MSI K8MM-V Manuel utilisateur

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case the user will be required to correct the interference at his own

expense.

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.

VOIR LA NOTICE D’NSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-7142

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation

G52-M7142X1

The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every

care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our

products are under continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

AMD, Athlon™ Athlon™XP, Thoroughbred™ and Duron™ are registered trademarks of AMD Corporation.

Intel® and Pentium® are registered trademarks of Intel Corporation.

PS/2 and OS® 2 are registered trademarks of International Business Machines Corporation.

Microsoft® is a registered trademark of Microsoft Corporation. Windows® 98/2000/NT/XP are registered

trademarks of Microsoft Corporation.

NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trademarks of NVIDIA

Corporation in the United States and/or other countries.

Netware® is a registered trademark of Novell, Inc.

Award® is a registered trademark of Phoenix Technologies Ltd.

AMI® is a registered trademark of American Megatrends Inc.

Kensington and MicroSaver are registered trademarks of the Kensington Technology Group.

PCMCIA and CardBus are registered trademarks of the Personal Computer Memory Card International

Association.

Revision History

Revision Revision History Date

V1.0 First released of Multi-language version for PCB 1.x February 2005

with chipsets VIA ® K8M800-CE & VIA ® VT8237R

iii

Safety Instructions

1. Always read the safety instructions carefully.

2. Keep this User Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the equipment from overheating. Do

not cover the openings.

6. Make sure the voltage of the power source and adjust properly 110/220V before connecting the equipment

to the power inlet.

7. Place the power cord such a way that people can not step on it. Do not place anything over the power

cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening that could damage or cause electrical shock.

11. If any of the following situations arises, get the equipment checked by a service personnel:

- The power cord or plug is damaged.

- Liquid has penetrated into the equipment.

- The equipment has been exposed to moisture.

- The equipment does not work well or you can not get it work according to User Manual.

- The equipment has dropped and damaged.

- The equipment has obvious sign of breakage.

12. Do not leave this equipment in an environment unconditioned, storage temperature above 60° C (140°F),

it may damage the equipment.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

Table of Content

English.....................................................................1

Deutsch....................................................................17

Français...................................................................33

简体中文 ...................................................................49

繁體中文 ...................................................................63

日本語.......................................................................77

Introduction

Thank you for choosing the K8MM-V Series (MS-7142 v1.X) micro ATX mainboard. The K8MM-V

Series is based on VIA ® K8M800-CE & VT8237R chipsets for optimal system efficiency. Designed to

fit the advanced AMD ® K8 Athlon64 processors in 754 pin package, the K8MM-V Series delivers a

high performance and professional desktop platform solution.

Layout

SFAN1

CPUFAN1

JPW1

FDD1

SATA1

SATA2

Line-In

Line-Out

Mic

T: L AN j a c k

B: USB ports

Winbond

W83627THF

VIA

K8M800-CE

BATT

DDR1

DDR2

JWR2

JCASE1

IDE1

IDE2

JFP1

JFP2

JBAT1

JAUD1

Top : Parallel Por t

Bottom:

COM A

VGA Port

Top : mouse

Bottom: keyboard

USB ports

BIOS

AGP Slot

PCI Slot 3

PCI Slot 2

PCI Slot 1

JUSB1 JUSB2

JCOM1

(Optional)

Codec

VIA

VT6103L

JSP1

VIA

VT8237R

Specifications

CPU

zSupports 64-bit AMD®K8 Athlon64 processor (Socket 754)

zSupports 3700+ and higher CPU

(For the latest information about CPU, please visit

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php )

Chipset

zVIA®K8M800-CE Chipset

-HyperTransportTM connection to AMD K8 Athlon64 processor

- 8 or 16 bit control/address/data transfer both directions

- 800/600/400/200 MHz “Double Data Rate” operation both direction

- AGP v3.0 compliant with 8x transfer mode

- Graphic integrated

zVIA®VT8237R chipset (487 BGA)

- Supports dual channel native SATA controller up to 150MB/s

- Integrated Hardware Sound Blaster/Direct Sound AC97 audio

- Ultra DMA 66/100/133 master mode PCI EIDE controller

- ACPI & PC2001 compliant enhanced power management

- Supports USB2.0 up to 8 ports

- Supports RAID0 or RAID1

Main Memory

zSupports DDR266/333/400 DDR SDRAM for two 184-pin DDR DIMMs.

zSupports a maximum memory size of 2GB

(For the updated supporting memory modules, please visit

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_list.php )

Slots

zOne (Accelerated Graphics Port) AGP slot.

-AGP 3.0 specification compliant

zThree 32-bit Master 3.3v/5v PCI Bus slots

On-Board IDE

zAn IDE controller on the VIA®VT8237R chipset provides IDE HDD/CD-ROM with PIO, Bus Master

and Ultra DMA 66/100/133 operation modes

zCan connect up to 4 IDE devices

zSerial ATA/150 controller integrated by VT8237R

- Up to 150MB/s transfer rate

- Can connect up to two serial ATA devices

On-Board Peripherals

zOn-Board Peripherals include:

- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M,

- 1 serial port (COMA)

- 1 VGA port

- 1 parallel port supporting SPP/EPP/ECP mode

- 8 USB2.0 ports (Rear*4/Front*4)

- 1 Audio (Line-In/Line-Out/MIC) port

- 1 RJ-45 LAN Jack

- 2 IDE ports support 4 IDE devices

- 2 serial ATA ports

- 1 JCOM1 pin header(Optional)

Audio

z6 channels software audio codec VIA VT1617A.

- Compliance with AC97 v2.3 Spec.

- Meet PC2001 audio performance requirement.

LAN

zVIA®VT6103L 10/100 Mb/s phy.

- Compliant with PCI v2.2.

- Supports ACPI Power Management.

BIOS

zThe mainboard BIOS provides “Plug & Play” BIOS which detects the peripheral devices and

expansion cards of the board automatically.

zThe mainboard provides a Desktop Management Interface (DMI) function that records your

mainboard specifications.

Dimension

zMicro-ATX Form Factor: 243mm x 195mm.

Mounting

z6 mounting holes.

Rear Panel

The back panel provides the following connectors:

board

USB Ports

Mouse

COM

ort

Parallel Port

Line In

Line Ou

Mic In

LAN

USB Ports

Hardware Setup

This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as how to

setup the jumpers on the mainboard. It also provides the instructions on connecting the peripheral

devices, such as the mouse, keyboard, etc. While doing the installation, be careful in holding the

components and follow the installation procedures.

Central Processing Unit: CPU

The mainboard supports AMD ® Athlon64 processor. The mainboard uses a CPU socket called

Socket-754 for easy CPU installation. When you are installing the CPU, make sure the CPU has a heat

sink and a cooling fan attached on the top to prevent overheating. If you do not have the heat sink and

cooling fan, contact your dealer to purchase and install them before turning on the computer.

(For the latest information about CPU, please visit

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php )

Example of CPU Core Speed Derivation Procedure

If CPU Clock = 200MHz

Core/Bus ratio = 12

then CPU core speed = Host Clock x Core/Bus ratio

= 200MHz x 12

=2.4GHz

Memory Speed/CPU FSB Support Matrix

Memory

FSB

DDR 266 DDR 333 DDR 400

800 MHz OK OK OK

CPU Installation Procedures for Socket 754

1. Please turn off the power and unplug the power cord before installing the CPU.

2. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-degree

angle.

3. Look for the gold arrow on the CPU. The CPU can only fit in the correct orientation. Lower the

CPU down onto the socket.

4. If the CPU is correctly installed, the pins should be completely embedded into the socket and

can not be seen. Please note that any violation of the correct installation procedures may

cause permanent damages to your mainboard.

5. Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move

while the lever is being closed, always close the lever with your fingers pressing tightly on top of

the CPU to make sure the CPU is properly and completely embedded into the socket.

Installing AMD Athlon64 CPU Cooler Set

When you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the

top to prevent overheating. If you do not have the heat sink and cooling fan, contact your dealer to

purchase and install them before turning on the computer.

1. Detach the shield of the backplate’s paster.

2. Turn over the mainboard, and install the backplate to the proper position.

3. Turn over the mainboard again and place the mainboard on the flat surface. Locate the two

screw holes of the mainboard.

4. Align the retention mechanism and the backplate. Fix the retention mechanism and the

backplate with two screws.

Table des matières

Langues :

Autres manuels MSI Carte mère

MSI

MSI MS-6137 Manuel utilisateur

MSI

MSI NF980-G65 series Manuel utilisateur

MSI

MSI K8N NEO4-F - Motherboard - ATX Manuel utilisateur

MSI

MSI MS-7353 Manuel utilisateur

MSI

MSI MS-7392 Manuel utilisateur

MSI

MSI MPG B760I EDGE WIFI DDR4 Manuel utilisateur

MSI

MSI Z270-A PRO Manuel utilisateur

MSI

MSI PRO B660M-P WIFI DDR4 Manuel utilisateur

MSI

MSI P55-CD53 series Manuel utilisateur

MSI

MSI MEG Z490 UNIFY Manuel utilisateur

MSI

MSI MS-5184 Manuel utilisateur

MSI

MSI P55-GD80 series Manuel utilisateur

MSI

MSI P55-GD55 Manuel utilisateur

MSI

MSI Z87-G43 GAMING Manuel utilisateur

MSI

MSI C847MS-E33 Series Manuel utilisateur

MSI

MSI 845 PRO4 Manuel utilisateur

MSI

MSI MPG Z690 EDGE TI WIFI DDR4 Manuel utilisateur

MSI

MSI 946GZ Neo Series Manuel utilisateur

MSI

MSI X470 GAMING PLUS Manuel utilisateur

MSI

MSI IM-GM45 Manuel utilisateur

MSI

MSI MS-6558/G Manuel utilisateur

MSI

MSI Z87-G55 Manuel utilisateur

MSI

MSI MS-6551 Manuel utilisateur

MSI

MSI 945G Neo2 Series Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur