Moza Slypod E Manuel utilisateur

SLYPOD E

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

English

3 –20

Čeština

21 –41

Slovenčina

42 –62

Magyar

63 –84

Deutsch

85 –107

The product user guide contains product features, how to use, and the operating

procedure. Read the user manual carefully to get the best experience and avoid

unnecessary damage. Keep this manual for future reference. If you have any questions

or comments about the device, please contact the customer line.

✉www.alza.co.uk/kontakt

✆+44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Disclaimer and Warning

•This document is related to the safety use and legal rights of your equipment. Please

read it carefully before the first use.

•By using this product, you are deemed to have read, understood, endorsed and

accepted all the terms and content of this statement. You are solely responsible for

the use of this product and the consequences thereof. You undertake to use this

product for legitimate purposes and agree to the terms and any relevant regulations,

policies and guidelines formulated by Shenzhen Alza Technology Co., Ltd.

(hereinafter referred to as Alza). Alza is not responsible for damage, injury or any

legal problems caused by the direct or indirect use of this product. Users should

follow all safety guidelines including but not limited to this document.

•Mini-MX is professional videography equipment. Users need to have professional

videography and safety knowledge and need to be careful. Please read the user

manual carefully before the first use.

•This product is not a toy and not suitable for use by minors. Do not allow children to

operate this product.

•Do not use with products or accessories that are not provided or recommended by

Alza, and please strictly follow the safety guidelines in the product manual.

•The final interpretation of this document belongs to Shenzhen Alza Technology Co.,

Ltd. Updates are subject to change without notice. Please visit the official website

www.gudsen.com for the latest product

Safety Guidelines

Safety Instructions for Charging

Do not use an unofficial charging cable for external DC power to prevent the gimbal

from working properly and causing unnecessary damage.

•Do not put the equipment into the water or get it wet!

•Do not charge the equipment under fire or extremely hot conditions! Do not use or

store the equipment near heat sources such as fire or heaters! If the battery leaks or

gives off an odor, remove the equipment from the open fire immediately!

•Do not use the unqualified adapter to charge the equipment!

•Do not disassemble and install the equipment to prevent the gimbal from working

properly!

•Do not use the equipment extremely harsh environments to prevent the gimbal

from working properly!

•Do not pierce the equipment with nails or other sharp objects. Do

•not hammer or pedal the equipment!

•Do not hit, throw or shake the equipment!

•Do not solder the equipment terminal directly!

•Do not disassemble the equipment in any way!

•Do not put the equipment into microwave or pressure vessel!

•Do not use if the battery emits odor, heat, deformation, discoloration, or any other

abnormality; If the equipment is in use or charging, unplug the power adapter from

the device and stop using it immediately!

Battery Charging

The Slypod E is equipped with a Type-C interface, supporting 5V2A low-speed charging.

The fast charge protocol is not supported. Users can select the matched charger

according to actual needs. Please use the TYPE-C interface to charge the battery and do

not use external power sources such as wall outlet or car cigarette lighter to charge the

battery.

Battery Charging Instructions

The MOZA Slypod E has a built-in lithium battery. Fully charge the battery before the first

use to active the battery.The solid red light indicate that the equipment is charging, and

the solid blue light indicate that the charging is complete. With universal Type-C port, the

MOZA Slypod E can be charged by phone charger or power bank.

he charging stops automatically when the battery gets full.

1. Please use the original charging cable provided in the package! (5V 2A low-speed

charging input is supported, the fast charge protocol is not supported)

2. Please do not overcharge or over-discharge the battery. Otherwise the battery will be

damaged;

3. Recharge and discharge the battery every 3 months to keep it activated if it is left

unused for a long time

Battery Protection

The Slypod E has under-voltage, overcurrent protection function. Battery protection

state will be triggered by abnormal conditions such as overuse or short circuit. When the

battery enters the protection state, it stops output with a warning red color light.

MOZA Slypod E Overview

1/4” and 3/8” Extension Hole

Quick Release Adapter

Arca-Swiss

Quick Release

Charging

Port

Quick Release

Screw

Operation Button

Main Body

Indicator

Light

Power Button

Quick

Mounting Port

Adapter (accessory)

There is a 1/4" extension screw hole

on the top of the adapter, and it

comes with a 1/4” to 3/8” adapter

screw to meet different shooting

devices.

Arca-Swiss Quick Release

There is a 1/4” screw hole and a 3/8”

screw hole on the body of Arca-Swiss

quick release which can meet various

extension needs. (When connecting the

body with monopod or tripod via the

Arca-Swiss quick release, the Slypod E

can be used as a motorized slider)

Tripod

There is a 1/4" extension screw on top of the tripod, which can be used for support and

extension, the tripod can be used as a handle when the legs are not open. (The main

body must be connected to the stand adapter to connect the tripod)

Stand Adapter

There are 1/4" extension screw holes on the stand

adapter which enable the body to connect with

tripod or other accessories to mount different

shooting devices.

Mounting

Mounting the adapter

Push the quick mounting port from the bottom of the

adapter into the groove at the top of the pole until

fully fit. After connected, tighten the knob clockwise to

secure the adapter onto the pole; Turn counter-clockwise

to loosen the knob , then turn the knob counter-

clockwise to detach the adapter from the pole. Reset the

quick release knob after the adapter is detached.

Getting Started

Long press for 3 seconds: Power on/off

Button Operations

Power button

Device

status

Extend +

Retract –

Click

once

Photo taking

control via the

shutter cable

Static

Start to extend

Start to retract

―

Extend

Accelerate by one gear

Decelerate by one

gear

―

Retract

Decelerate by one

gear

Accelerate by one gear

Click all three buttons at the same time: reset (blinking white)

Long

press

Power on

Static

Start to extend and

continue to accelerate

Retract and continue

to accelerate

―

Extend

Keep extending and

continue to accelerate

Extending decelerates

first, then start to

retract

―

Retract

Retracting accelerates

first, then start to

extend

Keep retracting and

continue to accelerate

―

Long press +/- buttons at the same time:

automatic reciprocating mode (The blue light

lasts for 1s indicate a mode switch.)

Double

click

Stop

―

Triple

click

Reset + Turn Off

(Blinking red)

―

App Download

Scan the QR code below or search in the App Store to

download the MOZA Master App.

Device Connection (Wireless)

Download the "MOZA Master" App.

a. Turn on the Slypod E and mobile phone Bluetooth.

b. Launch the "MOZA Master", select the device to connect.

c. Enter the operation interface after connection is completed.

App Operation

It is required to activate the device according to the instructions before the

first operation. Please refer to the latest App version. There is no further notice

for App updates, please check on our official website and the App store.

When the Slypod E is controlled by the App, other buttons will be disabled

except for the power button.

Regular Mode

Slide the red operating point from the starting point to any position, the Slypod E will

move accordingly. Release the operating point, the Slypod E will stop moving. Long click

Downwards or Upwards icon, the Slypod E will automatically move up or down. Click

Downwards or Upwards icon again to stop the movement. Click the ‘Take photo’ icon,

and Slypod E will control the camera to take a photo. (Please make sure your Slypod E is

connected with the camera control cable, the camera control cable needs to be

purchased separately). Speed Setting: Click Speed icon to set the speed, and the Slypod

E will move according to the set speed.

Maximum moving

distance is 280mm

Operating Point, the

current movement

distance is 60mm

Long click to control the

movement, click again

to stop movement

Long click to control the

movement, click again to

stop movement

Set the up-and-down

movement speed of

the Slypod E

Control the camera

to take photos

Autres manuels pour Slypod E

Table des matières

Langues :

Autres manuels Moza Accessoires pour appareils photo

Moza

Moza Mini MX Manuel utilisateur

Moza

Moza Slypod Manuel utilisateur

Moza

Moza iFocus M Manuel utilisateur

Moza

Moza Mini-MX Manuel utilisateur

Moza

Moza Mini-MI Manuel utilisateur

Moza

Moza iFocus Manuel utilisateur

Moza

Moza Slypod Manuel utilisateur

Moza

Moza Mini MX 2 Manuel utilisateur

Moza

Moza Mini-P Manuel utilisateur

Moza

Moza Mini-MX Manuel utilisateur

Moza

Moza SLYPOD PRO Manuel utilisateur

Moza

Moza AirCross 2 Manuel utilisateur

Moza

Moza Mini-P Manuel utilisateur

Moza

Moza Mini-S Manuel utilisateur

Moza

Moza AirCross 3 Manuel utilisateur

Moza

Moza Mini MX Manuel utilisateur

Moza

Moza iFocus Manuel utilisateur

Moza

Moza AirCross 2 Manuel utilisateur

Moza

Moza NANO SE Manuel utilisateur

Moza

Moza AIR Manuel utilisateur

Moza

Moza AirCross 3 Manuel utilisateur

Moza

Moza AirCross 2 Mode d’emploi

Moza

Moza Air 2S Manuel utilisateur

Moza

Moza Air 2 Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur