Neilsen CT1056 Manuel utilisateur
AUTO RETRACTABLE AIR HOSE REEL 3/8” x 30FT
CT1056
ORIGINAL INSTRUCTIONS
SAVE THESE INSTRUCTIONS AND PRECAUTIONS.
READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the following machine complies with the appropriate basic safety
and health requirements of the EC Directive based on its design and type, as
brought into circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration
will lose its validity.
Product description: AUTO RETRACTABLE AIR HOSE REEL
Model: CT1056
Applicable EC Directives:
EC Machinery Directive 2006/42/EC
Harmonized standards
EN ISO 12100:2010
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director
CANNON TOOLS LTD
2020-12-17
1. SPECIFICATION
Model: CT1056
Air hose size: 3/8” x 30ft
Air adaptor: 3/8”
Max. Working pressure: 300PSI
2. IMPORTANT SAFETY INFORMATION
WARNING - When using tools, basic precautions should always be followed,
including the following:
To reduce the risks of electric shock, fire, and injury to persons, read all the
instructions before using the tool.
Work Area
1. Keep the work area clean and well lighted. Cluttered benches and dark areas
increase the risks of electric shock, fire, and injury to persons.
2. Keep bystanders, children, and visitors away while operating the tool.
Distractions are able to result in the loss of control of the tool.
Personal Safety
1. Stay alert. Watch what you are doing and use common sense when operating
the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating the tool increases the risk of
injury to persons.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long
hair increases the risk of injury to persons as a result of being caught in moving
parts.
3. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the tool in unexpected situations.
4. Use safety equipment.
5. Always wear eye protection.
Tool Use and Care
1.Do not force the tool. Use the correct tool for the application. The correct tool
will do the job better and safer at the rate for which the tool is designed.
2.Disconnect the tool from the air source before making any adjustments,
changing accessories, or storing the tool. Such preventive safety measures
reduce the risk of starting the tool unintentionally.
3. DO NOT EXCEED 300PSl incoming air pressure (from compressor).
4. Do not release hose when rewinding. Hold hose end and allow nose to rewind
slowly.
5. Never allow children to use hose reel. Keep children clear of work area at all
times.
6. Store the tool when it is idle out of reach of children and other untrained
persons. A tool is dangerous in the hands of untrained users.
7.Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that affects the tool’s operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
There is a risk of bursting if the tool is damaged.
8. Use only accessories that are identified by the manufacturer for the specific
tool model. Use of an accessory not intended for use with the specific tool model,
increases the risk of injury to persons.
3. TECHNICAL DESCRIPTION
4. UNPACKING AND CHECKING
Carefully remove the product from the packaging and examine it for any sign of
damage that may have happened during shipping. Lay the contents out and
check them against the parts shown below. If any part is damaged or missing;
please contact the seller and do not attempt to use the product.
5. TYPICAL COMPRESSED AIR SYSTEM
6. OPERATING AIR HOSE REEL
BEFORE MOUNTING AIR HOSE REEL, please take a few minutes to
understand how the reel works. Practice operating the hose reel a few times,
pulling hose out and retracting it back onto reel. This will familiarize you with
basic functions and can help you understand where best to mount the air hose
reel.
Note: Mounting hardware is not included and must be purchased separately.
Decide first where reel will be mounted before purchasing hardware.
Different mounting positions require different types of hardware.
REPOSITIONING BRACKET
1.Remove the Bolts on the Support Post and reposition to move the guide rollers,
if needed, for the desired mounting location (wall, floor or ceiling).
2.Replace the Bolts and tighten.
MOUNTING HOSE REEL
Choosing a Location
DO NOT MOUNT HOSE REEL OUTDOORS OR ON VEHICLE.
This hose reel is not designed to resist constant exposure to
weather or continuous vibration. Mount under cover in an area not
directly exposed to weather.
Reel can be mounted on the floor, ceiling, or wall, wherever it is convenient.
When choosing a location,remember that you can only mount reel to a
load-bearing structural member capable of supporting combined weight of reel,
hose, and forces caused by pulling or manuevering hose. Mounting reel near air
compressor may be desirable since you can connect the two with a shorter, less
expensive length of hose. Also, air compressor controls will be conveniently
nearby.
ADJUSTING THE GUIDE ARM
1. Pull out 3-4 feet of hose and
lock reel in position.
3. Rotate guide arm in 90oincrements to desired position. Replace four bolts and
tighten.
Continue by choosing proper mounting hardware. Mount reel using four 1/2"
bolts secured through four slots in mounting base. Use washers on mounting
bolts to help bear weight of reel.
ADJUSTING HOSE STOPPER POSITION
The hose stopper determines the length of hose that remains outside of reel. To
adjust stopper position, first pull hose out past the desired position of hose
stopper. Lock reel in position. Loosen (but do not remove) both stopper bolts just
enough so stopper can slide along hose. Move stopper to desired position.
Tighten stopper bolts until hose stopper cannot slide. Do not overtighten bolts.
2. Remove the four bolts connecting
guide arm to base.
GENERAL OPERATING INSTRUCTIONS
1. Slowly pull hose from reel to desired length. A ratcheting mechanism inside
reel makes a short series of clicking sounds every half revolution of reel.
2. To lock reel in position, listen for clicking sounds as hose is slowly pulled from
reel.When reel clicks,stop pulling hose. Decrease tension on hose and reel
should lock in position.
3. To retract hose onto reel, slowly pull out hose until series of clicking sounds
stops (1/8 revolution).
DO NOT LET GO OF HOSE! Allow hose to retract slowly until hose stopper rests
against hose guide.
4. Periodically check the hose for excessive wear and hose connections for air
leaks.
5. Attach a coupler (sold separately) to your air compressor hose and apply
thread seal tape to the Inlet fitting on the Reel. Connect the coupler to the Inlet
fitting.
6. Connect your air tool to the other end of the Hose using another coupler and
thread seal tape.
7. Follow all instructions from the air tool and compressor for set up and use.
8. When finished using the Hose, disconnect the air tool and retract the hose.
Wipe the Hose Reel clean with a dry cloth.
7. MAINTENANCE
CLEANING, MAINTENANCE, AND LUBRICATION
1. BEFORE EACH USE, inspect the general condition of the tool. Check for:
•loose hardware or housing,
•misalignment or binding of moving parts,
•cracked or broken parts, and any other condition that may affect its safe
operation.
2.AFTER EACH USE, re-wind the hose onto the reel and wipe the Hose Reel
clean with a dry cloth.
HOSE REPLACEMENT
1.Remove the Hose Stopper from the hose and set aside.
2.Pull out the old Hose and securely lock the Hose Reel.
3.Disconnect the old hose from the swivel joint and remove the hose.
4.Run the new hose through the Guide Roller and through the opening in the
drum flange.
5.Use thread seal tape on the hose fitting threads and screw the fitting onto the
swivel and tighten.
6.Attach the Hose Stopper on the end of the Hose near the Outlet fitting.
7.Carefully release the Drum Latch and allow the Hose to wind onto the reel,
evenly distributing the Hose across the Reel.
WARNING
•To prevent serious injury：
Detach air supply from this product before performing any inspection,
maintenance, or cleaning procedures.
•To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise, vibration, or leaking air
occurs, have the problem corrected before further use.
NOTICE
•These procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the Hose Reel.
WARNING
•Internal spring is not user serviceable or user-replaceable.
Table des matières
Autres manuels Neilsen Outils
Neilsen
Neilsen CT2247 Manuel utilisateur
Neilsen
Neilsen CT4852 Manuel utilisateur
Neilsen
Neilsen CT2102 Manuel utilisateur
Neilsen
Neilsen CT5202 Manuel utilisateur
Neilsen
Neilsen CT4621 Manuel utilisateur
Neilsen
Neilsen NAH-A30B Manuel utilisateur
Neilsen
Neilsen CT2737 Manuel utilisateur
Neilsen
Neilsen VAG CT5467 Manuel utilisateur
Neilsen
Neilsen CT4790 Manuel utilisateur
Neilsen
Neilsen CT1533 Manuel utilisateur
Neilsen
Neilsen CT4188 Manuel utilisateur
Neilsen
Neilsen CT0527 Manuel utilisateur
Neilsen
Neilsen CT3583 Manuel utilisateur
Neilsen
Neilsen CT0676 Manuel utilisateur
Neilsen
Neilsen CT4448 Instructions de fonctionnement
Neilsen
Neilsen CT5271 Manuel utilisateur
Neilsen
Neilsen OPEL VAUXHALL CT2909 Manuel utilisateur
Neilsen
Neilsen CT4694 Manuel utilisateur
Neilsen
Neilsen CT0729 Instructions de fonctionnement
Neilsen
Neilsen CT0933 Manuel utilisateur
