NetComm NB16WV Manuel utilisateur

NB16WV VOIP Setup

Guide

(for Internode)

Configuring yo u r NB16WV for VO I P Service

The following steps will take you through the process of setting up your VOIP connection.

Step 1: Checking Computer Net ork Settings:

You will need to connect your computer directly to your VOIP device (modem or ATA) and set

the network connection on your computer to obtain an IP address automatically. Please follow

the instructions appropriate for your operating system below:

Below are the instructions for setting Windows XP to obtain an IP address automatically for

your ethernet connection:

1. Click on the Start Menu and go to “Control Panel”.

2. Click on “Net ork Connections”.

(If you only see "Net ork and Internet Connections" open that first and then click on

"Net ork Connections".)

3. Right click on “Local Area Connection” and select “Properties”.

4. Double-click on “Internet Protocol”.

5. Select "Obtain an IP address automatically" and "Obtain DNS server

address automatically".

6. Click “OK” and then click “OK” (or “Close”).

Below are the instructions for setting Windows Vista to obtain an IP address automatically for

your ethernet connection:

1. Click on the Start Menu and go to “Control Panel”.

2. Click on “Net ork and Sharing Centre”.

(If you only see "Net ork and Internet" open that first and then click on "Net ork and

Sharing Centre".)

3. Click on “Manage net ork connections” (

on the lefthandside of the window

).

4. Right click on “Local Area Connection” and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Obtain an IP address automatically" and "Obtain DNS server

address automatically".

7. Click “OK” and then click “OK” again.

Below are the instructions for setting Windows 7 to obtain an IP address automatically for your

ethernet connection:

1. Click on the Start Menu and go to “Control Panel”.

2. Click on “Net ork and Sharing Centre”.

(If you only see "Net ork and Internet" open that first and then click on "Net ork and

Sharing Centre".)

3. Click on “Change adapter settings” (

on the lefthandside of the window

).

4. Right click on “Local Area Connection” and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Obtain an IP address automatically" and "Obtain DNS server

address automatically".

7. Click “OK” and then click “OK” again.

Below are the instructions for setting Mac OS X to obtain an IP address automatically for your

ethernet connection:

1. Click on the Apple Menu and go to "System Preferences".

2. Click on "Net ork".

3. Click on “Ethernet” or "Built-in Ethernet".

4. Click on the "Configure" drop-down box and select "Using DHCP" then click

"Apply".

Registrar sip.internode.on.net or as otherwise directed

by Internode.

Use Outbound Server Enable or Disable according to your VoIP

account type. If you are unsure consult

Internode.

Outbound Proxy sip.internode.on.net or as otherwise directed

by Internode.

Subscribe for MWI (Message Waiting Indicator) Enable or disable as per Internode’s

instructions (if the VoIP account has this

feature enabled).

Refresh Time for MWI Leave as default (360) or as per Internode’s

instructions.

MWI Server URL Leave as default or as directed by Internode.

5.

After entering all required fields click on the “Save” button and check the Status at the

bottom of the page. The status should change to “Registered” if all the settings entered

are correct and you have a current connection to the internet.

6. Check for a dial tone on your phone handset. The VoIP account should now be active and

you should now be able to make and/or receive VoIP phone calls (depending on the type

of VoIP account you are using).

Autres manuels pour NB16WV

7

Table des matières

Autres manuels NetComm Routeur sans fil

NetComm

NetComm NB16WV Manuel d'exploitation

NetComm

NetComm NB604N Manuel utilisateur

NetComm

NetComm N300 GATEWAY SERIES Manuel utilisateur

NetComm

NetComm N300 GATEWAY SERIES Manuel utilisateur

NetComm

NetComm Liberty 3G17Wn Manuel utilisateur

NetComm

NetComm 802.11 Manuel utilisateur

NetComm

NetComm 4G100W-01 Manuel utilisateur

NetComm

NetComm HS1200N Manuel utilisateur

NetComm

NetComm HS1100N Manuel utilisateur

NetComm

NetComm FIBRE NF3ADV Manuel utilisateur

NetComm

NetComm NB7 Manuel utilisateur

NetComm

NetComm Videotron 3G36W-V Manuel utilisateur

NetComm

NetComm LIBERTY SERIES Manuel utilisateur

NetComm

NetComm NB5580W Manuel utilisateur

NetComm

NetComm NB16DG Manuel utilisateur

NetComm

NetComm NetComm Gateway Series Manuel utilisateur

NetComm

NetComm NTC-140W Series Manuel utilisateur

NetComm

NetComm 3G21WE Manuel utilisateur

NetComm

NetComm N3G001W Manuel utilisateur

NetComm

NetComm NTC-5908 Manuel utilisateur

NetComm

NetComm NB8W Manuel utilisateur

NetComm

NetComm 3GM1WN Manuel utilisateur

NetComm

NetComm 3G10WVR Manuel utilisateur

NetComm

NetComm N3G002W Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur