- iv -
CHAPTER 4 How to Set Functions
Basic operations of menus ................................................................... 4.2
Registering a type ................................................................................ 4.4
Changing the type ..................................................................................... 4.4
Setup functions .................................................................................... 4.5
Change the display language [DISPLAY]............................................. 4.8
CHAPTER 5 Maintenance
Maintenance of the machine ................................................................ 5.2
Setting the maintenance function .............................................................. 5.2
Maintenance setup functions .................................................................... 5.3
Printing setup conditions [LIST] ........................................................... 5.4
Printing HEX CODE [DATA DUMP] ...................................................... 5.5
When medium thickness is changed [Print Adjust] .............................. 5.6
Cleaning the station interior [Station]-[Carriage Out] ........................... 5.8
When the message [Replace Wiper] is displayed
[Station]-[Wiper Exchng] ...................................................................... 5.9
Fill up the ink [Ink Filling]................................................................... 5.11
Charging ink different from the one in use [Ink Change] .................... 5.12
Displaying the firmware version [INFORMATION] ............................. 5.14
Specifying the print head line [Use Head] .......................................... 5.15
Execute the flushing and cleaning regularly [Routine Control] .......... 5.16
CHAPTER 6 When Abnormal Conditions Are Encountered
Abnormal conditions where no error massage appears ...................... 6.2
The machine cannot be energized ............................................................ 6.2
The machine cannot perform printing ....................................................... 6.2
If image quality declines ....................................................................... 6.3
While lines/thin spots are obvious or dark stripes occur
(In the direction of travel of the head) ....................................................... 6.3
Characters fluctuate doubly or triply into paper feed................................. 6.3
Displacement is observed between outward and inward printing
/The respective color ink injected by the respective color heads do not prop-
erly overlap.................................................................................................6.3
Large ink drop on medium ........................................................................ 6.3
Become lighter during the printing and then printing without ink............... 6.3
Some strip streaks occur on the image with narrow print width ................ 6.3
Problems where error messages are given on the LCD ...................... 6.4
Errors accompanied by warnings .............................................................. 6.4
Error messages ..........................................................................................6.7
