MSI MS-6147ZX Manuel utilisateur

CHAPTER 1 INTRODUCTION

1-1

The MICRO ATX BX7 mainboard is a high-performance personal computer

mainboard based on the Intel®Pentium®II/III processor. This mainboard

combinesleadingedgeAGPATI®3DRAGEPRO/RAGEPROTurbotechnol-

ogy in graphics and Creative®ES1371/ES1373(reserved) PCI technology in

audio. The Intel®Pentium®II/III processor supports MMXTM (Multimedia

Extension) technology.

The mainboard uses the highly integrated Intel®82443BX AGP chipset to

support the PCI/ISA and Green standards, and to provide the Host/AGP

bridge. The Intel®82371EB chipset integrates all system control functions

such as ACPI (Advanced Configuration and Power Interface). The ACPI

provides more Energy Saving Features for the OSPM(OS Direct Power

Management) function. The Intel®82371EB chipset also improves the IDE

transfer rate by supporting Ultra DMA/33 IDE that transfers data at the rate

of33MB/s.

The mainboard also supports the System Hardware Monitor Controller as an

optional function. Its functions include: CPU /power supply/chassis fan

revolution detect, CPU/system voltage monitor, system temperature monitor,

and chassis intrusion detect(optional).

Chapter 1

INTRODUCTION

CHAPTER 1 INTRODUCTION

1-2

1.1 Mainboard Features

CPU

lSlot 1 for Intel®Pentium®II/III CeleronTM processor.

lSupports233MHz,266MHz,300MHz,333MHz,350MHz,400MHz,

450MHz,andfaster.

Chipset

lIntel®82443BX/PIIX4Echipset.

ClockGenerator

l66/68/75/83/100/112/133MHzclocksare supported.

MainMemory

lSupports four memory banks using two 168-pin unbuffered DIMM.

lSupportsa maximum memorysizeof 256MB(8Mx 8) or512MB(16M x 4)

registered DIMM only.

lSupportsECC(1-bit Error Code Correct) function.

lSupports 3.3v SDRAM DIMM.

Slots

lThree 32-bit Master PCI Bus slots and one 16-bit ISA bus slots.

lSupports 3.3v/5v PCI bus Interface.

On-BoardIDE

lAn IDE controller on the Intel®PIIX4E PCI Chipset provides IDE HDD/

CD-ROM with PIO, Bus Master and Ultra DMA/33 operation modes.

lCan connect up to four IDE devices.

On-BoardPeripherals

lOn-Board Peripherals include:

- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

- 1 serial port (COM A) + 1 serial connector (COM B)

- 1 parallel port supports SPP/EPP/ECP mode

- 2 USB ports

- 1 IrDA connector for SIR.

CHAPTER 1 INTRODUCTION

1-3

VGA

lATI®3DRAGEPRO/RAGE PROTURBO 2x

-Running on AGP BUS.

-Onboard8MBSDRAM.

- 3D Acceleration.

- AGP 2x mode (133MHz) support pipelined and sideband protocols.

Sound

lCreative®ES1371/ES1373(reserved)

-RunningonPCIBUS.

-64Voiceand AC3 Capable (ES1373 only)

- Support Direct Sound and Direct Sound 3D

-AC97’ Compliant

I/OChip

lWinbond®multi super I/O W83977F

- 2M bps fast tape drive, IRQ sharing

- Device Power Management

-Realtimeclock(256bytesRAM)

- 8042-based keyboard controller (support PS/2 mouse)

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications.

lACPI(Advanced Configuration and Power Interface) feature.

Dimension

lMICROATX Form Factor: 24.4cm(L)x 19.2cm(W) x 4layersPCB

Mounting

l6 mounting holes.

CHAPTER 1 INTRODUCTION

1-4

SystemHardwareMonitor(optional)

lCPU/Power Supply/Chassis Fan Revolution Detect

lCPU Fan Control (the fan will automatically stop when the system enters

suspend mode)

lSystem Voltage Detect

lCPU Overheat Warning.

lDisplay Actual Current Voltage

OtherFeatures

lKeyboard Password Wake-Up (reserved)

lLAN Wake-Up

lInternal/External Modem Wake-Up

CHAPTER 1 INTRODUCTION

1-5

PCI SLOT 3

PCI SLOT 2

PCI SLOT 1

ISA SLOT 1

ATX

Power Supply

FW82443BX

SLOT 1

DIMM 2

Top: mouse

Bottom:

keyboard

Top:Port1

USB

DIMM 1

IDE2

Bottom:

Port2

IDE1

FDD

ATI3D

RAGEPRO

FW82371EB

JMDM1

Creative

ES1371

JP1

SYSFAN

JFP1

JGS1

JGL1

JBAT1

JWOL1

BIOS

J6: MDM_IN

J5: AUX_IN

COM 2

CPUFAN

JSOR1

JRMS1

SW1

PSFAN

BATT

Top: LPT

Bottom:

COMA

VGAPort

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

1.2 Mainboard Layout

MS-6147 MICRO ATX BX7 Mainboard

JP2

J8: CD_IN

SDRAM

JVSB1

(Reserved)

System

Hardware

Monitor

(optional)

SDRAM

CHAPTER 2 HARDWARE INSTALLATION

2-1

Chapter 2

HARDWARE INSTALLATION

2.1 Central Processing Unit: CPU

The mainboard operates with Intel®Pentium®II/III/CeleronTM processor.

The mainboard uses a CPU Slot called Slot 1 for easy CPU installation and a

jumper switch (SW1) to set the proper speed for the CPU. The CPU should

always have a Heat Sink and a cooling fan attached to prevent overheating.

CHAPTER 2 HARDWARE INSTALLATION

2-2

2.1-1 CPU Installation Procedures

A. OEM Pentium®II/III Processor Installation Procedures

Different kinds of Pentium®II/III processor that is currently used: the OEM

version, the Boxed version, and CeleronTM. OEM Pentium®II/III Processor

has no Heat Sink, Fan and Heat Sink Support, the Boxed Pentium®II/III

Processor is provided with Heat Sink w/ fan and Heat Sink Support, while

the CeleronTM processor is a plain processor card without cover or heatsink..

Required Things:

Pentium®II/IIIprocessor-Processor.

*RetentionMechanism(RM)- Plastic Guide that holds the S.E.C. Catridge

in the Slot 1 connector.

*RetentionMechanismAttachMount(RMAM)-Bolt/Bridge assemblies

inserted up through the bottom of the

motherboard. RM secures to RMAM ( 2

RMAM required per RM ).

*Heat Sink SupportBase (HSSBASE) - Plastic support bar mounted to

the mainboard under the ATX heatsink.

(One leg is always bigger than the other one)

Processor

Lock

Retention

Mechanism

Pentium®II/III

Processor

Heat Sink

W/Fan

Notch Hole

Heat Sink

Support Base Heat Sink

Support Pin

Heat Sink

Support

Top Bar

CHAPTER 2 HARDWARE INSTALLATION

2-3

*HeatSink Support Pin (HSSPIN)- Plastic pins inserted through the

HSSBASE to secure it to the mainboard (2

required per Assembly).

*Heat Sink Support Top Bar (HSSTOP) - Plastic bar that clips onto the

HSSBASE through the fins on the ATX

heatsink.

**Heat Sink w/ fan - Heat Sink that can be attached to the Pentium®II/

IIIprocessor withmetalclip.

Note:* Provided by MSI mainboard.

** Provided by Special request.

HSSPIN

HSSTOP

HSSBASE

RMAM

CHAPTER 2 HARDWARE INSTALLATION

2-4

SLOT1

Retention

Mechanism

êê

Key

êê

Retention

Mechanism

Attach Mount

Notch

Key

Step 1: Insert the Retention Mechanism Attach Mount at the bottom

of the mainboard.

Step 2: Install the Retention Mechanism.

Look for the key on Slot 1, and match it with the Notch Key on the

Retention Mechanism for proper direction. Then, attach the

Retention Mechanism to the Retention Mechanism Attach Mount.

Use a Screwdriver to secure the Retention Mechanism.

CHAPTER 2 HARDWARE INSTALLATION

2-5

Step 3: Install the Heat Sink Support Base.

Look for the Two holes across Slot 1, and match it with the Two legs

of the Heat Sink Support Base for the proper direction. Take note

that one hole/leg is bigger than the other. The Four top pins of the

Heat Sink Support Base should also be oriented towards Slot 1.

Push the Heat Sink Support Base onto the mainboard, until you hear

a click sound. Check for a perfect fit.

Step 4: Install the Heat Sink Support Pin.

Push the Heat Sink Support Pins onto the two holes of the Heat Sink

Support Base. Check for a perfect fit. These pins are used to secure

the Heat Sink Support Base.

Heat Sink

Support Base

Heat Sink

Support Pin

Leg

pins

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MSI Carte mère

MSI

MSI K7 Master MS-6341 Manuel utilisateur

MSI

MSI X370 GAMING PLUS Manuel utilisateur

MSI

MSI MPG Z390M GAMING EDGE AC Manuel utilisateur

MSI

MSI B450M PRO-M2 V2 Manuel utilisateur

MSI

MSI MS-6309 Manuel

MSI

MSI MS-6198 Manuel utilisateur

MSI

MSI 870S-C45 Series Manuel utilisateur

MSI

MSI X470 GAMING PLUS Manuel utilisateur

MSI

MSI Z370-A Manuel utilisateur

MSI

MSI MAG Z390 TOMAHAWK Manuel utilisateur

MSI

MSI 915GVM-V Manuel utilisateur

MSI

MSI 870A Fuzion Power Edition series Manuel utilisateur

MSI

MSI MS-6315 Manuel utilisateur

MSI

MSI G41M-P26 Manuel utilisateur

MSI

MSI MS-7353 Manuel utilisateur

MSI

MSI Z68A-G43 series Manuel utilisateur

MSI

MSI 845E Neo-V Manuel utilisateur

MSI

MSI P55 GD80 - Motherboard - ATX Manuel utilisateur

MSI

MSI B450M MORTAR MAX Manuel utilisateur

MSI

MSI Z68A-GD65 B3 series Manuel utilisateur

MSI

MSI FUZION Series Manuel utilisateur

MSI

MSI K9AGM2-F Manuel utilisateur

MSI

MSI K8N SLI Platinum Manuel utilisateur

MSI

MSI MEG X570S UNIFY-X MAX Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur