MSI MS-6318 Manuel utilisateur

Version 5.0

G52-MA00462

MS-6318 (v5.X) Micro ATX Mainboard

MSI

MICRO-STAR INTERNATIONAL

Manual Rev: 5.0

Release Date: Oct. 2001

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU

RESEAU.

Micro-Star International MS-6318

Tested to comply

with FCC Standard

For Home or Office Use

iii

Edition

Oct. 2001

The material in this document is the intellectual property of MICRO-

STAR INTERNATIONAL. We take every care in the preparation

of this document, but no guarantee is given as to the correctness of its

contents. Our products are under continual improvement and we re-

serve the right to make changes without notice.

Trademarks

All trademarks used in this manual are the property of their respective

owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

Revision History

Revision Revision History Date

V5.0 First release for PCB 5.X Oct. 2001

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening that could damage or cause electri-

cal shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

zThe power cord or plug is damaged

zLiquid has penetrated into the equipment

zThe equipment has been exposed to moisture

zThe equipment has not work well or you can not get it work according

to User’s Manual.

zThe equipment has dropped and damaged

zIf the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED,STORAGETEMPERATUREABOVE600

C(1400F),IT

MAY DAMAGE THE EQUIPMENT.

Safety Instructions

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer.

CONTENTS

Chapter 1. Introduction ............................................................... 1-1

Mainboard Specification ............................................................ 1-2

Mainboard Layout ..................................................................... 1-4

Quick Components Guide ......................................................... 1-5

Key Features ............................................................................ 1-6

Chapter 2. Hardware Setup ........................................................ 2-1

Central Processing Unit: CPU ................................................... 2-2

CPU Installation Procedures ............................................... 2-2

CPU Core Speed Derivation Procedure ................................ 2-3

Memory Installation ................................................................... 2-4

Memory Bank Configuration ................................................ 2-4

Memory Installation Procedures .......................................... 2-5

Power Supply ............................................................................ 2-6

ATX 20-Pin Power Connector: JWR1 ................................... 2-6

Back Panel ............................................................................... 2-7

Mouse Connector: JKBMS1 ................................................ 2-7

Keyboard Connector: JKBMS1 ............................................ 2-8

USB Connectors ................................................................. 2-8

Serial Port Connector: COM A & COM B ............................ 2-9

Joystick/Midi Connectors .................................................... 2-9

Audio Port Connectors ........................................................ 2-9

Parallel Port Connector: LPT1 ........................................... 2-10

Connectors ............................................................................. 2-11

Floppy Disk Drive Connector: FDD1 .................................. 2-11

Hard Disk Connectors: IDE1 & IDE2 ................................. 2-12

Fan Power Connectors: CPUFAN/SYSFAN ....................... 2-13

CD-In Connector: JCD1 ..................................................... 2-14

Aux Line-In Connector: JAUX1 .......................................... 2-14

Modem-In Connector: JPHONE ......................................... 2-14

Wake On LAN Connector: JWOL1 .................................... 2-15

Wake On Ring Connector: JMDM1 ................................... 2-15

Front Panel Connector: JFP1 or JFP2 ............................... 2-16

Front Audio Header: JAUDIO1 ........................................... 2-17

Front USB Connector: USB1 or USB3 .............................. 2-18

IrDA Infrared Module Header: IR2 ...................................... 2-19

Power Saving LED Connector: JGL1 ................................. 2-20

Jumpers .................................................................................. 2-21

Clear CMOS Jumper: JBAT1 ............................................. 2-21

USB KB/MS Wake-Up Jumpers: JUSBV1 & JUSBV2 ....... 2-22

PS2 KB/MS Power Jumper: JKBV1 .................................. 2-23

Slots ....................................................................................... 2-24

AGP (Accelerated Graphics Port) Slot .............................. 2-24

PCI (Peripheral Component Interconnect) Slots ................. 2-24

ISA (Industry Standard Architecture) Slot (optional) ......... 2-24

PCI Interrupt Request Routing ........................................... 2-25

Chapter 3. AWARD® BIOS Setup .................................................. 3-1

Entering Setup .......................................................................... 3-2

Control Keys ............................................................................. 3-2

Getting Help .............................................................................. 3-3

The Main Menu ......................................................................... 3-4

Standard CMOS Features ......................................................... 3-6

Advanced BIOS Features .......................................................... 3-8

Advanced Chipset Features .................................................... 3-12

Integrated Peripherals ............................................................. 3-16

Power Management Setup ...................................................... 3-19

PNP/PCI Configurations .......................................................... 3-24

Load Fail-Safe/Optimized Defaults .......................................... 3-26

Set Supervisor/User Password ................................................ 3-28

vii

Save & Exit Setup ................................................................... 3-30

Exit Without Saving ................................................................. 3-31

Appendix: Glossary ..................................................................... A-1

Introduction

1-1

Chapter 1.

Introduction 1

Mainboard Specification 1-2

Mainboard Layout 1-4

Quick Components Guide 1-5

Key Features 1-6

Thank you for purchasing the MS-6318 v5.X Micro ATX mainboard. The

MS-6318 is a superior computer mainboard based on VIA®Apollo Pro133T

chipset for optimal system efficiency. Designed to fit the advanced Intel®

Pentium®III/Celeron™/Coppermine™/Tualatin™, and VIA®C3™ processors,

the MS-6318 delivers a high performance and professional desktop platform

solution.

This chapter includes the following topics:

Chapter 1

1-2

CPU

zSupports Socket 370 for Intel®Pentium®III/Celeron™/Coppermine™/

Tualatin™, and VIA®C3™ processors.

zSupports 600MHz ~ 1.2 GHz CPU.

Chipset

zVIA®694T chipset (520 BGA)

- Supports 66/100/133MHz FSB.

- AGP 4x and PCI plus Advanced ECC Memory Controller.

- Supports PC100/133 SDRAM, VCM & ESDRAM technology.

zVIA®VT82C686B chipset (352 BGA)

- Enhanced Power Management Features.

- Integrated Super I/O (FDC, LPT, COM 1/2, and IR).

- DirectSound AC97 Audio.

- Integrated hardware Soundblaster.

- Dual bus Master IDE Ultra DMA33/66/100.

- ACPI.

Main Memory

zSupport two 168-pin DIMM sockets.

zSupport a maximum memory size of 256MB(64-bit) or 512MB(128-bit)

SDRAM.

Slots

zOne AGP (Accelerated Graphics Port) slot.

zThree PCI 2.2 32-bit PCI bus slots (support 3.3v/5v PCI bus interface)

zOne 16-bit ISA bus slot (optional).

On-Board IDE

zAn IDE controller on the VIA®VT82C686B chipset provides IDE HDD/CD-

ROM with PIO, Bus Master and Ultra DMA 33/66/100 operation modes.

zCan connect up to four IDE devices.

On-Board Peripherals

zOn-Board Peripherals include:

- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and

Mainboard Specification

Introduction

1-3

2.88Mbytes.

- 2 serial ports (COM A + COM B).

- 1 parallel port supports SPP/EPP/ECP mode.

- 4 USB ports (Rear * 2/ Front * 2).

- 1 audio/game port.

Audio

zDirectSound AC97 audio integrated.

zSigmatel 9708T software audio (optional).

zCreative CT5880 hardware audio (optional).

BIOS

zThe mainboard BIOS provides “Plug & Play” BIOS which detects the pe-

ripheral devices and expansion cards of the board automatically.

zThe mainboard provides a Desktop Management Interface (DMI) function

which records your mainboard specifications.

Dimension

zMicro ATX Form Factor: 24.3cm x 21.0cm.

Mounting

z6 mounting holes.

Table des matières

Autres manuels MSI Carte mère

MSI

MSI MPG B550 GAMING PLUS Manuel utilisateur

MSI

MSI B460M PRO-VDH WIFI Manuel utilisateur

MSI

MSI 645 Ultra Manuel utilisateur

MSI

MSI MS-5192 Manuel utilisateur

MSI

MSI H170M-A PRO Manuel utilisateur

MSI

MSI 945PL Neo5 Series Manuel utilisateur

MSI

MSI X299 TOMAHAWK ARCTIC Manuel utilisateur

MSI

MSI B350 KRAIT GAMING Manuel utilisateur

MSI

MSI GAMING PLUS MPG Z590 Manuel utilisateur

MSI

MSI K7N415 Pro Manuel utilisateur

MSI

MSI MPG B560I Manuel utilisateur

MSI

MSI 694 MASTER Manuel utilisateur

MSI

MSI Z170A KRAIT GAMING Manuel utilisateur

MSI

MSI 845 Pro2-C Manuel utilisateur

MSI

MSI MS-98J4 Manuel utilisateur

MSI

MSI B75MA-P45 series Manuel utilisateur

MSI

MSI MS-6391 Manuel utilisateur

MSI

MSI XPower Series Manuel utilisateur

MSI

MSI P45 Neo3 Manuel utilisateur

MSI

MSI PRO B760-VC WIFI Manuel utilisateur

MSI

MSI MEG X570 UNIFY Manuel utilisateur

MSI

MSI 760GA-P43 FX Manuel utilisateur

MSI

MSI Z370-A PRO Manuel utilisateur

MSI

MSI 880GMA-E45 series Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur