NetComm NL1901ACV Manuel de service

Restore Factory Defaults Settings Guide

NL1901ACV

NL1901ACV – Restore Factory Defaults Settings Guide

1 of 4

FQ01131 v. 1.1 March 2019

About Factory Resets

A factory reset on the NL1901ACV returns all settings to the default settings as it was when shipped from the

factory.

Important

– It is particularly important to perform a factory reset after upgrading the NL1901ACV firmware to ensure the firmware

installation is completed correctly.

Factory Reset Methods

There are two methods that can be used to perform a successful factory reset:

Use the NL1901ACV's graphical user interface (GUI) to complete a factory reset.

Manually perform a factory reset using the reset pinhole at the back of the NL1901ACV.

This guide will explain both methods to complete a successful factory reset.

NL1901ACV – Restore Factory Defaults Settings Guide

2 of 4

FQ01131 v. 1.1 March 2019

Web Interface Factory reset

Connect a computer and the NL1901ACV using an Ethernet cable. (A yellow Ethernet cable was provided with your

NL1901ACV).

1Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address

bar and press Enter.

http://192.168.20.1

2Enter the following credentials in the User Name and Password fields:

User Name: admin

Password: The serial number found on the label on the back of the device

3Click the Login button.

Note

– If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web User

Interface guide from FAQs section.

NL1901ACV – Restore Factory Defaults Settings Guide

3 of 4

FQ01131 v. 1.1 March 2019

Restore Default Settings from Web interface

1From the Management menu on the left-hand side of the screen select the Settings option and then select

the Factory Reset option from its sub-menu.

2The Tools -- Restore Default Settings screen displays:

Tools – Restore Default Settings screen

3To reset the NL1901ACV to its factory settings, click the Restore Default Settings button.

4A pop-up dialog box will prompt: “Are you sure you want to restore factory default settings?”

Reset command confirmation dialog

5Click OK to confirm the reset.

6The NL1901ACV will reboot.

7After the NL1901ACV has rebooted you will need to log in to the NL1901ACV and re-enter your broadband

connection settings such as your ADSL/VDSL User ID and Password, etc.

NL1901ACV – Restore Factory Defaults Settings Guide

4 of 4

FQ01131 v. 1.1 March 2019

Manual Factory Reset

1Ensure the NL1901ACV is powered on.

2On the back side of the NL1901ACV, there is a small hole in the plastic with the word “Reset” printed at the

bottom.

This is the recessed reset button:

Back panel of NL1901ACV showing Reset pinhole

3Insert the end of a paper-clip or other rigid, thin piece of metal into the Reset pinhole and depress and hold

in for 10-12 seconds.

If this does not happen:

aDisconnect the power supply cable for 30 seconds and then reconnect it.

bThen depress the Reset button and hold in for 10-12 seconds.

4The NL1901ACV is back to its factory defaults, you now need to reconfigure the broadband settings via the

user interface.

Note

– If you have backed up your configuration, then you can restore your settings by uploading your

.config

file.

To reconfigure:

1. Open a web browser (such as Internet Explorer, Google Chrome or Firefox),

2. Type http://192.168.20.1 into the address bar, and

3. Press

Enter.

5At the login screen, type the username/password and click Log In. The Default username and password are

printed on the sticker attached to the back of the router.

Autres manuels pour NL1901ACV

Table des matières

Autres manuels NetComm Routeur réseau

NetComm

NetComm N3G005W Manuel utilisateur

NetComm

NetComm NB1300 Instructions d'installation et d'entretien

NetComm

NetComm NB5PLUS4W Guide de démarrage rapide

NetComm

NetComm NF5 Manuel utilisateur

NetComm

NetComm 3G27WV-R Manuel d'exploitation

NetComm

NetComm NB5PLUS4W Manuel utilisateur

NetComm

NetComm Dynalink NP800 Series Manuel utilisateur

NetComm

NetComm Dynalink WSG-NP804n Manuel utilisateur

NetComm

NetComm 3G15Wn Manuel utilisateur

NetComm

NetComm G.SHDSL 4-port Security Modem Routers NB712 Manuel utilisateur

NetComm

NetComm V300 Manuel utilisateur

NetComm

NetComm NTC-220 Guide de démarrage rapide

NetComm

NetComm NB2800 Manuel utilisateur

NetComm

NetComm Liberty Series 3G18Wn Manuel utilisateur

NetComm

NetComm NTC-220 Guide de démarrage rapide

NetComm

NetComm ROUTER WITH VOICE 3G10WV Manuel utilisateur

NetComm

NetComm NF8AC Comment utiliser

NetComm

NetComm NP2005HS Manuel utilisateur

NetComm

NetComm NTC-400 Series Manuel utilisateur

NetComm

NetComm NB604N Manuel utilisateur

NetComm

NetComm 3GM1WN Manuel utilisateur

NetComm

NetComm NB750 Manuel utilisateur

NetComm

NetComm NWL-11 Manuel utilisateur

NetComm

NetComm V100 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité