MSI MS-6137 v5.X Manuel utilisateur

Version 5.0

G52-MA00452

MS-6137 (v5.X) Micro ATX Mainboard

MSI

MICRO-STAR INTERNATIONAL

Manual Rev: 5.0

Release Date: Sept. 2001

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU

RESEAU.

Micro-Star International MS-6137

Tested to comply

with FCC Standard

For Home or Office Use

iii

Edition

Sept. 2001

The material in this document is the intellectual property of MICRO-

STAR INTERNATIONAL. We take every care in the preparation

of this document, but no guarantee is given as to the correctness of its

contents. Our products are under continual improvement and we re-

serve the right to make changes without notice.

Trademarks

All trademarks used in this manual are the property of their respective

owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

Revision History

Revision Revision History Date

V5.0 First release for PCB 5.X Sept. 2001

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening that could damage or cause electri-

cal shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

zThe power cord or plug is damaged

zLiquid has penetrated into the equipment

zThe equipment has been exposed to moisture

zThe equipment has not work well or you can not get it work according

to User’s Manual.

zThe equipment has dropped and damaged

zIf the equipment has obvious sign of breakage

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED,STORAGETEMPERATUREABOVE600

C(1400F),IT

MAY DAMAGE THE EQUIPMENT.

Safety Instructions

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer.

CONTENTS

Chapter 1. Introduction ............................................................... 1-1

Mainboard Specification ............................................................ 1-2

Mainboard Layout ..................................................................... 1-4

Quick Components Guide ......................................................... 1-5

Key Features ............................................................................ 1-6

MSI Special Features ................................................................ 1-7

T.O.P Tech™ (optional) ....................................................... 1-7

PC Alert™ III ....................................................................... 1-8

Chapter 2. Hardware Setup ........................................................ 2-1

Central Processing Unit: CPU ................................................... 2-2

CPU Installation Procedures ............................................... 2-2

CPU Core Speed Derivation Procedure ................................ 2-3

Memory Installation ................................................................... 2-4

Memory Bank Configuration ................................................ 2-4

Memory Installation Procedures .......................................... 2-5

Power Supply ............................................................................ 2-6

ATX 20-Pin Power Connector: JWR1 ................................... 2-6

Back Panel ............................................................................... 2-7

Mouse Connector: JKBMS1 ................................................ 2-7

Keyboard Connector: JKBMS1 ............................................ 2-8

USB Connectors ................................................................. 2-8

Serial Port Connector: COM A & COM B ............................ 2-9

Joystick/Midi Connectors .................................................... 2-9

Audio Port Connectors ........................................................ 2-9

Parallel Port Connector: LPT1 ........................................... 2-10

VGA DB 15 Pin Connector ................................................ 2-11

Connectors ............................................................................. 2-12

Floppy Disk Drive Connector: FDD .................................... 2-12

Power Saving Switch Connector: JGS1 ............................. 2-12

Hard Disk Connectors: IDE1 & IDE2 ................................. 2-13

Fan Power Connectors: CPUFAN/SFAN1/PSFAN1 ........... 2-14

CD-In Connector: CD_IN ................................................... 2-15

Aux Line-In Connector: AUX_IN ......................................... 2-15

Modem-In Connector: MODEM_IN .................................... 2-15

Wake On LAN Connector: JWOL1 .................................... 2-16

Wake On Ring Connector: JMDM1 ................................... 2-16

Front Panel Connector: JFP1 or JFP2 (optional Intel spec) 2-17

Front Audio Header: JAUD2 or JAUD1 (optional Intel spec) 2-18

USB Front Header: USB3 or USB2 (optional Intel spec) .... 2-19

IrDA Infrared Module Header: IR or IR2 (optional Intel spec)2-20

Chassis Intrusion Switch Connector: J1 ............................ 2-21

Jumpers .................................................................................. 2-22

Clear CMOS Jumper: JBAT1 ............................................. 2-22

BIOS Flash Jumper: JP3 ................................................... 2-23

Onboard Audio Jumper: JP2 .............................................. 2-23

Slots ....................................................................................... 2-24

AMR (Audio Modem Riser) Slot ........................................ 2-24

PCI Slots .......................................................................... 2-24

ISA Slot ............................................................................ 2-24

PCI Interrupt Request Routing ........................................... 2-25

Chapter 3. AWARD®BIOS Setup .................................................. 3-1

Entering Setup .......................................................................... 3-2

Control Keys ............................................................................. 3-2

Getting Help .............................................................................. 3-3

The Main Menu ......................................................................... 3-4

Standard CMOS Features ......................................................... 3-6

Advanced BIOS Features .......................................................... 3-8

Advanced Chipset Features .................................................... 3-12

Integrated Peripherals ............................................................. 3-15

vii

Power Management Setup ...................................................... 3-20

PNP/PCI Configurations .......................................................... 3-24

PC Health Status .................................................................... 3-26

Frequency/Voltage Control ...................................................... 3-27

Load Fail-Safe/Optimized Defaults .......................................... 3-28

Set Supervisor/User Password ................................................ 3-30

Save & Exit Setup ................................................................... 3-32

Exit Without Saving ................................................................. 3-33

Appendix: Glossary ..................................................................... A-1

Introduction

1-1

Chapter 1.

Introduction 1

The MS-6137 v5.X Micro-ATX WH1 mainboard is a high-performance

computer mainboard based on Intel®810/810E chipset. It is designed for Intel®

Celeron-TualatinTM, Pentium®III and VIA®C3, Samuel2 processors for inex-

pensive business/personal desktop markets.

The Intel®810/810E chipset is the first generation Integrated Graphics

chipset for Intel®CeleronTM and Pentium®III processors. The graphics accel-

erator architecture consists of dedicated multi-media engines executing in par-

allel to deliver high performance 3D, 2D and motion compensation video capa-

bilities. An integrated centralized memory arbiter allocates memory bandwidth

to multiple system agents to optimize system memory utilization. A new chipset

component interconnect, the hub interface, is designed into the Intel®810/

810E chipset to provide an efficient communication channel between the memory

controller hub and I/O controller hub.

The Intel® 810/810E chipset contains three core components. The GMCH

integrates 66/100/133MHz for 810 and 66/100/133 MHz for 810E, P6 family sys-

tem bus controller, integrated 2D/3D graphics accelerator, 100MHz SDRAM

controller and high-speed hub interface for communication with the ICH0/ICH.

The ICH0/ICH integrates an Ultra ATA/33 (ICH0) or Ultra ATA/66 (ICH)

controller, USB host controller, LPC interface controller, FWH interface

controller, PCI interface controller, AC`97 digital controller and a hub interface

for communication with the GMCH/GMCHO. The Intel®82802 Firmware Hub

(FWH) component is part of the Intel®810E chipset. The FWH is key to ena-

bling future security and manageability infrastructure for the PC platform.

This chapter includes the following topics:

Mainboard Specification 1-2

Mainboard Layout 1-4

Quick Components Guide 1-5

Key Features 1-6

MSI Special Features 1-7

Chapter 1

1-2

CPU

zSupports Intel®Socket 370 Pentium III, Celeron-Tualatin, VIA C3, and Samuel2

processors.

zSupports up to 1.1GHz CPU.

Chipset

zIntel®810/810E (GMCH) chipset. (421 BGA)

- Integrated Graphics Controller.

- Intel DDM Architecture.

- SDRAM Memory Independent of System Bus.

zIntel®ICH chipset. (241 BGA)

- AC’97 Controller Integrated.

- 2 full IDE channels, up to ATA66.

- Low Pin Count interface for SIO.

Front Side Bus (FSB)

z66/100/133MHz clocks are supported.

Main Memory

zSupport two 168-pin DIMM sockets.

zSupport a maximum memory size of 256MB(64-bit) or 512MB(128-bit)

SDRAM.

Slots

zOne AMR (Audio Modem Riser) slot.

zThree PCI 2.2 32-bit PCI bus slots (support 3.3v/5v PCI bus interface)

zOne 16-bit ISA bus slot (optional).

On-Board IDE

zAn IDE controller on the ICH chipset provides IDE HDD/CD-ROM with

PIO, Bus Master and Ultra DMA66 operation modes.

zCan connect up to four IDE devices.

On-Board Peripherals

zOn-Board Peripherals include:

- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

- 2 serial ports (COM A + COM B).

Mainboard Specification

Introduction

1-3

- 1 parallel port supports SPP/EPP/ECP mode.

- 4 USB ports (Rear * 2/ Front * 2).

- 1 IrDA connector for SIR.

- 1 VGA port.

- 1 audio/game port.

Video

zGMCH chip integrated.

z2D/3D Graphics.

TV-Out (optional)

zProvide AV-composite and S-video output.

zTV output supporting up to 800*600.

Audio

zAC97 2.0 interface.

zICH chip integrated.

BIOS

zThe mainboard BIOS provides “Plug & Play” BIOS which detects the pe-

ripheral devices and expansion cards of the board automatically.

zThe mainboard provides a Desktop Management Interface (DMI) function

which records your mainboard specifications.

Dimension

zMicro ATX Form Factor.

Mounting

z6 mounting holes.

Table des matières

Autres manuels MSI Carte mère

MSI

MSI MS-7250 Manuel utilisateur

MSI

MSI H110I PRO Manuel utilisateur

MSI

MSI B450M-A PRO MAX Manuel utilisateur

MSI

MSI 946GZ Neo Series Manuel utilisateur

MSI

MSI G52-74111X2 Manuel utilisateur

MSI

MSI B450M PRO-M2 V2 Manuel utilisateur

MSI

MSI MS-6178 Manuel utilisateur

MSI

MSI P35D3 Platinum - Motherboard - ATX Manuel utilisateur

MSI

MSI 694D Pro2 Manuel utilisateur

MSI

MSI X299 TOMAHAWK AC Manuel utilisateur

MSI

MSI Z270M MORTAR Manuel utilisateur

MSI

MSI MAG B760M MORTAR MAX WIFI Manuel utilisateur

MSI

MSI H270 GAMING PRO CARBON Manuel utilisateur

MSI

MSI 865GM2-LS - Motherboard - Micro ATX Manuel utilisateur

MSI

MSI MS-7530 Manuel utilisateur

MSI

MSI MEG Z490 ACE Manuel utilisateur

MSI

MSI Z490-A PRO Manuel utilisateur

MSI

MSI RX480 Neo2 Manuel utilisateur

MSI

MSI MS-98D6 Manuel utilisateur

MSI

MSI MS-6507E Manuel utilisateur

MSI

MSI MS-6330 Manuel utilisateur

MSI

MSI P35 NEO2-FR - Motherboard - ATX Manuel utilisateur

MSI

MSI MAG Z690 TOMAHAWK Manuel utilisateur

MSI

MSI MS-7513 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur