NEC DDXXEE SSeerriieess Manuel utilisateur

NEC INFRONTIA ISDN BUSINESS COMMUNICATION SYSTEM

Nothing contained in this document shall be deemed to be, and this document does

not constitute of, or representation with respect to, any of the equipment covered. This

document is subject to change without notice and NEC Infrontia has no obligation to

provide updates or corrections to this document. Further, NEC Infrontia also reserves

the right, without prior notice, to make changes in equipment design or components as

it deems appropriate.

No representation is made that this document is complete or accurate in all respects

and NEC Infrontia shall not be liable for any errors or omissions. In no event shall

NEC Infrontia be liable for any incidental or consequential damages in connection

with the use of this document.

This document shall not provide the basis for any contract without the written

permission of the NEC Infrontia Corporation.

No part of this document may be photocopied or reproduced without prior written

permission of NEC Infrontia.

Contents

Making Internal Calls…………………………………………… 4

Making External Calls…………………………………………… 4

Answering Internal Calls………………………………………… 5

Answering External Calls……………………………………….. 5

Answering Doorphone Calls…………………………………….. 5

Holding an Internal Call…………………………………………. 6

Holding an External Call………………………………………… 6

Transferring a Call……………………………………………….. 7

Making a Paging Call…………………………………………….. 8

Callback…………………………………………………………… 8

Pick up…………………………………………………………….. 9

Missed Calls on Display Key telephones…………………………9

Call Forward……………………………………………………… 10

Call Redirect on Key telephones………………………………… 11

Do Not Disturb……………………………………………………. 11

Last Number Dial………………………………………………….12

Handsfree for Key telephones…………………………………….13

Volume Control for Key telephones…………………………….. 14

LCD Display Contrast for Display Key telephones……………. 14

Ring Tones for Key telephones………………………………….. 15

Programming One Touch keys on a Key telephone……………. 16

Service Code Table……………………………………………….. 17

Programming Function keys on a Key telephone………………. 18

Function Code Table………………………………………………19

Directory Dialling on the Super Display…………………………20

Directory Dialling on the Executive Display……………………. 21

General Information………………………………………………22

Making Internal Calls

You may contact another internal extension or a department group.

•

• Dial the extension number or department group number

• If there is no answer or it is busy, you may simply dial another

internal number without replacing the handset

• Pressing the digit 1will allow you to toggle between a ringing

and a voice call at the destination extension

Making External Calls

You may dial an external number via the keypad or access a stored

abbreviated number; the system will automatically seize an idle exchange

line for you.

•

• Dial 9followed by the external number or press the key and

enter the abbreviated dial code (e.g. 1)

On a single line telephone as there is no key, enter the code

813instead

Answering Internal Calls

An internal call may ring at your extension or come through as a voice

call (not available on single line telephone).

• If the call is ringing to answer

• Or if the call is voice announced you may talkback without lifting

the handset via the microphone (note the key lamp must be off)

Answering External Calls

An external call will usually ring at your extension and some caller

information may appear on your display.

• to answer

Answering Doorphone Calls

The system supports doorphones and it may be that your extension is

programmed to receive a doorphone call. On answering the call you are

also able to open the doorlock.

• to answer

• Whilst talking to the doorphone, to release the doorlock press the

key if you have a key telephone or press the Recall key if you

have a single line telephone

Holding an Internal Call

You may place another extension on hold and whilst they are held you

may process other calls.

Key telephone

• Press the key (you may replace the handset if you wish)

• To reconnect press the flashing key

Single line telephone

• Press the Recall key and remain

• To reconnect press the Recall key

Holding an External Call

An external call may be held in a number of ways depending on the

system set up. It may be appropriate for a caller to be placed on hold at

one extension and picked up from another. A held call which is not

picked up, automatically recalls to the extension that placed it on hold.

Single line telephone

• Press the Recall key to hold a call and remain

• To reconnect, press the Recall key

Key telephone

Common hold : the exchange line key (if programmed) flashes slowly

when it has been placed on common hold and any user with the flashing

line key can reconnect to the call (not available to single line telephones)

• Press the key and if you wish

• To reconnect press the slow flashing line key or the flashing

key

Key telephone and Single line telephone

Park Hold : the external caller is placed in a park position and any user

may retrieve the call from that park position using a code. Typically on a

key telephone specific park hold keys are set up to simplify the

procedure.

• Press the key on your key telephone or the Recall key on your

single line telephone

• Dial 831and the park position (01-32)

•

• To reconnect and dial 861and the park position (01-32)

Transferring a Call

You may transfer an internal or external call to another extension by

announcing the call or extending the call unannounced. If the transferred

call is not picked up, it automatically recalls to the extension making the

transfer.

Key telephone

• Press the key

• Dial the required extension number

• Announce the call and press key to transfer

• Or press the key and before answered – the call is

transferred and rings at the other extension

• Or if the extension is busy press key to camp the call on to that

extension

• Or to retrieve the call press the flashing green line key or key

Single line telephone

• Press the Recall key

• Dial the required extension number

• Announce the call and to transfer

• Or before answered – the call is transferred and rings at the

other extension

• Or if the extension is busy, press the Recall key to retrieve the call

Making a Paging Call

If you are unable to locate an individual, you may wish to make a paging

call which will broadcast over the loudspeakers of selected key

telephones (not available to single line telephones) and or an external PA

system. Extensions may be programmed into specific groups so that an

announcement is sent simultaneously to all key telephones in that group

(unless the extension is in use).

To page an internal group

•

• Dial 81and the paging group number

• Wait for the beeps and make the announcement

• Press #after the announcement and

To page over the external PA

•

• Dial 83and the paging group number

• Wait for the beeps and make the announcement

• Press #after the announcement and

Callback

If the extension you dial is busy or does not reply, you may set up a

callback so that you are alerted as soon as they become available or once

that extension is next used.

• Dial 85and listen for confirmation tone

• When you hear the recall tone alerting you that the extension is

available

•

If you wish to cancel a callback

•

• Dial 87and listen for confirmation tone

•

Pick Up

You may wish to intercept a call ringing at another extension, this is

referred to as pickup. You may enter a code to pickup a specific ringing

extension or you may be programmed into a pickup group and will pick

up calls just for your group.

• and dial

867for an extension within your pickup group or

715and the extension number for a specific extension

You will intercept and be connected to the call.

Missed Calls on display key telephones

By programming a function key as a Missed Calls key (refer to

programming function keys page 18), you will be able to check for any

external calls (on ISDN lines) that you have missed at your extension. If

you have missed calls the key will be flashing red, when you have

checked the calls the key will be steady red and when you have deleted

the list, the key will be unlit.

•

• Press the Missed Calls key

• Use the ∆or ∇keys to scroll through the list

• to dial the displayed number/name or press to delete

Call Forward

When you are away from your desk you may wish to redirect your calls

to another destination. There are different conditions under which you

can set a call forward, and one set up called tandem ring allows a user to

have two extensions that work as a single extension.

• and dial the call forwarding code as follows

842for dual ring – calls ring at your own and the destination

extension but not if your phone is busy

843for busy transfer – calls only forward when your phone is

busy

844for tandem ring – calls to either extension will ring both

extensions or if either is busy, busy tone shall be heard by the

caller.

845for unanswered call transfer – calls only forward on no

reply at your phone

848for call forward – all calls forward immediately to the

destination extension

• To set the call forward dial 1and enter the destination extension

number

Or to cancel dial 0

•

It is possible if the system is programmed, to allow the call forward

condition to be transferred to an external number. The external number

must be stored as a common abbreviated dial.

To set external call forward

•

• Dial the all call forward code 848and 1to set

• Dial 813(access code for abbreviated dial) and the target

abdial code

•

To cancel external call forward

•

• Dial 848and 0to cancel

•

Autres manuels pour DDXXEE SSeerriieess

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NEC Téléphone

NEC

NEC Dterm Series i Manuel utilisateur

NEC

NEC Xen Topaz Manuel utilisateur

NEC

NEC XN120 Vision Manuel utilisateur

NEC

NEC Univerge DT820 Manuel utilisateur

NEC

NEC Univerge SV8100 Manuel utilisateur

NEC

NEC Dterm PSIII Manuel utilisateur

NEC

NEC Univerge SV9100 Manuel utilisateur

NEC

NEC AT-50 Manuel utilisateur

NEC

NEC ELITE IPK II Mode d’emploi

NEC

NEC Aspire Manuel utilisateur

NEC

NEC SV 8100 Manuel utilisateur

NEC

NEC DS1000 Manuel utilisateur

NEC

NEC DS2000 IntraMail Manuel utilisateur

NEC

NEC SL1100 Manuel utilisateur

NEC

NEC Portrait 308 Manuel utilisateur

NEC

NEC DTR-1HM-1 Manuel utilisateur

NEC

NEC DS1000 Manuel utilisateur

NEC

NEC i-Series Manuel utilisateur

NEC

NEC Univerge SV9100 Manuel utilisateur

NEC

NEC DT700 Series Manuel utilisateur

NEC

NEC DT330 Manuel utilisateur

NEC

NEC DT730 Manuel d'instructions

NEC

NEC Aspire Manuel utilisateur

NEC

NEC IPK II Manuel utilisateur

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur

Ericsson

Ericsson Dialog 3213 Manuel utilisateur