MRC CD-4307SD Manuel utilisateur

SD card real time data logger

TDS ( Total dissolved solids ), Salt

CONDUCTIVITY METER

Your purchase of this

CONDUCTIVITY METER

with SD CARD

DATA LOGGER marks a

step forward for you

into the field of

precision measurement.

Although this meter a

complex and delicate

instrument, its durable

structure will allow

many years of use if

proper operating

techniques are

developed. Please read

the following

instructions carefully

and always keep this

manual within easy

reach.

OPERATION MANUAL

Model : CD-4307SD

3, Hagavish st. Israel 58817 Tel: 972 35595252, Fax: 972 3 5594529 [email protected]

MRC. 2.19

TABLE OF CONTENTS

1. FEATURES................................................................

2. SPECIFICATIONS......................................................

2-1 General Specifications..........................................

2-2 Electrical Specifications........................................

3. FRONT PANEL DESCRIPTION.....................................6

4. MODE SELECTION.....................................................8

5. CONDUCTIVITY/TDS MEASURING and

CALIBRATION PROCEDURE.......................................

5-1 Conductivity measurement...................................

5-2 TDS ( PPM ) measurement...................................

5-3 Calibration...........................................................11

6. SALT MEASURING and calibration PROCEDURE...........13

6-1 Salt measurement................................................13

6-2 Calibration...........................................................14

7. OTHER FUNCTION....................................................

7-1 Data Hold............................................................14

7-2 Record ( Max./ Min. reading )...............................14

7-3 LCD Backlight ON/OFF.........................................

8. DATALOGGER...........................................................

8-1 Preparation before execute datalo

er function..................15

8-2 Auto Datalo

er ( Set samplin

time 1 second )............≧16

8-3 Manual Datalo

er ( Set samplin

time = 0 second ).........

8-4 Check time information.....................................................17

8-5 Check samplin

time information.......................................18

8-6 SD Card Data structure.....................................................18

9. Saving data from the SD card to the computer............20

10. ADVANCED SETTING...............................................22

11. POWER SUPPLY from DC ADAPTER..........................

12. BATTERY REPLACEMENT.........................................

13. SYSTEM RESET.......................................................

14. RS232 PC SERIAL INTERFACE..................................29

15. OPTIONAL ACCESSORIES........................................

16. PATENT..................................................................

1. FEATURES

* One meter for multi purpose operation :

Conductivity, TDS ( Total dissolved solids ), Salt measurement.

*Conductivity : 200 uS/2 mS/20 mS/200 mS.

* Salt : 0 to 12 % salt ( % weight ).

* Conductivity measurement can select Temp. Coefficient

of measurement solution.

*ATC for the conductivity measurement.

* Separate probe, easy for operation of different

measurement environment.

* Real time SD memory card Datalogger, built-in Clock

and Calendar, sampling time can set from 1 sec to 8

hour 59 min. 59 sec.

* Manual datalogger is available, during execute the

manual datalogger function, it can set the different

location no. ( position 1 to position 99 ).

* Innovation and easy operation, computer is not need to

setup extra software, after execute datalogger, just take

away the SD card from the meter and plug in the SD card

into the computer, it can down load the all the measured

value with the time information ( year/month/date/

hour/minute/second ) to the Excel directly, thenuser can

make the further data or graphic analysis by themselves.

* SD card capacity : 1 GB to 16 GB.

* LCD with green light backlight, easy reading.

* It can default auto power off or manual power off.

* Data hold, record max. and min. reading.

* Microcomputer circuit, high accuracy.

* Power by UM3/AA ( 1.5 V ) x 6 batteries or DC 9V adapter.

* RS232/USB PC COMPUTER interface.

* Wide applications: water conditioning, aquariums,

beverage, fish hatcheries, food processing, photography,

laboratory, paper industry, plating industry, quality

control, school & college, water conditioning.

2. SPECIFICATIONS

2-1 General Specifications

Circuit Custom one-chip of microprocessor LSI

circuit.

Display LCD size : 52 mm x 38 mm

LCD with green backlight ( ON/OFF ).

Measurement * Conductivity ( uS, mS )

Function * TDS ( Total Dissolved Solids, PPM )

* Salt ( % Weight )

* Temperature ( , )℃℉

Temperature Automatic from 0 to 60 (32 - 140 ),℃℉

Compensation with temperature compensation factor

variable between 0 to 5.0% per C.

Conductivity Carbon rod electrode for long life.

Probe

Datalogger Auto 1 sec to 8 hour 59 min. 59 sec.

Sampling Time

@ Sampling time can set to 1 second,

Setting range

but memory data may loss.

Manual Push the data logger button

once will save data one time.

@ Set the sampling time to

0 second.

@ Manual mode, can also select the

1 to 99 position ( Location ) no.

Memory Card SD memory card. 1 GB to 16 GB.

Advanced * SD memory card Format

setting * Set clock time ( Year/Month/Date,

Hour/Minute/ Second )

*Set sampling time

*Auto power OFF management

*Set beep Sound ON/OFF

*Decimal point of SD card setting

*Set temperature unit to or℃℉

*Set CD temperature compensation factor

Data Hold Freeze the display reading.

Memory Recall Maximum & Minimum value.

Sampling Time Approx. 1 second.

of Display

Data Output RS 232/USB PC computer interface.

* Connect the optional RS232 cable

UPCB-02 will get the RS232 plug.

* Connect the optional USB cable

USB-01 will get the USB plug.

Operating Meter 0 to 50 .℃

Temperature Probe 0 to 60 .℃

Operating Less than 85% R.H.

Humidity

Power Supply

Alkaline or heavy duty DC 1.5 V battery

( UM3, AA ) x 6 PCs, or equivalent.

DC 9V adapter input. ( AC/DC power

adapter is optional ).

Power Current Normal operation ( w/o SD card save

data and LCD Backlight is OFF) :

Approx. DC 14 mA.

When SD card save the data and LCD

Backlight is OFF) :

Approx. DC 37 mA.

If LCD backlight on, the power

consumption will increase approx.

12 mA.

Weight 489 g/1.08 LB.

Dimension Meter 177 x 68 x 45 mm

(7.0 x 2.7x 1.9 inch)

Probe Round,

22 mm Dia. x 120 mm length.

Accessories * Instruction manual......................1 PC

Included * Conductivity/TDS/Salt probe,

CDPB-03.................................... 1 PC

* Hard carrying case ( CA-06 ).......

1 PC

Optional * 1.413 mS Conductivity Standard

Accessories Solution...............................CD-14

SD memory card ( 1 GB )

SD memory card ( 2 GB )

AC to DC 9V adapter.

USB cable, USB-01.

RS232 cable, UPCB-02.

Data Acquisition software,SW-U801-WIN.

2-2 Electrical Specifications (23±5 )℃

Conductivity ( uS, mS )

Range Measurement Resolutio

Accuracy

200 uS 0 to 200.0 uS 0.1 uS

2 mS 0.2 to 2.000 mS 0.001 mS ± (2% F.S.+1d)

20 mS 2 to 20.00 mS 0.01 mS * F.S. -

200 mS 20 to 200.0 mS 0.1 mS full scale

* Temperature Compensation :

Automatic from 0 to 60 ( 32 - 140 ), with temperature℃℉

compensation factor variable between 0 to 5.0% per C.

* The accuracy is specified under measurement value 100 mS.≦

* mS - milli Simens * @ 23± 5℃

TDS ( Total Dissolved Solids )

Range Measurement Resolutio

Accuracy

200 PPM 0 to 132 PPM 0.1 PPM

2,000 PPM 132 to 1,320 PPM 1 PPM ± (2% F.S.+1d)

20,000 PPM 1,320 to 13,200 PPM 10 PPM * F.S. -

200,000 PPM 13,200 to 132,000 PPM 100 PPM full scale

* Temperature Compensation :

Automatic from 0 to 60 ( 32 - 140 ), with temperature℃℉

compensation factor variable between 0 to 5.0% per .℃

* The accuracy is specified under measurement value 66,000 PPM.≦

* PPM - parts per million * @ 23± 5℃

Temperature

Function Measuring Range Resolutio

Accuracy

℃0 to 60℃℃ 0.1 ℃±0.8℃

℉32 to 140℉℉ 0.1 ℉±1.5℉

* @ 23± 5℃

Salt

Measurement 0 to 12 % salt ( % weight ).

Range

Resolution 0.01 % salt.

Accuracy 0.5 % salt value

* F.S. : full scale.

3. FRONT PANEL DESCRIPTION

3-1 Display

3-2 Power Button ( Backlight Button )

3-3 Hold Button ( ESC Button )

3-4 REC Button ( Enter Button )

3-5 Mode Button ( Button )▲

3-6 Range Button ( Button )▼

3-7 Time Button

3-8 Logger Button ( SET Button, Sampling check )

3-9 Stand

3-10 Battery Compartment/Cover

3-11 Battery Cover Screw

3-12 Tripod Fix Nut

3-13 Probe Socket

3-14 DC 9V Power Adapter Input Socket

3-15 Reset Button

3-16 RS-232 Output Terminal

3-17 SD card socket

4. MODE SELECTION

1)Turn on the meter by pressing the " Power Button "

( 3-2, Fig. 1 ) momentarily.

*Pressing the " Power Button " ( 3-2, Fig. 1 )

continuously and > 2 seconds again will turn off the

meter.

2)The meter can select 3 kind Mode as :

a. Conductivity, TDS measurement

b.TDS measurement

c. Salt measurement

Pressing the " Mode Button " ( 3-5, Fig. 1 ) once, the

Display will show the following text in sequence :

Cd Conductivity measurement

tdS 'TDS measurement

SALt Salt measurement

Until the Display show the desired mode the meter will

execute this Mode with default.

5. CONDUCTIVITY/TDS MEASURING

and CALIBRATION PROCEDURE

The meter default function are following :

*The display unit is set to conductivity ( uS, mS ).

*The temperature unit is set to .℃

*Temp. compensation factor is set to 2.0% per C.

*Auto range.

*Auto power off.

*The sampling time of data logger function is

2 seconds.

Table des matières

Autres manuels MRC Instrument de mesure

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur