Motorola WA9901 Instructions de montage

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

WA9901 - RFID MODULE UHF LINEAR (NA) ENDCAP

H/W INSTALLATION SHEET

Important: All Approval and safety information is outlined in the ‘WORKABOUTPRO4

Regulatory & Warranty Guide –part number 8000296 provided with each

WORKABOUTPRO4.

Warning:The WORKABOUTPRO4 with the RFID option must not be held closer than 20 cm from

the rest of the body. This product must not be used in a holster or on a belt-clip. RFID cannot be

used in co-transmission with WAN module.

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

1. Product Description

Easily installable expansion modules for the WORKABOUT PRO4 allow you to customise this hand-held

to meet your specific mobile computing requirements. This chapter outlines how to install the NA UHF

Linear RFID Module.

The RFID MODULE UHF LINEAR (WA9901) kit is based on the Sailfish UHF module from

MOTOROLA Inc. (Model: 21-121559). It is made of 4 parts:

ASSY MODULE UHF WAP4 NA

ASSY ANTENNA LINEAR NA WAP4

INSTRUCTION SHEET WAP4 UHF LINEAR NA

LABELS FCC WAP4 UHF LINEAR VARIANT

Figure 1-1 ASSY MODULE UHF WAP4 NA Figure 1-2 ASSY ANTENNA LINEAR NA WAP4

Figure 1-4 LABELS FCC WAP4

UHF LINEAR VARIANT

Figure 1-3 INSTRUCTION SHEET WAP4 UHF LINEAR NA

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

2. Product Installation

Before installing a module in the WORKABOUT PRO4, all power sources must be turned off.

Remove the battery. If your unit is using AC power, disconnect it.

Figure 2-1 Battery location

With the power shut down, you can now install the NA RFID Module UHF Linear.

Remove the existing endcap and pod or backplate

Figure 2-2 WAP4 Disassembled

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

Slide the RFID Module inside the back opening

Figure 2-3 RFID Module Assembly

Drive the 4 screws that fix the RFID module on WAP4 frame

Figure 2-4 RFID Module Assembly

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

Place the antenna in the right slot:

For WAP4 with WLAN only (7528XUHFE), antenna must be placed in the bottom slot

Figure 2-5 Antenna position for WLAN only WAP4 version

For WAP4 with WWAN (7528XPUHFN), antenna must be placed in the middle slot

Figure 2-6 Antenna position for WWAN WAP4 version

Antenna should be correctly inserted in the rubber

Figure 2-7 Right insertion (antenna is pushed totally in the rubber)

Figure 2-8 Wrong insertion (antenna comes out of the rubber)

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

Drive the 2 self-tapping screws to fix the antenna stopper

Figure 2-9 Antenna stopper assembly

Plug the U.FL antenna connector to the Sailfish module.

Warning: Make sure you use the proper RF port (right side of the Sailfish)

Figure 2-5 Linear antenna Assembly

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

Reassemble the pod or backplate and the endcap

Figure 2-6 Final Assembly

IF the model number of WorkAbout Pro4 is 7528XUHFA (WWAN version) put this label:

Figure 2-7 FCC/IC Label for WWAN variant

IF the model number of WorkAbout Pro4 is 7528XPUHFA (WLAN only) put this label type:

Figure 2-8 FCC/IC Label for WLAN variant

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

Stick the label in the location following depends on WorkAbout Pro4 variant:

Figure 2-9 WorkAbout Pro4 Long Alphanumeric Keyboard Figure 2-10 WorkAbout Pro4 Short Numeric Keyboard

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

3. Software installation:

To get current driver for WorkAbout Pro4, go to the website at:

http://community.psion.com/downloads/developer_sdkhdk/m/rfid_sdk/

Copy and install the latest CAB file named “WAP4_WM_RFID_UHF”.

Figure 3-1 Driver CAB file Figure 3-2 Driver sucFCC/ICssfully Installed

After installation, select RFID Demo in the Start menu to start the RFID sample application.

Figure 3-3 RFID demo Icon Figure 3-4 RFID Sample Application Window

Sept 10, 2014

8073681 C

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark

Holdings, LLC and are used under license. All other trademarks are the property of their respective owners..

To read the ID of TAG, press the Start Reading button ID Button. Put the TAG in front of the

antenna. Tap Stop Reading to terminate tag reading.

Figure 3-5 ID Tag Reading

For detailed instructions on how to use the RFID demo application, please visit

http://www.motorolasolutions.com and download ‘RFID Demo Applications User Guide (P/N 72E-

160038-01)’

4. Reading area:

This area depends on the TAG type, TAG packaging, Tag position and environment (metallic

or not).

Figure 4-1 Reading area

Reading Area

Tag

Autres manuels pour WA9901

Table des matières

Autres manuels Motorola Unité de contrôle

Motorola

Motorola M68EML08GZ16 Manuel utilisateur

Motorola

Motorola SE955 Guide de configuration rapide

Motorola

Motorola 56F827 Instructions d'utilisation

Motorola

Motorola MVME2300 Series Guide de démarrage rapide

Motorola

Motorola M68EM05D32 Manuel utilisateur

Motorola

Motorola MVME712-10 Manuel utilisateur

Motorola

Motorola MVME123 Manuel utilisateur

Motorola

Motorola ACE3600 RTU Manuel utilisateur

Motorola

Motorola 56F8323 Manuel utilisateur

Motorola

Motorola MVME147 Guide de démarrage rapide

Motorola

Motorola MVME410 Manuel utilisateur

Motorola

Motorola MVME2300SC Series Guide de démarrage rapide

Motorola

Motorola M68705EVM Manuel utilisateur

Motorola

Motorola Canopy Manuel utilisateur

Motorola

Motorola M68EM05C0 Manuel utilisateur

Motorola

Motorola moto g20 Mode d’emploi

Motorola

Motorola Canopy Subscriber Module Manuel utilisateur

Motorola

Motorola MVME712M Guide de démarrage rapide

Motorola

Motorola MVME2400 Series Manuel utilisateur

Motorola

Motorola ASTRO APX O9 Manuel utilisateur

Motorola

Motorola C24 CDMA 1X Manuel utilisateur

Motorola

Motorola PRPMC750 Mode d’emploi

Motorola

Motorola MVME224A Series Manuel utilisateur

Motorola

Motorola DSP56852 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur