MiLAN MIL-S1600 Manuel utilisateur

MIL-S1600

16 port Ethernet 10/100 Mbps Switch

User’s Guide

With optional 100FX Modules ---

SC, ST, MTRJ and VF-45 connectors

Regulatory Approval

- FCC Class A

- UL 1950

- CSA C22.2 No. 950

- EN60950

- CE - EN55022 Class A

- EN55024

Canadian EMI Notice

This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment

Regulations.

Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du

Canada.

European Notice

Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive

(73/23/EEC) issued by the Commission of the European Community Compliance with these directives imply

conformity to the following European Norms:

- EN55022 (CISPR 22) - Radio Frequency Interference

-EN61000-X - Electromagnetic Immunity

-EN60950 (IEC950) - Product Safety

Five-Year Limited Warranty

MiLAN Technology warrants to the original consumer or purchaser that each of it's products, and

all components thereof, will be free from defects in material and/or workmanship for a

period of five years from the original factory shipment date. Any warranty hereunder is

extended to theoriginal consumer or purchaser and is not assignable.

MiLAN Technology makes no express or implied warranties including, but not limited to, any

implied warranty of merchantability or fitness for a particular purpose, except as expressly set

forth in this warranty. In no event shall MiLAN Technology be liable for incidental or

consequential damages, costs, or expenses arising out of or in connection with the

performance of the product delivered hereunder. MiLAN Technology will in no case cover damages

arising out of the product being used in a negligent fashion or manner.

Trademarks

trademarks of Digi International, Inc. in the United States and/or other countries. All other

trademarks are the property of their respective holders.

To Contact MiLAN Technology

For prompt response when calling for service information, have the following information ready:

- Product serial number and revision

- Date of purchase

- Vendor or place of purchase

You can reach MiLAN Technology technical support at:

E-mail: [email protected]

Telephone: +1.408.744.2751

Fax: +1.408.744.2771

MiLAN Technology

1299 Orleans Drive

Sunnyvale, CA 94089-1138

United States of America

Telephone: +1.408.744.2775

Fax: +1.408.744.2793

http://www.milan.com

info @ milan.com

P/N 90000386_A

Contents

1. Introduction…….…………….…………….……….…… 1

Features …………………………………………..…..…….……..2

Package Contents ………………………..…..……….………... .3

2. Hardware Description ………………..….…..…...…… 4

Front Panel ………………………………………...…...………… 4

LED Indicators …………………………………………………… 5

Real Panel …………………………………………….………….. 6

Desktop Installation ……………………….…….……………….. 6

Rack-mounted Installation …...…………….…………………… 7

3. Optional Fiber Modules ……………..……….……… 9

Front Panel …………………………………...…...….….…..… 10

Features/ Specifications …………….………………..….……. 11

Installing 100FX Module ………………………………………. 12

4. Network Application .………………………………… 13

Small Workgroup ………………………………….......……..… 13

Segment Bridge …………….……………..…………..….……. 14

VLAN Application …………………….…………………………. 15

5. Network Configuration .……………..……………..….. 16

Connecting a Terminal or PC to the Console port ...………… 17

Port Setup …………………………..………….. 18

SPEED/Duplex Setup ………………………….…...………… 19

VLAN Setup ……………………………………………...……… 20

Trunk Setup ……………………………………………...…… 21

6. Technical Specification .………………………....….. 23

Introduction

The MIL-S1600 is a 16 port 10/100Base-TX switch that can be used to

build high-performance switched networks. The store-and-forward

architecture offers low latency for high-speed networking for workgroups

or departments in any business.

Figure 1-1. The MIL-S1600 switch

The MIL-S1600 has 16 auto-sensing 10/100Base-TX Ethernet RJ-45

ports plus one extension slot for an optional one port 100Base-FX fiber

module enabling long-distance connectivity. The optional fiber modules

support single mode and multi-mode connectors to provide a way to

connect remote sites up to 2 Km (multi-mode) or 15 to 60Km (single-

mode). Automatic MDI/MDIX enables connection to another switch or

workstation without changing cabling.

The MIL-S1600 is basically an unmanaged switch but it does supports a

few basic management functions using the console port. The switch does

not support SNMP or an IP address. The console management functions

include trunking, VLANs and port configuration.

Features

•Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet Standards

•Auto-negotiation for the 10/100Base-TX ports

•Automatic MDI/MDIX crossover for each 10Base-T/ 100Base-TX port

•One Extension Slot for 100Mbps Fiber

•Backpressure for Half-duplex mode, and Flow control for Full-duplex

•Store-and-forward switching architecture

•8K-entry MAC address table and automatic address learning

•4M memory buffer sharing

•Console port for limited management support

•Non-blocking full wire speed at 3.6 Gbps

•LED-indicators for power, trunking, speed, activity, duplex

•Standard 19-inch Rackmount size, 1 Ru high

Package Contents

Unpack the contents of the MIL-S1600 and verify them against the

checklist below.

nMIL-S1600 Switch

nPower Cord

nFour Rubber Feet

nConsole Cable

nUser Guide

nRack Mount Ears

If any item list above is missing or damaged, please contact your local dealer

for service.

Figure 1-2. Package Contents

Hardware Description

Front Panel

The Front Panel of the MIL-S1600 consists of 16 auto-sensing 10/100Base-

TX Ethernet RJ-45 ports, a console port, and an extension slot for a 100Base-

FX Fiber Module. The LED Indicators are also located on the front panel of

the switch.

Figure 2-1. The Front panel of the MIL-S1600

Note : MDI/MDIX allows you to connect to another switch or workstation

without regard to cabling type.

Console Port: The limited management functions are configured

through the Console Port. It requires a direct connection between the

switch and a PC with the provided console cable.

100FX Module ( Optional ) : There are 5 types of one port

100Mbps Fiber Modules available for the MIL-S1600. The connectors for

the 100FX Module are SC, ST, MT-RJ, VF-45 for multi-mode and SC in

single-mode. Using multi-mode fiber cabling the network can be extended

up to 2 kilometers. The distance for extending the network with single-

mode fiber cabling is 15 to 60 kilometers. For more information see

Section 3 on Optional Modules.

LED Indicators

The LED Indicators give real-time information on operational status. The

following table provides descriptions

of LED status and their meaning.

Figure 2-2. LED indicators

LED Status Description

Green Power On

Power Off Power is not connected

Green This switch is trunking into another MIL-S1600, MIL-SM801 or

MIL-SM800 switch

Trunking

Off No trunking, which is the default

Green The port is operating at the speed of 100Mbps

100M Off No device attached or in 10Mbps mode

Green The port has link established with a device

Blinks The port is receiving or transmitting data

LK/ACT

Off No device attached.

Yellow The port is operating in Full-duplex mode.

Blinks A collision is occurring on the port.

FD/COL

Off No device attached or in half-duplex mode

Table 2-1. Description of LED Indicators

Rear Panel

The 3-pronged power plug is located at the rear panel of the MIL-S1600

as shown in Figure 2-2. The switch has autosensing power in the range

of 100-240V AC, 50-60Hz.

Figure 2-2. The Rear Panel

Desktop Installation

Set the switch on a sufficiently large flat space with a power outlet

nearby. The surface where you put your switch should be clean, smooth,

level and sturdy.

Make sure there is enough clearance around the switch to allow

attachment of cables, power cord and to allow air circulation.

Attaching Rubber Feet

A. Make sure mounting surface on the bottom of the switch is grease

and dust free.

B. Remove adhesive backing from the rubber feet.

C. Apply the rubber feet to each corner on the bottom of the switch.

These footpads can prevent the switch from being affected by shock

or vibration.

Figure 2-4. Attaching Rubber Feet to each corner on the bottom of the switch

Rack-mounted Installation

A rack-mounting kit is provided with the MIL-S1600 and the switch can be

mounted in an EIA standard size 19-inch rack allowing it to be placed in a

wiring closet.

Perform the following steps to rack mount the switch:

A. Position one bracket to align with the holes on one side of the switch and

secure it with the smaller bracket screws. Then attach the remaining

bracket to the other side of the switch.

Figure 2-5. Attach mounting brackets with screws

B. After attaching both mounting brackets, position the MIL-S1600 in the rack

by lining up the holes in the brackets with the appropriate holes on the

rack. Secure the switch to the rack using rack-mounting screws.

Autres manuels pour MIL-S1600

Table des matières

Autres manuels MiLAN Changer

MiLAN

MiLAN MIL-SM2401M-STK Manuel utilisateur

MiLAN

MiLAN MIL-S3580 Manuel utilisateur

MiLAN

MiLAN MicroHub LE MIL-4000H Manuel utilisateur

MiLAN

MiLAN MIL-SM801P Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

MiLAN

MiLAN MIL-SM4004TG Manuel utilisateur

MiLAN

MiLAN MIL-S3570 Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Mode d’emploi

MiLAN

MiLAN MIL-SM802GAF Manuel utilisateur

MiLAN

MiLAN MIL-S800I Manuel utilisateur

MiLAN

MiLAN MIL-S800 Manuel utilisateur

MiLAN

MiLAN MIL-SM8002TG Manuel utilisateur

MiLAN

MiLAN MIL-SM24T4DPA Manuel de programmation

MiLAN

MiLAN MIL-SM24004TG Manuel utilisateur

MiLAN

MiLAN mil-s2400s Manuel utilisateur

MiLAN

MiLAN MIL-H1120 Manuel utilisateur

MiLAN

MiLAN MIL-S500 Manuel utilisateur

MiLAN

MiLAN MIL-SM4804G Manuel utilisateur

MiLAN

MiLAN MIL-S8000G Manuel utilisateur

MiLAN

MiLAN MIL-S2612 Manuel utilisateur

MiLAN

MiLAN MIL-S24000T Manuel utilisateur

MiLAN

MiLAN MIL-SM801 Manuel utilisateur

MiLAN

MiLAN MIL-S16000T Manuel utilisateur

MiLAN

MiLAN MIL-S24002TGXX Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur