NETGEAR CG3000 Fiche d'information produit
A
ITS
GDY
WLEN
H T
YRI
CLME
GNI
NTE
THE INCREDIBLY EASY GUIDE TO SETTING UP
YOUR CG3000 WIFI CABLE MODEM
1
B POWER SUPPLY
F WIRELESS INFORMATION CARD
A CG3000 WIFI CABLE MODEM
Keep me handy
your user information for wireless
Network name: (SSID):
Network Key:
E THE COAXIAL CABLE
(You’ll find this sticking out of your wall)
E INSTALL GUIDE
(The thing you are reading)
G OPTUS CD ROM
C YELLOW ETHERNET
CABLE (1.5M) D GREY PHONE CABLE
Your new WiFi Cable Modem allows you to access your Premium Speed Broadband service wirelessly.
And it can be used to provide your home phone service. Here are all the bits you should have:
MEU
HEIS
A BHD
IMPORTANT INFORMATION FOR CABLE CUSTOMERS: Equipment supplied requires mains power which may not be
suitable if you have a serious illness or condition, require disability services, have a back-to-base alarm,
or require an uninterrupted telephone line, in which case, please give us a shout to discuss other options.
2
FRONT PANEL
The front panel of your WiFi Cable Modem provides status LED’s that indicate how
well and in what state your WiFi Cable Modem is operating. See below table for more
information on front panel LED status indicator functions.
1. POWER ON, power is applied to the WiFi Cable Modem
2. DS ON, the WiFi Cable Modem is receiving data from the Cable network
3. US ON, the WiFi Cable Modem is sending data to the Cable network
4. INTERNET ON, the WiFi Cable Modem is registered on the network and fully operational
5. LAN 1-4 ON, a device is connected to one of the Ethernet ports
BLINKING indicates that data is being transferred over the Ethernet connection
6. TEL1 ON indicates telephony service is enabled. Blinks when line 1 is in use
OFF indicates that phone service for TEL 1 is not enabled
7. TEL2 ON indicates telephony service is enabled. Blinks when line 2 is in use
OFF indicates that phone service for TEL 2 is not enabled
8. WIRELESS LINK
By default, the wireless modem router is set up to work as a wireless access point.
Pressing this button turns the wireless access point feature on and off. You can also
do this through the Wireless Settings screen
9. WPS You can use the WiFi Protected Setup (WPS) feature with clients on the network
that are WiFi certified and WPA capable
1 2 3 4 6 7 8 95
S LO
YRHYNE
WIAEOM
BEFORE YOU INSTALL AND CONNECT YOUR WIFI CABLE MODEM, TAKE A MOMENT TO FAMILIARISE
YOURSELF WITH THE FRONT AND BACK PANELS OF THE MODEM.
WHAT DO THE LIGHTS MEAN?
3
1 2 3 4 5 6
1. TELEPHONE
1 AND 2
RJ-11 telephone ports connect to home telephone,
conventional telephones or fax machines
2. LAN Four RJ-45 Ethernet ports connect to the Ethernet port on your
PC or your home network
3. USB
Connects to a printer or mass storage device. This feature is
currently disabled. This can only be made active by a remote
software upgrade
Note: Your service does not support data connections via USB.
Please connect your computer via the Ethernet port to ensure
optimal connection speed
4. CABLE Coaxial Port connects to an active Cable signal from Optus
5. POWER
Connects your residential gateway to the AC power adapter that
is provided with your WiFi Cable Modem
Caution: Avoid damage to your equipment. Only use the power
supply that is provided with your modem
6. ON/OFF
SWITCH
Turns the device on or off. It is recommended that the device
remains on at all times
WHAT ARE THE PORTS AND SWITCHES?
BACK PANEL
The following picture shows the description and function of the back panel
components on your modem.
4
G E
WIOG
1
2
Locate the WiFi settings on your computer or other device.
These will vary depending on the gadget you’re connecting to.
Give us a shout if you’re having trouble finding them.
Enter the WiFi Network Name (SSID) and Password that’s on
your WiFi card and voila, you’re good to go!
Heads-up: If you choose to customise these settings, your details
will be different to what is printed on your WiFi card. A factory
reset will reverse any settings you’ve customised, e.g. it will
change back to the WiFi Network Name and Password printed on
the WiFi card we sent you.
NOW THAT YOU’VE CONNECTED YOUR WIFI CABLE MODEM, YOU CAN
GET ON WITH SETTING UP ANY OTHER FEATURES YOU MIGHT NEED.
YOUR ACCOUNT
For information on managing your Optus Cable go to:
optus.com.au/helpme
CHANGING YOUR WIFI PASSWORD
If you wish to change your WiFi Cable Modem password, please follow the steps below:
1. Open your web browser and change the address to h t tp: / /19 2.168 .0.1
2. Enter the default username and password as follows:
Default Username: admin
Default Password: password
3. From the menu on the top click Administration and then select the management tab.
4. To change the password, type a new password and retype it in the Re-Enter New
Password box to confirm it. Then click Save settings to have the password changed.
5. Write down your new password and keep it safe. You may want to write it down with
the Settings Summary page if you printed it earlier.
Note: You will need to use this new password to access any of your WiFi Cable
Modem’s advanced features or to reconfigure your service. If you forget this
password you can reset your WiFi Cable Modem by pressing and holding the
reset button for five seconds. This will also delete any other customised settings
you have set.
MAN
YRCU
Keep me handy
your user information for wireless
Network name: (SSID):
Network Key:
5
Q. If I don’t have a landline phone with Optus, can I still use this WiFi Cable Modem to make
and receive phone calls with another provider?
A. Unfortunately no. But give us a bell on 1300 300 693 or visit your nearest
Optus Store and we’ll help you get hooked up.
Q. What should I do if I’m having trouble connecting?
A. Like any IT guru will tell you, first try restarting your modem by switching off the power on
the back, wait 10 seconds, then turn it back on again. Give it a few minutes to restart and
reset your connection. If you’re still having trouble, give us a shout on 1300 300 693.
Q. What if I can’t make or receive calls?
A. First, try restarting your modem by switching off the power on the back,
wait 10 seconds, then turn it back on again. Give it a few minutes to restart
and reset your connection. If you’re still having trouble, give us a shout on 1300 300 693.
Q. I’ve just received my shiny new modem. Do I need to call Optus first?
A. No. Just read the instructions and everything should be sweet.
Q. I’ve forgotten my WiFi password. What do I do?
A. Don’t panic! The default WiFi Network Name (SSID) and Password can be found
on the Wireless Information Card in the box. It’s also on the bottom of the modem.
If you’ve changed this, you can reset it to default by factory resetting your modem.
To do this, press the Factory Reset Button on the back for 7 seconds and wait for
the modem to reboot.
Q. I’ve forgotten the firmware password. What do I do?
A. The firmware can be accessed at http://192.168.0.1. The default username is ‘admin’
and password is ‘password’. If these don’t work, factory reset the modem by holding
the Factory Reset Button on the back for 7 seconds and wait for the modem to reboot.
Q. I need further help configuring the modem, for example with advanced WiFi features.
A. Tech-head huh? Download the full modem user guide at optus.com.au/helpme
GOT ANY ISSUES, PROBLEMS OR HEAD-SCRATCHERS?
IE
HP
WE HAVE FAITH THAT YOU CARRIED OUT
YOUR TASK SPLENDIDLY.
BUT, IN CASE YOU NEED A LITTLE HELP,
PLEASE CONTACT OUR CABLE TECHNICAL
SUPPORT AT 1300 300 693 OR VISIT
OPTUS.COM.AU/HELPME
ERHG
’ N
F HS
I
ME
OP TUS16714/1402302 (10/13)
Autres manuels pour CG3000
1
Table des matières
Autres manuels NETGEAR Modem
NETGEAR
NETGEAR DM111PSPv2 Manuel utilisateur
NETGEAR
NETGEAR Nighthawk CM2050V Manuel utilisateur
NETGEAR
NETGEAR D3600? D6000 Manuel utilisateur
NETGEAR
NETGEAR DM200 Manuel utilisateur
NETGEAR
NETGEAR DGND3800B Manuel utilisateur
NETGEAR
NETGEAR CM400 Manuel utilisateur
NETGEAR
NETGEAR CM1100 Manuel utilisateur
NETGEAR
NETGEAR CM600 Manuel utilisateur
NETGEAR
NETGEAR DM602 - ADSL-Modem - 8 Mbps DSL Modem Manuel utilisateur
NETGEAR
NETGEAR DGND3700v2 Manuel utilisateur
NETGEAR
NETGEAR 341U Manuel utilisateur
NETGEAR
NETGEAR AC1750 Manuel utilisateur
NETGEAR
NETGEAR CM500 Manuel utilisateur
NETGEAR
NETGEAR C6250 Manuel utilisateur
NETGEAR
NETGEAR DG834N Manuel utilisateur
NETGEAR
NETGEAR C6250 Manuel utilisateur
NETGEAR
NETGEAR CG834WG Manuel utilisateur
NETGEAR
NETGEAR DG834Gv2 - 54 Mbps Wireless ADSL Firewall... Manuel utilisateur
NETGEAR
NETGEAR DG834PN - RangeMax ADSL Modem Wireless... Manuel utilisateur
NETGEAR
NETGEAR Nighthawk X4S D7800 Manuel utilisateur
Manuels Modem populaires d'autres marques
Davicom
Davicom DM562AP Manuel utilisateur
EpiValley
EpiValley TATA indicom SXC-1080 Manuel utilisateur
Zte
Zte WiMAX Manuel utilisateur
Intelimax
Intelimax MA-2060 Manuel utilisateur
SMC Networks
SMC Networks D3CM1604V Manuel d'utilisation et d'entretien
Telstra
Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur
US Robotics
US Robotics 3453C Manuel utilisateur
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur
Zte
Zte MF823 Manuel utilisateur
Four-Faith
Four-Faith F1403 Manuel utilisateur
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manuel utilisateur
Gemtek
Gemtek WiMAX WIXFBR-103 Manuel utilisateur