MSI MS-6319 Manuel utilisateur

CHAPTER 1 INTRODUCTION

1-1

Chapter 1

INTRODUCTION

The MS-6319 ATX CA10 mainboard is a high-performance computer

mainboard based on Intel®820 chipset. The MS-6319 is designed for the

Intel®PentiumTM III(FC-PGA) processor for high-end business/personal

desktop markets.

The Intel®820 chipset is the first generation chipset for the Intel®Pentium®

III processor. An integrated centralized memory arbiter allocates memory

bandwidth to multiple system agents to optimize system memory utilization.

A new chipset component interconnect, the hub interface, is designed into

the Intel 820 chipset to provide an efficient communication channel between

the memory controller hub and I/O controller hub.

The Intel 820 chipset contains four core components: the Memory Control-

ler Hub (MCH), the I/O Controller Hub (ICH), the Memory Translator Hub

(MTH), and the Firmware Hub (FWH). The MCH integrates a 100MHz/

133MHzCPUFSB,whilethe MTHintegratesa100MHzSDRAMcontroller

and high-speed hub interface for communication with the ICH. The ICH

integratesan Ultra ATA33/66(ICH)controller,USBhostcontroller,LPC

interfacecontroller,FWHintefaceconroller,PCIinterfacecontroller,AC’97

digital controller and a hub interface for communication with the MCH.

The Intel®82802 Firmware Hub (FWH) component is part of the Intel®820

chipset. The FWH is key to enabling future security and manageability

infrastructure for the PC platform.

CHAPTER 1 INTRODUCTION

1-2

1.1 Mainboard Features

CPU

lSupport Socket 370 for Intel®Pentium III(FC-PGA) processor.

lSupport550/600/650/667/700/733/800/866MHzorhigherprocessor

Chipset

lIntel®820Caminochipset.(324BGA)

-AGP4x/2xuniversalslot

-Support100/133MHzFSB

lIntel®ICHchipset.(241BGA)

- AC’97 Controller Integrated

- 2 full IDE channels, up to ATA66

- Low pin count interface for SIO

lIntel®MTHchipset.(241BGA)

ClockGenerator

l100/133MHz clocks are supported.

MainMemory

lSupports three 168-pin DIMM sockets.

lSupportsa maximumSDRAMmemorysize of512MBor 1GB(32Mx4)

registered DIMM only.

Slots

lOne AMR (Audio Modem Riser)

lOne AGP (Accelerated Graphics Port) slot.

- AGP specification compliant

- AGP66/133/266MHzdevice support

lFive 32-bit Master PCI Bus slots and one 16-bit ISA slot(Optional)

- wherein one PCI/ISA slot is shared.

lSupports 3.3v/5v PCI bus Interface.

CHAPTER 1 INTRODUCTION

1-3

On-BoardIDE

lAn IDE controller on the ICH chipset provides IDE HDD/CD-ROM with

PIO, Bus Master and Ultra DMA33/66 operation modes.

lCan connect up to four IDE devices.

On-BoardPeripherals

lOn-BoardPeripherals include:

- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

-2serialport(COMA + 1 COMB)

- 1 parallel port supports SPP/EPP/ECP mode

- 2 USB ports

- 1 IrDA connector for SIR.

-1 Game Port

-1 Audio Port (Line-In, Line-Out, Mic-In)

Audio

lICH chip integrated

lAC’972.1 Compliant

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications.

lCPU Voltage setting through BIOS

lFWH Flash BIOS Protect

Dimension

lATX FormFactor: 30.5cmx21.7cm

Mounting

l7 mounting holes.

CHAPTER 1 INTRODUCTION

1-4

1.2 Mainboard Layout

PCI SLOT 3

PCI SLOT 2

PCI SLOT 1

ATX

Power Supply

Intel

820

chipset

DIMM 2(shared)

Top: mouse

Bottom:

keyboard

Top:

USBPort

DIMM 1

IDE2

Bottom:

USBPorts

IDE1 FDD

ICH

JFP1

JGS1

CD_IN

AUX_IN

PSFAN

BATT

Top: LPT

Bottom:

COMA

COMB

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

MS-6319ATXCA10Mainboard

MODEM_IN

CPUFAN

JVSB1

AMR

AGP Slot 1

JBAT1

SW2

JMDM1

DIMM 3(shared)

PCI SLOT 4

PCI SLOT 5

ISA SLOT 1

SYSFAN

JP4 FWH

JRMS1

J7 JGL1

JP2 J6

J13

JP3

JWOL1

JSTR

MTH

Socket 370

JP7

JP1

CHAPTER 2 HARDWARE INSTALLATION

2-1

CPU

Chapter 2

HARDWARE INSTALLATION

2.1 Central Processing Unit: CPU

Themainboardoperates with Intel®PentiumIIICoppermineprocessor. The

mainboard uses a CPU socket called Socket 370 for easy CPU installation.

The CPU should always have a Heat Sink and a cooling fan attached to

prevent overheating.

3. Press the lever down to

complete the installation.

2. Locate Pin 1 in the socket

and look for the white dot or

cut edge in the CPU. Match

Pin 1 with the white dot/cut

edge. Then, insert the CPU.

It should insert easily.

OpenLever

Pin1

Sliding

Plate

White dot/

Cut edge

Lever

1. Pull the lever sideways away

from the socket. Then, raise

the lever up to a 90-degree

angle.

Pin1

2.1-1 CPU Installation Procedures

CHAPTER 2 HARDWARE INSTALLATION

2-2

The BIOS can be used to set the CPU Host Bus Frequency Clock.

If CPUClock = 100MHz

Core/Bus ratio = 4

then CPU core speed = Host Clockx Core/Bus ratio

= 100MHzx 4

= 400MHz

2.1-2 CPU Core Speed Derivation Procedure

CHAPTER 2 HARDWARE INSTALLATION

2-3

SW2

SW2 Function

Automatically detect Intel CPU

Bus Frequency

Automatically detect Cyrix

CPU Bus Frequency

13 2 1

Short

Allows CPU overclocking.

Set 100MHz to 133MHz

Short

Open

2.1-3 Overclocking Jumper: SW2

Overclocking is operating a CPU/Processor beyond its specified

frequency. SW2 jumper is used for overclocking.

Note: Intel Celeron Processor are basically a 66MHz FSB processor.

Using Intel Celeron Processor on this mainboard will auto-

maticallychangethe66MHzFSBinto100MHzFSB. However,

not all Intel Celeron processor will run properly on this

mainboard.

CHAPTER 2 HARDWARE INSTALLATION

2-4

2.1-4 Processor Selector Jumper: JP7

This jumper must be short to support different kind of processor.

JP7

JP7 Function

For Coppermine Proces-

sor or 1GHz Processor

For Cyrix or Celeron

Processor

Short

Open

Note: Intel Celeron Processor are basically a 66MHz FSB processor.

Using Intel Celeron Processor on this mainboard will auto-

maticallychangethe66MHzFSBinto100MHzFSB. However,

not all Intel Celeron processor will run properly on this

mainboard.

CHAPTER 2 HARDWARE INSTALLATION

2-5

2.1-5 CPU Core/Bus Ratio strap to Safe Mode: JP3

This jumper is used to adjust the CPU core/ratio to safe mode.

JP3

JP3 Function

Short

Open

Safe Mode

(Core/Bus Ratio by 2)

Core/Bus Ratio in ICH

Warning: If CPU Core/Bus ratio is set too high, the system may

hang. Short pin JP3, then restart the system until boot up.

The CPU core/bus ratio will then be set to the default

setting of 2. Properly shutdown the system, and remove

the short on JP3.

CHAPTER 2 HARDWARE INSTALLATION

2-6

2.1-6 Fan Power Connectors: PSFAN/CPUFAN/SYSFAN

These connectors support system cooling fan with + 12V. It supports

three pin head connector. When connecting the wire to the connector,

always take note that the red wire is the positive and should be con-

nected to the +12V, the black wire is Ground and should be connected to

GND. If your mainboard has System Hardware Monitor chipset on-

board, you must use a specially designed fan with speed sensor to take

advantage of this function.

For fans with fan speed sensor, every rotation of the fan will send out 2

pulses. System Hardware Monitor will count and report the fan rotation

speed.

Note: 1. Always consult vendor for proper CPU cooling fan.

2. CPU FAN supports the FAN control. You can install PC Alert

utility. This will automatically control the CPU FAN Speed according

to the actual CPU temperature.

CPUFAN

PSFAN: PowerSupply Fan

CPUFAN:Processor Fan

SYSFAN: System Fan

+12V

GND

SENSOR

SYSFAN

+12V

GND

SENSOR

PSFAN

+12V

GND

SENSOR

Table des matières

Autres manuels MSI Carte mère

MSI

MSI MEG X570 GODLIKE Manuel utilisateur

MSI

MSI G31M Series Manuel utilisateur

MSI

MSI PRO B760-VC WIFI Manuel utilisateur

MSI

MSI KT4 Ultra Manuel utilisateur

MSI

MSI MPG GAMING PLUS Z390 Manuel utilisateur

MSI

MSI MS-9896 Manuel utilisateur

MSI

MSI MEG X570S ACE MAX Manuel utilisateur

MSI

MSI Z68A-G43 series Manuel utilisateur

MSI

MSI MAG B460M BAZOOKA Manuel utilisateur

MSI

MSI 650GLMD Manuel utilisateur

MSI

MSI PRO B760-P WIFI Manuel utilisateur

MSI

MSI 945G Neo Manuel utilisateur

MSI

MSI Eclipse PLUS - Motherboard - ATX Guide de sécurité

MSI

MSI 915GM Speedster MS-9625 Manuel utilisateur

MSI

MSI MEG Z590 GODLIKE Manuel utilisateur

MSI

MSI MS-98D7 Manuel utilisateur

MSI

MSI MS-6558/G Manuel utilisateur

MSI

MSI MEG Z390 GODLIKE Manuel utilisateur

MSI

MSI MS-7320 Manuel utilisateur

MSI

MSI P965 Neo Series Manuel utilisateur

MSI

MSI PRO Series Manuel utilisateur

MSI

MSI MS-7345 Manuel utilisateur

MSI

MSI A75MA-G55 Series Manuel utilisateur

MSI

MSI MAG Z590 TOMAHAWK WIFI Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur