MSI MS-6301 Manuel utilisateur

CHAPTER 1 INTRODUCTION

1-1

The MS-6301 ATX CA8 mainboard is a high-performance computer

mainboard based on Intel®820 chipset. The MS-6301 is designed for the

Intel®PentiumTM II/III processor for high-end business/personal desktop

markets.

The Intel®820 chipset is the first generation chipset for the Intel®Pentium®

II/III processor. An integrated centralized memory arbiter allocates memory

bandwidth to multiple system agents to optimize system memory utilization.

A new chipset component interconnect, the hub interface, is designed into

the Intel 820 chipset to provide an efficient communication channel between

the memory controller hub and I/O controller hub.

The Intel 820 chipset contains four core components: the Memory Control-

ler Hub (MCH), Memory Translator Hub (MTH), the I/O Controller Hub

(ICH) and the Firmware Hub (FWH). The MCH integrates a 100MHz/

133MHzCPUFSB,andafix100MHzSDRAMcontrollerandhigh-speedhub

interface for communication with the ICH. The ICH integrates an Ultra ATA/

66(ICH)controller, USBhostcontroller, LPC interface controller,FWH

inteface conroller, PCI interface controller, AC’97 digital controller and a hub

interface for communication with the MCH.

The Intel®82802 Firmware Hub (FWH) component is part of the Intel®820

chipset. The FWH is key to enabling future security and manageability

infrastructure for the PC platform.

Chapter 1

INTRODUCTION

CHAPTER 1 INTRODUCTION

1-2

1.1 Mainboard Features

CPU

lSupport Intel®Pentium®II/III&Coppermine100/133MHzFSBprocessor.

lSupport350/400/450/500/533/600MHzorhigherprocessor

Chipset

lIntel®820Caminochipset.(324BGA)

-Optimized for Pentium III processor

-AGP4x/2x universal slot

-Support 100/133MHz FSB

lIntel®ICHchipset. (241 BGA)

- AC’97 Controller Integrated

- 2 full IDE channels, up to ATA66

- Low pin count interface for SIO

lIntel®MTHchipset. (241 BGA)

FrontSideBus (FSB)

l100/133MHz clocks are supported.

MainMemory

lSupports three 168-pin DIMM sockets.

lSupportsa maximumSDRAM memorysizeof 512MBor 1GB(32Mx4)

registered DIMM only.

lSupport only SDRAM without ECC Function.

Slots

lOne AMR (Audio Modem Riser)

lOne AGP (Accelerated Graphics Port) slot.

- AGP specification compliant

- AGP66/133/266MHzdevicesupport

lFive 32-bit Master PCI Bus slots and one 16-bit ISA slot(optional).

lSupports 3.3v/5v PCI bus Interface.

Note: If there’s onboard Hardware Audio or LAN. The PCI slot 1 and PCI

slot 5 will be shared.

CHAPTER 1 INTRODUCTION

1-3

On-BoardIDE

lAn IDE controller on the ICH chipset provides IDE HDD/CD-ROM with

PIO, Bus Master and Ultra DMA/66 operation modes.

lCan connect up to four IDE devices.

On-BoardPeripherals

lOn-BoardPeripherals include:

- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

-2serialport (COMA + 1 COMB)

- 1 parallel port supports SPP/EPP/ECP mode

- 2 USB ports

- 1 IrDA connector for SIR.

- 1 LAN port

Audio

lICH chip integrated

lCreativeCT5880.(Optional)

- 64 Voice WaveTable Synthesizer

- Sound Library of over 4000 different sounds

-SupportSPDIF (AC3)

- Support Microsoft Direct Sound, Direct Sound 3D, Direct Music,

and A3DAPI.

Network (Reserved)

lIntel8255910/100M Ethernet (optional)

- WFW baseline & NET PC specs compliant

- Advanced Power Management (ACPI support)

- ARP& Flexible framefiltering

- Software drivers are backwards compatible

- IP checksumming in hardware

- Alert on LAN II(optional)

CHAPTER 1 INTRODUCTION

1-4

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications.

lCPU Voltage setting through BIOS

lFWH Flash BIOS Protect

Dimension

lATXFormFactor: 30.5cmx21cm

Mounting

l6 mounting holes.

Otherfeatures

lCPU core/bus ratio & FSB frequencies setting through BIOS.

lDiagnostic LED system status display

lReset button protect

lKeyboard/Mouse Power on function

lSupport suspend to RAM (STR)

CHAPTER 1 INTRODUCTION

1-5

1.2 Mainboard Layout

PCI SLOT 3

PCI SLOT 2

PCI SLOT 1

ATX

Power Supply

Intel

820

chipset

DIMM 2(shared)

Top: mouse

Bottom:

keyboard

Top: LAN

(optional)

DIMM 1

IDE2

Bottom:

USBPorts

IDE1 FDD

ICH

J11

JFP1

JP1

JGS1

CD_IN

AUX_IN

PSFAN

BATT

Top: LPT

Bottom:

COMA

COMB

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

MS-6301 ATX CA8 Mainboard

MODEM_IN

CPUFAN

JVSB1

AMR

AGP Slot 1

JBAT1

SW2

JMDM1

DIMM 2(shared)

PCI SLOT 4

PCI SLOT 5

ISA SLOT 1

SYSFAN

JP4 FWH

JRMS1

JGL1

JP2

SW1

J13

Intel

82559

(optional)

Creative

CT5880 JP3

WOL

JSTR

MTH

JP6

Slot 1

CHAPTER 2 HARDWARE INSTALLATION

2-1

Chapter 2

HARDWARE INSTALLATION

2.1 Central Processing Unit: CPU

Step 1: Install the Retention Mechanism.

Attach the Retention Mechanism to the Mainboard. Push the Plastic

lock to secure the Retention Mechanism into the mainboard.

Secure the processor by

pulling up the Retention

Mechanism Processor

Lock

Insert the processor

like inserting a PCI or

an ISA card

To release the

processor, push the

Retention Mechanism

Processor lock down

Step 2: Install the Processor.

Insert the Processor like inserting a PCI or an ISA card.

Step 3: Lock the Processor.

Lock the processor by pulling up the Retention Mechanism

processor lock shown above.

Note: The Retention Mechanism processor lock can only be used

with S.E.C.C.2 and S.E.P.P.processor.

2.1-1 Processor Installation Procedure

CHAPTER 2 HARDWARE INSTALLATION

2-2

2.1-2 CPU Core Speed Derivation Procedure

The mainboard CPU Core/Bus ratio and CPU Bus Frequency can

both be set through BIOS setup

If CPUClock = 100MHz

Core/Bus ratio = 4

then CPU core speed = Host Clock x Core/Busratio

= 100MHz x 4

= 400MHz

CHAPTER 2 HARDWARE INSTALLATION

2-3

2.1-3 Overclocking Jumper: SW1

Overclocking is operating a CPU/Processor beyond its specified

frequency. SW1 jumper is used for overclocking.

SW1

SW1 Function

Short

Open

Automatically detect CPU

Bus Frequency

Allows CPU overclocking.

Set 100MHz to 133Mhz

CHAPTER 2 HARDWARE INSTALLATION

2-4

2.1-4 Clocking Jumper for 66MHz (FSB) processor: SW2

This jumper is used to enabled 66MHz (FSB) processor. To be able to

used 66MHz(FSB) processor, you need to set this jumper.

SW2

SW2 Function

Short

Open

Default (if 66MHz FSB processor

is installed, the system will be

unabled to boot)

Allows 66MHz (FSB)

processor to run at

100MHz

CHAPTER 2 HARDWARE INSTALLATION

2-5

2.1-5 CPU Core/Bus Ratio strap to Safe Mode: JP3

This jumper is used to adjust the CPU core/ratio to safe mode.

JP3

JP3 Function

Short

Open

Safe Mode

(Core/Bus Ratio by 2)

Core/Bus Ratio in ICH

Warning: If CPU Core/Bus ratio is set too high that the system hang.

Short pin JP3, then restart the system until boot up, the

CPU core/bus ratio will be set to the default setting by 2.

Properly shutdown the system, and remove the short on

JP3.

Table des matières

Autres manuels MSI Carte mère

MSI

MSI MAG B650 TOMAHAWK WIFI Manuel utilisateur

MSI

MSI 915GVM-V Manuel utilisateur

MSI

MSI G41M4 series Manuel utilisateur

MSI

MSI PRO B760M-G DDR4 Manuel utilisateur

MSI

MSI B650M GAMING PLUS WIFI Manuel utilisateur

MSI

MSI MEG Z490 ACE Manuel utilisateur

MSI

MSI MEG Z490 GODLIKE Manuel utilisateur

MSI

MSI MS-98D2 Manuel utilisateur

MSI

MSI MPG Z790 CARBON WIFI Manuel utilisateur

MSI

MSI MEG Z790 GODLIKE Manuel utilisateur

MSI

MSI B75MA-E31 Sereis Manuel utilisateur

MSI

MSI 848P Neo2-V Series Manuel utilisateur

MSI

MSI B75MA-E31 series Manuel utilisateur

MSI

MSI IM-Q35 Series Manuel utilisateur

MSI

MSI MEG Z590I UNIFY Manuel utilisateur

MSI

MSI H110M PRO-VD Manuel utilisateur

MSI

MSI KT4A-V Manuel utilisateur

MSI

MSI e GF65M-P4 Manuel utilisateur

MSI

MSI MS-9642 Manuel utilisateur

MSI

MSI LPX ZX4 Manuel utilisateur

MSI

MSI Z77A-G41 Series Manuel utilisateur

MSI

MSI 880GMA-E45 series Manuel utilisateur

MSI

MSI MPG B550I GAMING EDGE WIFI Manuel utilisateur

MSI

MSI P965 Neo Series Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur