Neilsen CT0527 Manuel utilisateur

ENGINE TIMING TOOLS FOR VAG 1.2 TSI / TFSI

CT0527

INSTRUCTION MANUAL

GENERAL

For adjusting the timing during replacement of the timing chain, renewing of the

cylinder head gasket, etc.

Applications:

Audi models A1 and A3

VW New Beetle, Caddy, Golf, Jetta, Polo, Touran

Skoda Fabia, Fabia Combi, Wildwasser,

Oktavia,Roomster, Yeti

Seat Altea, Ibiza, Leon, Toledo

Engine codes: CBZA, CBZB, CBZC

CONTENTS

1. Camshaft Setting Tool,

to be used as OEM T10414

2. Guide Pins,

to be used as OEM T10341

3.Crankshaft Locking Bolt,

to be used as OEM T10340

SAFETY INSTRUCTIONS

• Do not use the tool if parts are missing or damaged.

• Use the tool for the intended purpose only.

• Never place the tool on the vehicle battery. There is a risk of a short circuit.

• Be careful when working with the engine running. Loose clothing, tools and

other objects can be caught by rotating parts and cause serious injury.

• Keep children and other unauthorized persons away from the work area.

• Do not allow children to play with the tool or its packaging.

• Be careful when working on hot engines because of the risk of burn injuries.

• If you remove the ignition key before repairing, you can prevent the engine from

being started accidentally and resulting in engine damage.

• This manual serves as a brief guide and does not replace a workshop manual.

Always refer to the vehicle-specific service literature, particularly the technical

data such as torque values and instructions for disassembly/assembly, etc.

• After repair or before starting the engine, turn a minimum of 2 turns by hand and

check the timing again.

• Turn the engine only in the normal direction of rotation (clockwise unless

otherwise specified).

• Do not use locking tools for camshaft and crankshaft as a counter-holder,

during loosening or tightening screws on pulleys, camshafts or crankshafts. This

can damage tools and engine components. Only use tools that are suitable for

this purpose.

INSTRUCTIONS FOR USE

Camshaft Setting Tool (1),

to be used as OEM T10414

•Align the camshaft slot by turning the

camshaft.

• Insert the tool and fix it with the screw.

Guide Pins (2),

to be used as OEM T10341

On compressor models, use the guide

pins instead of the mounting screws (A)

to guide the compressor up and down.

Crankshaft Locking Bolt (3),

to be used as OEM T10340

• Insert the crankshaft fixing bolt into the opening provided.

Note: The crankshaft fixing bolt only fixes the crankshaft in normal direction of

motor rotation. The end of the crankshaft fixing bolt must be specially designed

for this touch the intended surface on the crankshaft.

• If the crankshaft fixing bolt cannot be fully inserted, this means that the

crankshaft is not in the correct position.

• Remove the crankshaft fixing bolt and turn the crankshaft approx. 90 ° in the

normal direction of rotation of the engine keep turning.

• Insert the crankshaft fixing bolt up to the stop.

• Continue turning the crankshaft in the direction of engine rotation until it rests

against the crankshaft fixing bolt.

• Tighten the crankshaft fixing bolt to 30 Nm.

CANNON TOOLS LTD

Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.

www.cannontools.co.uk

Table des matières

Autres manuels Neilsen Outils

Neilsen

Neilsen CT1057 Manuel utilisateur

Neilsen

Neilsen CT4790 Manuel utilisateur

Neilsen

Neilsen CT5202 Manuel utilisateur

Neilsen

Neilsen CT1533 Manuel utilisateur

Neilsen

Neilsen CT0933 Manuel utilisateur

Neilsen

Neilsen CT4342 Manuel utilisateur

Neilsen

Neilsen NAH-A30B Manuel utilisateur

Neilsen

Neilsen CT1056 Manuel utilisateur

Neilsen

Neilsen CT3073 Manuel utilisateur

Neilsen

Neilsen CT2737 Manuel utilisateur

Neilsen

Neilsen CT4794 Manuel utilisateur

Neilsen

Neilsen CT3583 Manuel utilisateur

Neilsen

Neilsen CT2247 Manuel utilisateur

Neilsen

Neilsen CT0676 Manuel utilisateur

Neilsen

Neilsen CT4621 Manuel utilisateur

Neilsen

Neilsen CT4188 Manuel utilisateur

Neilsen

Neilsen CT4852 Manuel utilisateur

Neilsen

Neilsen OPEL VAUXHALL CT2909 Manuel utilisateur

Neilsen

Neilsen CT4793 Manuel utilisateur

Neilsen

Neilsen CT4694 Manuel utilisateur

Neilsen

Neilsen CT1535 Manuel utilisateur

Neilsen

Neilsen VAG CT5467 Manuel utilisateur

Neilsen

Neilsen CT2266 Manuel utilisateur

Neilsen

Neilsen CT2102 Manuel utilisateur

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

BGS technic

BGS technic 8578 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser