Milwaukee MR100ATC Manuel utilisateur

MR100ATC - Salinity Refractometer

Specifications

Scale Range Resolution

Parts Per Thousand 0 to 100 0/00 1 0/00

Specific Gravity 1.000 to 1.070

Dimensions 7.6 x 1.5 x 1.5" (194 x 38 x 38mm)

Weight Approx. 8.0 oz. (227g)

Shadow-line Æ

Operation

The instrument measures the refractive index of the sample and displays the result in parts

per thousand ( 0/00 ) and specific gravity.

1. Zero Adjustment

Put distilled water on the prism; enough to cover the entire prism. Close the cover plate and rotate

the adjusting screw so that the light/dark boundary line (known as the shadow-line) evens up with

the zero line. After the zero adjustment, clean the prism with soft cloth.

2. Sample Preparation and Reading

To take a reading, place a few drops of a sample liquid on the measurement prism. Ensure that

enough solution is added to the prism in order to cover the entire prism. Close the prism so that

the liquid spreads across the entire surface of the prism without air bubbles or dry spots (see

diagrams below). Allow the sample to remain on the prism for approximately 30 seconds. While

holding the instrument under a light source, look through the eyepiece. The salinity concentration

is determined by the intersection of the boundary of the light and dark fields (known as the

shadow-line) on the printed scale. The left side of the scale indicates the specific gravity and the

right side parts per thousand. If the scale appears out of focus, the eyepiece may be adjusted by

rotating the knurled portion. The instrument also features an eye guard to prevent stray light from

entering the eyepiece and causing reflections. It may be necessary to adjust the position of the

light source to maximize the contrast of the shadow-line. Under normal conditions, optimal

contrast is obtained by holding the instrument underneath and perpendicular to a light source.

(florescent light is not recommended) - Once a reading has been taken, wipe dry with a clean

cloth (do not wash or rinse) and place the instrument in the supplied plastic case. Store the

instrument in a safe, dry environment.

Temperature is the single most important factor influencing refractometer readings and is one of

the largest sources of measurement error. However, this device incorporates automatic

temperature compensation (ATC) and the concern for temperature fluctuations in sample

liquids is alleviated. When ambient temperature varies from 68°F (20°C), readings are

automatically adjusted to compensate for temperature variance between 50°F to 86°F (10°C to

30°C).

Liquid on lens display

Milwaukee Instruments

2950 Business Park Drive

Rocky Mount, NC 27804

Ph # 252-443-3630 e-mail sales@milwaukeetesters.com

www.milwaukeetesters.com

Table des matières

Autres manuels Milwaukee Instrument de mesure

Milwaukee

Milwaukee MI407 Manuel utilisateur

Milwaukee

Milwaukee MI805 Manuel utilisateur

Milwaukee

Milwaukee MI 405 Manuel utilisateur

Milwaukee

Milwaukee HEAVY DUTY M12 PL Manuel utilisateur

Milwaukee

Milwaukee MI405 Manuel utilisateur

Milwaukee

Milwaukee 2212-20 Manuel utilisateur

Milwaukee

Milwaukee MW11 Manuel utilisateur

Milwaukee

Milwaukee LDM 80 Manuel utilisateur

Milwaukee

Milwaukee pH51 Manuel utilisateur

Milwaukee

Milwaukee M12 CPL Manuel utilisateur

Milwaukee

Milwaukee MW102 Manuel utilisateur

Milwaukee

Milwaukee MW13 Manuel utilisateur

Milwaukee

Milwaukee PRO MI414 Manuel utilisateur

Milwaukee

Milwaukee EC40 Manuel utilisateur

Milwaukee

Milwaukee MI455 Manuel utilisateur

Milwaukee

Milwaukee 48-22-5112 Manuel utilisateur

Milwaukee

Milwaukee Smart PH Meter Manuel utilisateur

Milwaukee

Milwaukee REDSTICK MLDIG14 Manuel utilisateur

Milwaukee

Milwaukee MW500 Manuel utilisateur

Milwaukee

Milwaukee C65 Manuel utilisateur

Milwaukee

Milwaukee MI 411 Manuel utilisateur

Milwaukee

Milwaukee MW180 MAX Manuel utilisateur

Milwaukee

Milwaukee MW12 Manuel utilisateur

Milwaukee

Milwaukee CALIBRATION 2238-20 Mode d'emploi

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur