Fast Ethernet.

For Gigabit Ethernet connections, use Category 5 (Cat 5) or higher-rated Ethernet cables

terminated with RJ-45 connectors.

Hardware Installation Guide5Introduction

Insight Managed Business Router BR200

Key hardware features

The router includes the following key hardware features:

•Four Gigabit Ethernet LAN ports

•One dedicated Gigabit Ethernet WAN (Internet) port

•Media Access Control (MAC) address table size of 16K entries, automatic address

learning function to build the packet-forwarding information table

•Processor speed of 1700 MHz

•1 GB of RAM and 128 MB of flash memory

•Includes the following mounting hardware:

-Four rubber footpads for tabletop installation

-Wall-mount screw kit for wall installation

-Rack-mount brackets and screw kit for rack-mount installation in a standard

19-inch rack

•AutoSensing and autonegotiating capabilities for all ports

•Auto Uplink™ technology is supported on all ports

•Store-and-forward transmission to remove bad packets from the network

•Active flow control to minimize packet loss and frame drops

•Half-duplex backpressure control

•Per-port status LEDs and system status LEDs:

- System Power LED

- System Internet LED

- Cloud Connection LED

- Per-port link, speed, and activity LED

•VPNC (Basic, AES Interop), ICSA Firewall

Safety instructions and warnings

Use the following safety guidelines to ensure your own personal safety and to help

protect your system from potential damage.

Hardware Installation Guide6Introduction

Insight Managed Business Router BR200

To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,

observe the following precautions:

•This product is designed for indoor use only in a temperature-controlled and

humidity-controlled environment. Note the following:

-For more information about the environment in which this product must operate,

see the environmental specifications in the appendix or the data sheet.

-If you want to connect the product to a device located outdoors, the outdoor

device must be properly grounded and surge protected, and you must install an

Ethernet surge protector inline between the indoor product and the outdoor

device. Failure to do so can damage the product.

-Before connecting the product to outdoor cables or devices, see

https://kb.netgear.com/000057103 for additional safety and warranty information.

Failure to follow these guidelines can result in damage to your NETGEAR product,

which might not be covered by NETGEAR’s warranty, to the extent permissible by

applicable law.

•Observe and follow service markings:

- Do not service any product except as explained in your product documentation.

Some devices should never be opened.

-If applicable to your product, opening or removing covers that are marked with

the triangular symbol with a lightning bolt can expose you to electrical shock.

We recommend that only a trained technician services components inside these

compartments.

•If any of the following conditions occur, unplug the product from the power outlet,

and then replace the part or contact your trained service provider:

- Depending on your product, the power adapter, power adapter cable, power

cable, extension cable, or plug is damaged.

-An object fell into the product.

- The product was exposed to water.

- The product was dropped or damaged.

-The product does not operate correctly when you follow the operating

instructions.

•Keep the product away from radiators and heat sources. Also, do not block cooling

vents.

Hardware Installation Guide7Introduction

Insight Managed Business Router BR200

•Do not spill food or liquids on your product components, and never operate the

product in a wet environment. If the product gets wet, see the appropriate section

in your troubleshooting guide, or contact your trained service provider.

•Do not push any objects into the openings of your product. Doing so can cause fire

or electric shock by shorting out interior components.

•Use the product only with approved equipment.

•If applicable to your product, allow the product to cool before removing covers or

touching internal components.

•Operate the product only from the type of external power source indicated on the

electrical ratings label. If you are not sure of the type of power source required,

consult your service provider or local power company.

•To avoid damaging your system, if your product uses a power supply with a voltage

selector, be sure that the selector is set to match the power at your location:

-115V, 60 Hz in most of North and South America and some Far Eastern countries

such as South Korea and Taiwan

- 100V, 50 Hz in eastern Japan and 100V, 60 Hz in western Japan

-230V, 50 Hz in most of Europe, the Middle East, and the Far East

•Be sure that attached devices are electrically rated to operate with the power available

in your location.

•Depending on your product, use only a supplied power adapter or approved power

cable:

If your product uses a power adapter:

-If you were not provided with a power adapter, contact your local NETGEAR

reseller.

-The power adapter must be rated for the product and for the voltage and current

marked on the product electrical ratings label.

If your product uses a power cable:

-If you were not provided with a power cable for your system or for any

AC-powered option intended for your system, purchase a power cable approved

for your country.

-The power cable must be rated for the product and for the voltage and current

marked on the product electrical ratings label. The voltage and current rating of

the cable must be greater than the ratings marked on the product.

•To help prevent electric shock, plug the system and peripheral power cables into

properly grounded power outlets.

Hardware Installation Guide8Introduction

Insight Managed Business Router BR200

•If applicable to your product, the peripheral power cables are equipped with

three-prong plugs to help ensure proper grounding. Do not use adapter plugs or

remove the grounding prong from a cable. If you must use an extension cable, use

a three-wire cable with properly grounded plugs.

•Observe extension cable and power strip ratings. Make sure that the total ampere

rating of all products plugged into the extension cable or power strip does not

exceed 80 percent of the ampere ratings limit for the extension cable or power strip.

•To help protect your system from sudden, transient increases and decreases in

electrical power, use a surge suppressor, line conditioner, or uninterruptible power

supply (UPS).

•Position system cables, power adapter cables, or power cables carefully. Route

cables so that they cannot be stepped on or tripped over. Be sure that nothing rests

on any cables.

•Do not modify power adapters, power adapter cables, power cables or plugs. Consult

a licensed electrician or your power company for site modifications.

•Always follow your local and national wiring rules.

Hardware Installation Guide9Introduction

Insight Managed Business Router BR200

Hardware Overview

This chapter describes the router hardware features.

The chapter includes the following sections:

• Front panel with LEDs

• Back panel

• RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity

• Reset button

Table des matières

Autres manuels NETGEAR Routeur réseau

NETGEAR

NETGEAR D6220 Feuille d'instructions

NETGEAR

NETGEAR RT311 Comment utiliser

NETGEAR

NETGEAR Orbi RBR20 Manuel utilisateur

NETGEAR

NETGEAR WGR614 v6 Manuel utilisateur

NETGEAR

NETGEAR C6300v2 Manuel utilisateur

NETGEAR

NETGEAR FS205 Manuel utilisateur

NETGEAR

NETGEAR XE104 - 85 Mbps Wall-Plugged EN Switch... Manuel utilisateur

NETGEAR

NETGEAR LG2200-1USNAS Manuel utilisateur

NETGEAR

NETGEAR FS308 - Switch Manuel utilisateur

NETGEAR

NETGEAR Orbi Pro SRR60 Manuel utilisateur

NETGEAR

NETGEAR FE508 - Hub Manuel utilisateur

NETGEAR

NETGEAR R4500 Manuel utilisateur

NETGEAR

NETGEAR WNDR4500 Manuel utilisateur

NETGEAR

NETGEAR DGN2200v3 Manuel utilisateur

NETGEAR

NETGEAR DGN2000 - Wireless Router Manuel utilisateur

NETGEAR

NETGEAR R6900v2 Manuel utilisateur

NETGEAR

NETGEAR DGN2200M - Wireless-N 300 Router Manuel utilisateur

NETGEAR

NETGEAR ME101 - Wireless EN Bridge Network Converter Manuel utilisateur

NETGEAR

NETGEAR Orbi RBR860 Manuel utilisateur

NETGEAR

NETGEAR JNR3210 Manuel utilisateur

NETGEAR

NETGEAR RH348 Manuel utilisateur

NETGEAR

NETGEAR C6300 Manuel de l'opérateur

NETGEAR

NETGEAR FR314 Manuel utilisateur

NETGEAR

NETGEAR WNDR3800 - N600 WIRELESS DUAL BAND GIGABIT ROUTER-Premium... Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur