MSI MS-6395 Manuel utilisateur

Version 5.0

G52-MA00451

MS-6395 Micro-ATX Mainboard

MSI

MICRO-STAR INTERNATIONAL

Manual Rev: 5.0

Release Date: October 2001

FCC-BRadioFrequencyInterferenceStatement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU

RESEAU.

Micro-StarInternational MS-6395

Testedtocomply

withFCCStandard

ForHome orOfficeUse

iii

Edition

October 2001

The material in this document is the intellectual property of MICRO-

STAR INTERNATIONAL. We take every care in the preparation

of this document, but no guarantee is given as to the correctness of its

contents. Our products are under continual improvement and we re-

serve the right to make changes without notice.

Trademarks

All trademarks used in this manual are the property of their respective

owners.

AMD, Athlon and Duron are registered trademarks of AMD Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 98/2000/ME and Windows NT are registered trademarks of

Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

Revision History

Revision RevisionHistory Date

5.0 First release for PCB 5.X October 2001

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the

equipmentfrom overheating. DONOT COVERTHEOPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

8. AlwaysUnplug the PowerCord before insertinganyadd-on card ormodule.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening that could damage or cause electri-

cal shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

zThe power cord or plug is damaged

zLiquid has penetrated into the equipment

zThe equipment has been exposed to moisture

zThe equipment has not work well or you can not get it work according

to User’s Manual.

zThe equipment has dropped and damaged

zIf the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED,STORAGETEMPERATUREABOVE600C(1400F),IT

MAYDAMAGETHEEQUIPMENT.

Safety Instructions

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer.

Contents

Chapter 1. Introduction ...............................................................1-1

MainboardSpecification ............................................................1-2

MainboardLayout .....................................................................1-4

Quick Components Guide .........................................................1-5

Key Features ............................................................................1-6

MSI Special Features................................................................1-7

PC Alert™ III .......................................................................1-7

T.O.P Tech™ III (Optional)...................................................1-9

Chapter 2. Hardware Setup ........................................................2-1

Central Processing Unit: CPU ...................................................2-2

CPU Installation Procedures ...............................................2-2

CPUCore SpeedDerivation Procedure................................2-3

Memory ....................................................................................2-4

Introduction to SDRAM .......................................................2-4

DIMM Modules Combination ...............................................2-5

Installing DIMM Modules .....................................................2-5

Power Supply............................................................................2-6

ATX 20-Pin Power Supply....................................................2-6

Back Panel ...............................................................................2-7

MouseConnector................................................................2-7

KeyboardConnector ...........................................................2-8

USB Connectors .................................................................2-8

Parallel Port Connector .......................................................2-9

Serial Port Connectors: COM A & COM B ........................2-10

VGA DB 15-Pin Connector................................................2-10

Joystick/Midi Connectors .................................................. 2-11

Audio Port Connectors ...................................................... 2-11

LAN Jack (RJ-45) (Optional) .............................................. 2-11

Connectors .............................................................................2-12

Floppy Disk Drive Connector: FDD1 ..................................2-12

Hard Disk Connectors: IDE1 & IDE2 .................................2-13

Case Connectors: JFP1 & JFP2 (Intel Spec Optional).......2-14

Wake On LAN Connector: JWOL1 ....................................2-16

Wake On Ring Connector: JMDM1 ...................................2-16

IrDAInfraredModuleConnectors:JIR1&J13(IntelSpecOptional)

.........................................................................................2-17

Chassis Intrusion Switch Connector: J1 ............................2-18

Power Saving Switch Connector: JGS1 .............................2-18

CD-In/AuxLine-In/Modem-InConnector:J4/J6/J7 ..............2-19

Fan Power Connectors: CFAN1/SFAN1/PFAN1 ................2-20

USB Front Panel Connectors: USB2 & USB3 (Intel Spec

Optional) ...........................................................................2-21

Front Panel Audio Connectors: J10 & JAUDIO1 (Intel Spec

Optional) ...........................................................................2-22

Power Saving LED Connector: JGLED1 ............................2-24

Power Switch Connector: PWRSW1.................................2-25

Jumpers ..................................................................................2-26

Clear CMOS Jumper: JBAT1 .............................................2-26

LAN Enable/Disable Jumpers: JLAN1 & JLAN2 (Optional). 2-27

BIOS Flash Jumper: JP1...................................................2-27

Onboard Audio Codec Jumper: JP2...................................2-28

Slots .......................................................................................2-29

PCI Slots ..........................................................................2-29

CNR (Communication Network Riser) Slot ........................2-29

ISA Slot (Optional) ............................................................2-29

PCI Interrupt Request Routing ...........................................2-30

Chapter 3. AWARD® BIOS Setup................................................3-1

Entering Setup ..........................................................................3-2

Control Keys .............................................................................3-2

vii

Getting Help..............................................................................3-3

The Main Menu .........................................................................3-4

Standard CMOS Features .........................................................3-6

AdvancedBIOSFeatures ..........................................................3-9

Advanced Chipset Features ....................................................3-13

IntegratedPeripherals .............................................................3-17

Power Management Setup ......................................................3-22

PnP/PCIConfigurations...........................................................3-26

PC Health Status ....................................................................3-28

Frequency/Voltage Control ......................................................3-30

Load Fail-Safe/Optimized Defaults ..........................................3-32

Set Supervisor/User Password ................................................3-34

Save & Exit Setup...................................................................3-36

Exit Without Saving.................................................................3-37

Glossary............................................................................................ I

Introduction

1-1

Chapter 1.

Introduction

Thank you for purchasing the MS-6395 (v5.X) Micro-ATX

motherboard. The mainboard, based on Intel®810E & 82801BA (ICH2)

chipsets, is a high-performance computer mainboard designed for Intel®

Celeron/Celeron (0.13 process)/Pentium®III (Tualatin) processor in the 370

pin package that provides a high-end and professional desktop platform

solution.

This chapter includes the following topics:

Mainboard Specification 1-2

Mainboard Layout 1-4

Quick Components Guide 1-5

Key Features 1-6

MSI Special Features 1-7

Chapter 1

1-2

CPU

●

Supports Socket 370 for Intel®Celeron™/Celeron™ (0.13 process)/

Pentium III (Tualatin)

●

Supports900MHz,1.0GHz,1.1GHz,1.2GHz,1.4GHzorhigher

Chipset

●

Intel®810E(GMCH)chipset (421 BGA)

- Integrated Graphics Controller

- Intel DDM+ Architecture

- SDRAM memory Independent of System Bus

●

Intel®ICH2 chipset (241 BGA)

- AC’97 Controller Integrated

- 2 full IDE channels, up to ATA100

- Low pin count interface for SIO

- Supports 4 x USB

Front Side Bus (FSB)

●

100/133MHz clocks are supported.

MainMemory

●

Supports two 168-pin DIMM sockets

●

Supports a maximum memory size of 512MB SDRAM

Slots

●

One CNR (Communication and Network Riser) slot

●

Three 32-bit Master PCI Bus slots

●

Supports 3.3v/5v PCI bus Interface

●

One 16-bit ISA bus slot (optional)

On-BoardIDE

●

An IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with

PIO, Bus Master and Ultra DMA/100 operation modes

●

Can connect up to four IDE devices

Mainboard Specification

Introduction

1-3

On-BoardPeripherals

●

On-Board Peripherals include:

- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes

- 2 serial ports (COMA + COMB pin header)

- 1 parallel port supports SPP/EPP/ECP mode

- 4 USB ports (2 Rear connectors + USB Front Pin Header)

- 1 IrDA connector for SIR

- 1 VGA port

- 1 Audio/Game port

Video

●

GMCH chip integrated

●

2D/3D Graphics

●

Onboard 4MB Display Cache (optional)

Audio

●

AC97 SW Codec

●

ICH2 chip integrated

LAN(Optional)

●

ICH2 + Intel 82562 (Optional)

BIOS

●

The mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

●

The mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications

Dimension

●

Micro ATX Form Factor: 24cm x 20cm

Mounting

●

6 mounting holes

Table des matières

Autres manuels MSI Carte mère

MSI

MSI 975X Platinum Series Manuel utilisateur

MSI

MSI MS-6309 Manuel

MSI

MSI H55M-ED55 Series Manuel utilisateur

MSI

MSI E7505 Master-LS2 Manuel utilisateur

MSI

MSI Z270-A PRO Manuel utilisateur

MSI

MSI MAG X570 TOMAHAWK WIFI Manuel utilisateur

MSI

MSI Z97M GAMING Manuel utilisateur

MSI

MSI A320M gaming pro Manuel utilisateur

MSI

MSI PRO A620M-B Manuel utilisateur

MSI

MSI 945PL Neo Series Manuel utilisateur

MSI

MSI G52-75221X5 Manuel utilisateur

MSI

MSI PRO B660M-A CEC WIFI Manuel utilisateur

MSI

MSI MS-6161 Manuel utilisateur

MSI

MSI 694 MASTER Manuel utilisateur

MSI

MSI A520M PRO-VDH Manuel utilisateur

MSI

MSI Z77A Manuel utilisateur

MSI

MSI MS-6526 Manuel

MSI

MSI 649 Neo-V Manuel utilisateur

MSI

MSI B450I GAMING PLUS AC Manuel utilisateur

MSI

MSI B450 GAMING PRO CARBON AC Manuel utilisateur

MSI

MSI MAG B660 TOMAHAWK WIFI DDR4 Manuel utilisateur

MSI

MSI MS-7226 (V1.X) Manuel utilisateur

MSI

MSI MPG B760I EDGE WIFI DDR4 Manuel utilisateur

MSI

MSI NF725-C35 Series Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur