Q: Why do I need the build platform calibration?
A: This is to ensure the platform surface is as parallel as possible with respect to the vat bottom, which is
important to the first layer formation. If performed improperly, the first layer might not adhere to the
platform, leading to failed prints.
Q: How often do I need to repeat this process?
A: When you use the same build platform and vat, you can keep the current calibration for a day or two,
but re-calibration can be done quickly.
Q: Can I check how well the calibration is done visually?
A: You can remove the front cover and see the vat bottom. If the calibration is done properly, there is very
little resin between the platform and the vat, so you can see the aluminum plate through the glass
bottom.
9
Troubleshooting
