NETGEAR ProSafe UTM9S Manuel utilisateur

ProSecure Unified Threat Managment

Appliance UTM9S

Wireless Quick Start Guide

No part of this publication may be reproduced, transmitted, transcribed,

stored in a retrieval system, or translated into any language in any form or by

any means without the written permission of NETGEAR, Inc.

Technical Support

Thank you for choosing NETGEAR. To register your product, get the latest

product updates, or get support online, visit us at http://support.netgear.com.

Phone (US only): 1-888-NETGEAR

Phone (Other Countries):

See http://support.netgear.com/app/answers/detail/a_id/984

Trademarks

NETGEAR, the NETGEAR logo, ProSecure, and Connect with Innovation are

trademarks and/or registered trademarks of NETGEAR, Inc. and/or its

subsidiaries in the United States and/or other countries. Information is subject

to change without notice. Other brand and product names are registered

trademarks or trademarks of their respective holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or

reliability, NETGEAR reserves the right to make changes to the products

described in this document without notice. NETGEAR does not assume any

liability that may occur due to the use or application of the product(s) or circuit

layout(s) described herein.

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Default Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Wireless Equipment Placement and Range Guidelines . . . . . . . 6

Configure the Country of Operation . . . . . . . . . . . . . . . . . . . . . . 7

Configure WPA+WPA2 with PSK Security . . . . . . . . . . . . . . . . . 9

Test Wireless Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

For More Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Introduction

This quick start guide provides basic wireless configuration

information for the ProSafe UTM9S. For information about advanced

wireless features, and for complete configuration steps, see the

reference manual at downloadcenter.netgear.com.

Default Wireless Settings

The default wireless settings work well for most wireless networks,

but you must configure the country of operation and wireless security.

The country is initially set to the default country for the world region

where the UTM is sold. You must select the actual country of

operation from the country list. The countries in each region are listed

in alphabetic order. You must also check the correct security setting

for your country.

These are the default settings:

Item Description

Wireless radio Enabled

Region Not configurable. It is set to the region in

which you purchased the wireless UTM.

Country The selection is limited to the countries in the

region in which you purchased the wireless

UTM. The default regional settings are:

•Africa. Algeria

•Asia. Azerbaijan

•Europe. Albania

•Middle East. Bahrain

•North America, Latin America, and The

Caribbean. United States

•Oceania. Australia

Operating frequency Configurable: 2.4 GHz or 5 GHz

Default security profile UTM9S

Default network name

(SSID)

netgear-1

Broadcast SSID Enabled

Security Open

Encryption None

Authentication None

Default transmit power Full

802.11 wireless mode g and b (the default for most countries)

802.11b/g/n radio

frequency channel

Auto

802.11n channel spacing 20 MHz

Beacon interval 100 ms

DTIM interval 2

RTS threshold 2346 bytes

Fragmentation threshold 2346 bytes

Preamble mode Long

Protection mode None

Power save Disabled

Item Description

Wireless Equipment Placement and Range

Guidelines

The range of your wireless connection can vary based on the location

of the wireless UTM. The latency, data throughput performance, and

notebook power consumption of wireless adapters also vary

depending on your configuration choices.

Note: Failure to follow these guidelines can result in significant

performance degradation or the inability to connect wirelessly to the

wireless UTM. For complete performance specifications, see the data

sheet at:

http://prosecure.netgear.com/pdf/datasheets/utm9s_ds.pdf

For best results, place your wireless UTM according to the following

general guidelines:

•Near the center of the area in which your wireless devices

operate.

•In an elevated location such as a high shelf where the wirelessly

connected devices have line-of-sight access (even if through

walls).

•Away from sources of interference such as computers,

microwaves ovens, and 2.4 GHz cordless phones.

•Away from large metal surfaces or water.

•Placing the antennas in the upright position provides the best

horizontal coverage.

•If you are using multiple wireless access points such as the

wireless UTM, it is better if access points use different radio

frequency channels to reduce interference. The recommended

channel space between adjacent access points is five channels

(for example, use Channels 1 and 6, or 6 and 11, or 1 and 11).

•The time that it takes to establish a wireless connection can vary

depending on both your security settings and placement. WEP

connections can take slightly longer to establish. Also, WEP

encryption can consume more battery power on a notebook

computer.

Configure the Country of Operation

The region of operation is not configurable. It is set for the region in

which you purchased the wireless UTM. The selection of the country

is limited to the countries in the region in which you purchased the

wireless UTM. You can also optionally select the operating frequency.

To configure the country and frequency settings:

1. Select Network Config > Wireless Settings > Radio Settings.

The Radio Settings screen displays:

2. Select the country from the Country drop-down list.

3. This step is optional. From the Operating Frequency drop-down

list, select either 2.4 GHz or 5 GHz.

4. Click Apply to save your settings. The wireless UTM reboots.

Note: Other wireless settings that you can configure on the Radio

Settings screen are explained in the “Configure the Basic Radio

Settings” section in Chapter 4, “Wireless Configuration and Security,”

of the reference manual.

Configure WPA+WPA2 with PSK Security

NETGEAR recommends that you configure wireless authentication

and encryption to secure your wireless traffic. WPA+WPA2 with a pre-

shared key (PSK) is easy to configure and works well in most

situations. However, if your network uses 802.11n devices only, select

WPA2 to enable the 802.11n devices to function at full speed.

To configure WPA+WPA2 with PSK security for the default1

wireless profile:

1. Select Network Config > Wireless Settings > Wireless

Profiles. The Wireless Profiles screen displays.

2. Click the Edit button in the Action column for the default1 wireless

profile. The Edit Wireless Profiles screen displays.

3. From the Security drop-down list, select WPA+WPA2.

The Encryption drop-down list automatically selects TKIP+CCMP,

which is the default encryption setting for WPA+WPA2.

4. From the Authentication drop-down list, select PSK.

5. In the WPA Password field, enter a password (also referred to as a

pre-shared key) of at least eight characters.

Autres manuels pour ProSafe UTM9S

Table des matières

Autres manuels NETGEAR Matériel réseau

NETGEAR

NETGEAR RNDP6310 - ReadyNAS Pro NAS Server Manuel utilisateur

NETGEAR

NETGEAR AXM751 - ProSafe XFP Transceiver Module Manuel utilisateur

NETGEAR

NETGEAR ANT24BDC - Power Injector For The 500 mW... Manuel utilisateur

NETGEAR

NETGEAR GS716TP Manuel

NETGEAR

NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub... Manuel utilisateur

NETGEAR

NETGEAR MS2110 - Stora NAS Server Manuel utilisateur

NETGEAR

NETGEAR SSL312-100NAS - ProSafe SSL312 SSL VPN Concentrator... Manuel utilisateur

NETGEAR

NETGEAR UTM10 - ProSecure Unified Threat Management... Instructions d'installation et d'utilisation

NETGEAR

NETGEAR Orbi Pro WiFi 6 Mini router Manuel utilisateur

NETGEAR

NETGEAR STM150 - ProSecure Web And Email Threat Management... Manuel utilisateur

NETGEAR

NETGEAR M6100 Series Guide de l'utilisateur

NETGEAR

NETGEAR XAVB1004 Manuel utilisateur

NETGEAR

NETGEAR UTM5 - ProSecure Unified Threat Management... Manuel

NETGEAR

NETGEAR ReadyNAS RN312 Manuel utilisateur

NETGEAR

NETGEAR RN12P0610 - ReadyNAS 3200 Instructions de montage

NETGEAR

NETGEAR RND4000 - ReadyNAS NV+ NAS Server Guide de l'utilisateur

NETGEAR

NETGEAR RND2175 - ReadyNAS Duo NAS Server Manuel utilisateur

NETGEAR

NETGEAR WN1000RP Manuel utilisateur

NETGEAR

NETGEAR ReadyNAS OS 6 Desktop Storage Systems Manuel utilisateur

NETGEAR

NETGEAR Nighthawk Mesh WiFi 6 System Manuel utilisateur

NETGEAR

NETGEAR UTM5EW-100NAS Manuel utilisateur

NETGEAR

NETGEAR ReadyDATA 5200 Manuel utilisateur

NETGEAR

NETGEAR Sprint Spark Fiche technique

NETGEAR

NETGEAR EX6150 AC1200 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur