Nautel NX300 Manuel utilisateur

NX300 Transmitter

Installation Manual

Document:NHB-NX300-INS-3.0

Issue: 3.0 2012-11-01

Status: Standard

Nautel Limited

10089 Peggy’s Cove Road

Hackett’s Cove, NS Canada B3Z 3J4

Phone: +1.902.823.3900 or

Toll Free: +1.877.6NAUTEL (6628835) (Canada & USA only)

Fax: +1.902.823.3183

Nautel Inc.

201 Target Industrial Circle

Bangor, Maine USA 04401

Phone: +1.207.947.8200

Fax: +1.207.947.3693

Customer Service (24 hour support)

+1.877.628.8353 (Canada & USA only)

+1.902.823.5100 (International)

Email: [email protected]

Web: www.nautel.com

The comparisons and other information provided in this document

have been prepared in good faith based on publicly available

information. The reader is encouraged to consult the respective

manufacturer's most recent published data for verification.

NX300 Installation Manual Table of contents

Page v

Contents

Release control record vii

Preparing for installation 1-1

Unpacking and positioning 2-1

Completing cabinet assembly 3-1

Connecting transformer taps/load wiring 4-1

Connecting the station reference ground 5-1

Connecting ac power 6-1

Adjusting the spark gap 7-1

Installing audio inputs 8-1

Planning complete? 8-1

Routing cables 8-1

Setting Exgine audio parameters 8-4

Installing control/monitor wiring 9-1

PLanning complete? 9-1

Routing cables 9-1

Commissioning tasks 10-1

Pre-commissioning tasks 10-1

Commissioning 10-2

NX300 Installation Manual Table of contents

Page vi Issue 3.0 2012-11-01

Going on-air 10-4

Parts and tools 11-1

Contacting Nautel 11-1

Parts supplied by Nautel 11-1

Parts not supplied by Nautel 11-2

Parts ordering 11-2

Module replacement program 11-2

Tools for installation 11-3

Pre-installation / Installation assistance 12-1

Pre-installation consulting 12-1

Installation and commissioning service 12-1

Online documentation 12-3

On-site support 12-3

Training 12-3

Standard warranty 12-4

Extended warranties 12-7

List of terms 13-1

NX300 Installation Manual

Issue 3.0 2012-11-01 Page vii

Release control record

Issue Date Reason

3.0 2012-11-01 Release 3 of product (NARA54B)

NX300 Installation Manual

Page viii Issue 3.0 2012-11-01

NX300 Installation Manual Preparing for installation

Issue 3.0 2012-11-01 Page 1-1

Section 1: Preparing for installation

Before installing your NX300 transmitter, perform the following steps:

1. Ensure that you have performed the pre-installation tasks described in the

NX300 Pre-installation Manual.

2. Make sure that you received all the components. (Check your packing list.)

3. Inspect all crates and packages for damage.

4. Report any damage immediately to your Nautel sales representative and the carrier.

5. Move the crates as close as possible to the transmitter’s planned location.

6. Unpack the crates in accordance with the instructions provided on the outside of the crates.

• For each crate, remove the panel labelled open this side. The panel is attached using

Philips head screws.

• Remove any visible packing material, including braces, from the crate's interior.

7. Review any assembly notes or instructions contained inside the transmitter crates. (For sites

requiring custom configurations, the instructions provided with the transmitter replace the

instructions provided here.)

8. Assemble your parts and tools.

For a list of required tools, see “Parts and tools” on page 11-1.

9. When you are ready to install the NX300 transmitter, follow the steps shown in Figure 1.1

on page 1-2.

TIP When you have completed a task or step, put a check mark beside the step

number.

CAUTION:

FAILURE TO COMPLY WITH RECOMMENDATIONS MAY VOID YOUR MANUFACTURER’S

WARRANTY. FOR MORE INFORMATION, REVIEW YOUR WARRANTY DOCUMENTS.

NX300 Installation Manual Preparing for installation

Page 1-2 Issue 3.0 2012-11-01

Figure 1.1: Flowchart - Installing the transmitter

Unpacking and positioning - see page 2-1

Connecting the station reference ground - see page 5-1

Connecting transformer taps/load wiring - see page 4-1

Installing control/monitor wiring - see page 9-1

Commissioning tasks - see page 10-1

Perform operational tasks:

“Commissioning”, “Modulation checks” and “Going on-air”, beginning on page 10-2

Connecting ac power - see page 6-1

Installing audio inputs - see page 8-1

Adjusting the spark gap - see page 7-1

Completing cabinet assembly - see page 3-1

Autres manuels pour NX300

Table des matières

Autres manuels Nautel Émetteur

Nautel

Nautel VS300 Manuel utilisateur

Nautel

Nautel VS2.5 Manuel de programmation

Nautel

Nautel XR12 Manuel utilisateur

Nautel

Nautel XL12 Manuel du propriétaire

Nautel

Nautel VX150 Manuel utilisateur

Nautel

Nautel FM10 Manuel du propriétaire

Nautel

Nautel NV10LT Manuel utilisateur

Nautel

Nautel NX100 Manuel de programmation

Nautel

Nautel NX50 Manuel utilisateur

Nautel

Nautel NX5 Manuel utilisateur

Nautel

Nautel VS300 Manuel de programmation

Nautel

Nautel VS300 Manuel utilisateur

Nautel

Nautel NX5 Manuel

Nautel

Nautel GV20 Manuel utilisateur

Nautel

Nautel XR6 Manuel utilisateur

Nautel

Nautel GV30N Manuel de programmation

Nautel

Nautel NV Series Manuel technique

Nautel

Nautel VS1 Manuel utilisateur

Nautel

Nautel XR3 Manuel utilisateur

Nautel

Nautel FM10011 Manuel utilisateur

Nautel

Nautel ND2000A-02x-xx0 Series Manuel du propriétaire

Nautel

Nautel GV60 Manuel de programmation

Nautel

Nautel J1000 Mode d'emploi

Nautel

Nautel NV5LT Manuel de programmation

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur