Motic BA310Met-H Manuel utilisateur
1
We are constantly endeavouring to improve our instruments and to adapt them to the requirements of
modern research techniques and testing Methods. This involves modification to the mechanical
structure and optical design of our instruments.
Therefore, all descriptions and illustrations in this instruction manual, including all specifications are
subject to change without notice.
2
INFINITY OPTICAL SYSTEM
An optical configuration (in which the specimen is located at the front focal plane of the objective)
gathers light transmitted through or reflected from the central portion of the specimen and
produces a parallel bundle of rays projected along the optical axis of the microscope toward the
tube lens.
A portion of the light reaching the objective originates from the periphery of the specimen, and
enters the optical system at oblique angles, moving forward diagonally but still in parallel bundles
toward the tube lens. All of the light gathered by the tube lens is then focused at the intermediate
image plane, and subsequently enlarged by the eyepiece.
The real merit of the infinity based system lies in its ability to accommodate modular accessories in
the optical path and produce a flexible design.
3
TABLE OF CONTENTS
1. Description 5
1.1 Application 5
1.2 Nomenclature 6
1.3 Main specifications 8
2. Operation environment 8
3. Assembling the Microscope 9
3.1 Input voltage 9
3.2 Illumination (halogen lamp) 9
3.3 Focusing Block 9
3.4 Stand 9
3.5 Mechanical Stage 9
3.6 Objective 9
3.7 Epi Illuminator 10
3.8 Eyepiece tube 11
3.9 Eyepiece 11
3.10 Filter 11
4. Microscopy 12
4.1 Power switch and Illumination Brightness Adjustment 12
4.2 Coarse and Fine Focusing 12
4.3 Coarse Focus Torque Adjustment 13
4.4 Stage upper limit stop adjustment 13
4.5 Adjustor 14
4.6 Interpupillary Distance Adjustment 14
4.7 Diopter Adjustment 14
4.8 Use of Polariser and Analyser 15
4.9 Field Diaphragm Centering 15
4.10 Aperture Diaphragm Adjustment 16
4.11 Brightness and Contrast Adjustment 17
4.12 Blub Replacement 17
4
5. Photomicrographic Procedure 19
6. Troubleshooting Table 20
6.1 Optical 20
6.2 Electrical 21
7 Care and Maintenance 22
7.1 Lenses and Filters 22
7.2 Cleaning of painted or plastic components 22
7.3 Instrument storage 22
5
1. DESCRIPTION
1.1 Application:
The Motic BA310Met-H is suitable for use in all areas of research and industry observing opaque
material, e.g. in
a. Metallography
b. Mineralogy
c. Mechanical engineering
d. Electronics
Except bright field observation, BA310Met-H is also used for polarized light observation.
BA310Met-H can be installed with digital camera, video camera for photomicrography.
6
1.2 Nomenclature
1.2.1 BA310Met-H
(Fig.1)
1. Eyepiece 2. Bincular eyepiece tube 3. EPI illuminator
4. Revolving nosepiece 5. XY-axis travel knobs 6. Stand
7. Photo port 8. Pole 9. Focusing block
10. Metallography objective 11. Mechanical stage (optional) 12. Lamp house
13. Lamp house power cable 14. MRL100 Power unit
7
1.2.2 EPI Illuminator
(Fig.2)
1. Clamp screw 2. Field diaphragm adjustment wheel
3. Field diaphragm centering screw 4. Aperture diaphragm adjustment wheel
5. Analyser 6. Main body
7. Polariser 8. Filter silder
9. 50W Halogen lamp house
8
1.3 Main Specifications
Model BA310Met-H
Total Magnification 50x ~ 500x (optional, magnification max.: 1000x)
Eyepieces High eye-point, N-WF 10x (FN20), Diopter adjustable
Infinite Metallurgical Plan Objectives 5x/ 0.13, 10x/ 0.30, 20x/ 0.40, 50x/ 0.55 (optional 100x/ 0.80)
Observation Tube 30° Inclined Siedentopf Trinocular Head
Interpupillary Distance 55 ~ 75mm
Nosepiece Reversed quadruple
Focusing Block Coaxial movement; 30mm stroke; 0.2mm/ turn
2μm minimum increments
Epi illumination 12V/ 50W halogen; reflected light system
Filters (for Epi illumination) Frosted glass, Blue, Yellow, Green
Mechanical Stage Dimension: 180mm X 140mm,
Movement Range: 100mm X 80mm
Stand Stand dimension: 300mm X 300mm
2. OPERATION ENVIRONMENT
Avoid placing the instrument in locations exposed to direct sunlight, dust, vibration, high temperature,
high humidity and where it is difficult to unplug the power supply cord.
Indoor use
Altitude: Max 2000 Meters
Ambient temperature: 5°C to 40°C
Maximum relative humidity: 75% for temperature up to 31°C decreasing linearly to 50% relative
humidity at 40°C.
Supply voltage fluctuations: Not to exceed ±10% of the normal voltage.
9
3. ASSEMBLING THE MICROSCOPE
3.1 Input voltage
The automatic voltage selection works with a broad range of settings. However, always use a
power cord that is rated for the voltage used in your area and that has been approved to meet local
safety standards. Using the wrong power cord could cause fire or equipment damage.
In case of using the extension cord, use only a power supply cord with a protective earth (PE) wire.
In order to prevent electric shock, always turn the power switch on the power supply off before
connecting the power cord.
Illumination
Halogen: 12V/ 50W
3.2 Illumination (halogen lamp)
The quartz halogen lamp, used as a light source, has higher luminance and color temperature
than
conventional tungsten lamps. The luminance is approximately four times greater.
As long as the lamp voltage is kept constant, the halogen lamp maintains the same level of
brightness and color temperature regardless of whether it is new or nearing the end of its life.
3.3 Focusing block
Focusing block is assembled on pole of the stand, and it could be fixed at any position by the
lock screw.
The fixture dimension for focusing block is Ø32mm.
Movement range for focusing block is 30mm.
3.4 Stand
Stand has a pole whose height is 300mm and diaMeter is Ø32mm.
Adjustor on the pole could prevent focusing block from sliding down.
3.5 Mechanical Stage
Mechanical stage is assembled on the stand.
3.6 Objectives
Lower the stage completely. Screw the objectives into the revolving nosepiece so that clockwise
rotation of the nosepiece brings the next higher magnification objective into position.
Table des matières
Autres manuels Motic Microscope
Motic
Motic BA310 Pol Manuel utilisateur
Motic
Motic BA210E Manuel utilisateur
Motic
Motic SMZ-171 Series Manuel utilisateur
Motic
Motic SMZ-161 Series Manuel utilisateur
Motic
Motic S-10 Series Manuel utilisateur
Motic
Motic SWIFTLINE SM100 Series Manuel utilisateur
Motic
Motic DSK Series Manuel utilisateur
Motic
Motic BA410 Series Manuel utilisateur
Motic
Motic SILVER30 Series Manuel utilisateur
Motic
Motic BA310Met Manuel utilisateur
Motic
Motic SFC-3 Series Manuel utilisateur
Motic
Motic AE2000MET Manuel utilisateur
Motic
Motic SMZ-140 Manuel utilisateur
Motic
Motic B1 Series Manuel utilisateur
Motic
Motic AE20 Manuel utilisateur
Motic
Motic 1100401200572 Manuel utilisateur
Motic
Motic SMZ168 Series Manuel utilisateur
Motic
Motic B3 Series Manuel utilisateur
Motic
Motic GM-161 Series Manuel utilisateur
Motic
Motic B1-211 Manuel utilisateur
