NetComm HS1200N Manuel utilisateur

On-Demand User Application

Programming Interface (API)

HS1200N

2 of 10

On-Demand User Application Programming Interface (API)

Important Notice

This device, like any wireless device, operates using radio signals which cannot guarantee the transmission and reception of

data in all conditions. While the delay or loss of signal is rare, you should not rely solely on any wireless device for emergency

communications or otherwise use the device in situations where the interruption of data connectivity could lead to death,

personal injury, property damage, data loss, or other loss. NetComm Wireless accepts no responsibility for any loss or

damage resulting from errors or delays in transmission or reception, or the failure of the NetComm Wireless HS1200N to

transmit or receive such data.

The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated,

transcribed, reproduced, in any form, or by any means without prior written consent of NetComm Wireless.

Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners.

Specifications are subject to change without notice. Images shown may vary slightly from the actual product.

Note – This document is subject to change without notice.

HS1200N

3 of 10

Document history

This document covers the following products:

•HS1200N

•HS1200NPAK

Ver. Document description Date

v1.0 Initial document release January 2018

Table i. - Document revision history

4 of 10

On-Demand User Application Programming Interface (API)

Contents

Feature Description ............................................................................................................................................................................. 5

On-Demand Manager API account....................................................................................................................................................... 6

Enabling/Creating On-Demand Manager API account ......................................................................................................................................................6

On-Demand API Functions ...................................................................................................................................................................7

Creating On-Demand-User Account..................................................................................................................................................................................8

Example: ....................................................................................................................................................................................................................8

Reply from the On-Demand API:................................................................................................................................................................................8

Querying an existing on-demand account information ........................................................................................................................ 9

Deleting an On-Demand Account....................................................................................................................................................... 10

HS1200N

5 of 10

Feature Description

The On-Demand API is a powerful feature that can be utilized for Hotspot services. Instead of tickets, clients would be able to

obtain On-Demand accounts through third-party POS systems (such as a Kiosk or Point of Sales Management Systems). This

Application Note aims to give network administrators a better understanding of the concept behind this feature and how it

can be integrated with third-party POS systems.

On-Demand Accounts can be created/deleted with an external API without the Management UI. This is convenient, especially

for integration with POS systems.

The On-Demand API system utilizes parameters in the URL to create accounts and these parameters are to be defined on the

Third-Party System. Once the URL with parameters are sent to the Hotspot Gateway API manager, the Hotspot Gateway On-

Demand API will reply in HTML format as a generated string.

Note: NetComm Wireless does not provide support for integration with third-party POS systems.

6 of 10

On-Demand User Application Programming Interface (API)

On-Demand Manager API account

Enabling/Creating On-Demand Manager API account

1Navigate to Utilities > Administrator Account

2Generate an “OnDemand Manager” account

aCreate a username

bCreate a password

cEnsure "OnDemand Manager" is the group type

dClick “Apply”.

3Your On-Demand Manager account will be created.

4Connect your On-Demand Manager PC/POS/Kiosk to the LAN “Private zone” of the Hotspot Gateway.

HS1200N

7 of 10

On-Demand API Functions

On-Demand API

(Parameters from Kiosk to the Hotspot Gateway)

Adm The On-Demand Manager Administration Username

Pwd The On-Demand Manager Administration Password

Type Function of use (create, query, delete)

Phone Cell phone number or an external reference number

Eg. Room number (0 if not required)

Plan Billing Plan in use (1~10)

Unit Unit of selected Billing Plan

Auto Account/Password automatic creation

1: System generated

0: Created Manually (to include parameters uname, upwd)

Uname (optional)

Manually created Username (system generated if left empty)

Upwd (optional) Manually created Password

8 of 10

On-Demand User Application Programming Interface (API)

Creating On-Demand-User Account

Example:

The Kiosk transmits the following URL parameter to the Hotspot Gateways as such:

https://192.168.110.1/Utilities/sms.shtml?adm=pos1&pwd=pos1password&type=create&phone=0&p

lan=1&unit=1&auto=1

In this Example:

HTTPS: Encrypts the URL request (On-Demand API supports both HTTPS and HTTP)

Gateway IP Address: 192.168.110.1

On-Demand Manager Admin username (Adm): pos1

On-Demand Manager Admin password (Pwd): pos1password

URL Function Type (Type): create (Create an on-demand-user)

Cell phone number or an external reference number (eg room number) (Phone): 0 (not required)

Billing Plan Number (Plan): 1 (create billing plan 1)

Number of Billing Plan unit to create (Unit): 1 (create 1 unit on billing plan)

On-Demand-User Username/Password (Auto): 1(system generate the username and password)

Specific On-Demand-User Username (Uname): not used (specifies the username to use)

Specific On-Demand-User Username (Upwd): not used (specifies the password to use)

Reply from the On-Demand API:

gen_str:3737@wccptest,338m23xr,1515456218,0,0,1 day(s) of connection time quota with

expiration,10,6,864000,0,1,86400,

gen_str: “A generated String”

3737:“On-Demand-User Username”

338m23xr :“On-Demand-User Password”

1515456218 :“UNIX time: First log in must be done before this time” = Tue, 09 Jan 2018 00:03:38 GMT

0 :“UNIX time: First Login/Activation time” 0 = account has not been used/activated

0 :“UNIX time: Account expiration time” 0 = account has not been used/activated

1 day(s) of connection time quota with expiration :“Quota: 1 day of connection” Refer to your billing plan settings

HS1200N

9 of 10

10 :“Price: This billing plan was $10” Refer to your billing plan settings

6 :“On-Demand-User Reference number”

864000 :”Duration: Billing Plan Quota will expire in 864000 Seconds (10 Days)”

0 :”Phone number/External Reference number: 0 (N/A)”

1 :”Unit(s): 1 unit on this billing plan”

86400 :”Remaining Duration: 86400 Seconds (1 Day)”

Querying an existing on-demand account information

To query for a created account, only 4 parameters (adm, pwd, type, and uname) are needed.

The Kiosk transmits the following URL parameter to the Hotspot Gateway as such:

Example:

https://192.168.110.1/Utilities/sms.shtml?adm=pos1&pwd=pos1password&type=query&uname=3737

In this Example:

HTTPS: Encrypts the URL request (On-Demand API supports both HTTPS and HTTP)

Gateway IP Address: 192.168.110.1

On-Demand Manager Admin username (Adm): pos1

On-Demand Manager Admin password (Pwd): pos1password

URL Function Type (Type): query (query for an on-demand-user account)

Specific an On-Demand-User Username to query (Uname): 3737

Reply from the On-Demand API:

3737,338m23xr,TIME,0,86400,1515456218,0,0,864000,1,0,1,0,0,USAGE-REL,

The following parameter information will be displayed:

Username, Password, Quota Type, Status, Available Quota, Validate Time, Expiration Time, Duration days, Duration seconds,

Unit, Grace Period, Class, External ID, Activation Time, Sub Type, Reference, Max Multiple Users

3737:“On-Demand-User Username”

10 of 10

On-Demand User Application Programming Interface (API)

338m23xr :“On-Demand-User Password”

TIME :”Billing Plan type, Time duration”

0 :”Status: The account is still active”

86400 : “The Available Quota left = 86400 Seconds left (1 Day)”

1515456218 :“UNIX time: First log in must be done before this time” = Tue, 09 Jan 2018 00:03:38 GMT

0 :“UNIX time: First Login/Activation time” 0 = account has not been used/activated

0 :“UNIX time: Account expiration time” 0 = account has not been used/activated

1 day(s) of connection time quota with expiration :“Quota: 1 day of connection” Refer to your billing plan settings

10 :“Price: This billing plan was $10” Refer to your billing plan settings

6 :“On-Demand-User Reference number”

864000 :”Duration: Billing Plan Quota will expire in 864000 Seconds (10 Days)”

1 : “1 Unit of Billing Plan”

0 : “Grace period: refer to your billing plan settings for grace periods”

1 : “On-demand-user profile: Group 1”

0 : “Phone number/External Reference number on record: 0 = N/A”

0 : “UNIX time: Activation time and date”

Deleting an On-Demand Account

To delete an On-Demand Account, only 4 parameters (adm, pwd, type, and uname) are needed.

The Kiosk transmits the following url parameter to the Hotspot Gateway as such:

https://192.168.110.1/Utilities/sms.shtml?adm=pos1&pwd=pos1password&type=delete&uname=373

Using this command to delete Account with Username “3737”

Unlike “create” and “query”, deleting accounts will not return any confirmation.

Autres manuels pour HS1200N

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NetComm Routeur sans fil

NetComm

NetComm NTC-30WV Manuel utilisateur

NetComm

NetComm NB16WV Manuel utilisateur

NetComm

NetComm NTC-6000 SERIES Manuel utilisateur

NetComm

NetComm VELOCITY NP805N Manuel utilisateur

NetComm

NetComm LIBERTY SERIES Manuel utilisateur

NetComm

NetComm NB8W Manuel utilisateur

NetComm

NetComm NF7 Manuel utilisateur

NetComm

NetComm Dynalink 3G8WV Manuel utilisateur

NetComm

NetComm NF8AC Manuel utilisateur

NetComm

NetComm NB16DG Manuel utilisateur

NetComm

NetComm MyZone YML24W-RAU Manuel utilisateur

NetComm

NetComm NF2 Manuel utilisateur

NetComm

NetComm N3G002W Manuel utilisateur

NetComm

NetComm VELOCITY NP805N Manuel d'exploitation

NetComm

NetComm T1 Manuel utilisateur

NetComm

NetComm NB14WN Manuel utilisateur

NetComm

NetComm N150 Manuel utilisateur

NetComm

NetComm N300 GATEWAY SERIES Manuel utilisateur

NetComm

NetComm VELOCITY NP805N Manuel utilisateur

NetComm

NetComm LIBERTY SERIES Manuel utilisateur

NetComm

NetComm NB9WMAXX Guide de démarrage rapide

NetComm

NetComm N3G001W Manuel utilisateur

NetComm

NetComm 3G21WE Manuel utilisateur

NetComm

NetComm NB16WV Manuel d'exploitation

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur