MiLAN MIL-SM8002TG Manuel utilisateur

Rev.A

09-MAY2006

MIL-SM8002TG

9 Port 10/100/1000BASE-T

Two Combo 1000BASE-X SFP

Ports

Advanced Managed Switch

Quick Installation Guide

Content

Introduction............................................................................................................. 1

Package Contents .............................................................................................................1

Hardware Description............................................................................................. 2

Physical Dimension ...........................................................................................................2

Desktop Installation ...........................................................................................................2

Power On...........................................................................................................................2

Initial Setup ............................................................................................................. 3

Login in the Console Interface ...........................................................................................3

IP/Subnet/Gateway Setup .................................................................................................4

Introduction

The product is a multi-port switch that can be used to build high-performance switched

indoor or protected outdoor networks. It provides wire-speed, Gigabit Ethernet switching

function that allows high-performance, low-cost connection. The Switch features a

store-and-forward switching and it can automatically learn and store source address in an

8K-entry MAC address table.

Package Contents

Unpack the contents of the switch and verify them against the checklist below.

Managed Switch unit

Power Cord

Four Rubber Feet

RS-232 cable

User Manual

If any item is missing or damaged, please contact your local dealer for service.

Hardware Description

Physical Dimension

The physical dimensions of the switch is 217mm(W) x 140mm(D) x 43mm(H)

Desktop Installation

Mount the switch on a desired space by either using wallmount brackets of rubber feet.

Make sure there is enough clearance around the Switch to allow attachment of cables,

power cord and air circulation.

Power On

Connect the power cord to the power socket on the rear panel of the Switch. The other

side of power cord connects to the power outlet. The internal power works with AC in the

voltage range 90-240VAC, frequency 50~60Hz. Check the power indicator on the front

panel to see if power is properly supplied.

Initial Setup

Use serial cable provided in the package to pre-configure the IP settings. When the

connection between Switch and PC is ready, turn on the PC and run a terminal emulation

program or Hyper Terminal and configure its communication parameters to match the

following default characteristics of the console port:

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bit: 1

Flow control: None

The settings of communication parameters

After finished the parameter settings, click “OK“. When the blank screen shows up, press

Enter key to bring out the login prompt. Key in the “root“(default value) for the both User

name and Password (use Enter key to switch), then press Enter key and the Main Menu

of console management appears. Please see below figure for login screen.

Console login interface

IP/Subnet/Gateway Setup

MIL-SM8002TG is shipped with a default IP of 192.168.1.77. In order to set up a customer

specific IP/Subnet/Gateway Use Main menu – Type: “menu” – Select System

Configuration – IP Configuration

In the IP configuration window please choose the following:

1. DHCP: disable or enable the DHCP client function. When DHCP function is enabled

you don’t need to assign the IP address and subnet mask. The system will be

assigned the IP address from the local DHCP server.

2. IP Address: assign the switch IP address. The default IP is 192.168.16.1.

3. Subnet Mask: assign the switch IP subnet mask.

4. Gateway: assign the switch gateway. The default value is 192.168.16.254.

5. DNS1: Optionally set up Domain Name Server

6. DNS2: Optionally set up a backup for DNS1. When the DNS1 cannot function, the

DNS2 can replace DNS1 immediately.

7. Select <Save> action to save the configuration.

[NOTE] Always restart the switch after finished the setup.

Continue with web-based management for additional setup.

6475 City West Pkwy

Eden Prairie, MN 55344

Tel.: +1.952.941.7600

techsupport@transition.com

Table des matières

Autres manuels MiLAN Changer

MiLAN

MiLAN MIL-S1600 Manuel utilisateur

MiLAN

MiLAN MIL-SM24004TG Manuel utilisateur

MiLAN

MiLAN MIL-S16002TG Series Manuel utilisateur

MiLAN

MiLAN MIL-SM802GAF Manuel utilisateur

MiLAN

MiLAN MIL-SM801P Manuel utilisateur

MiLAN

MiLAN MIL-SM24T4DPA Manuel de programmation

MiLAN

MiLAN MicroHub LE MIL-4000H Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M-STK Manuel utilisateur

MiLAN

MiLAN MIL-S5000T Manuel utilisateur

MiLAN

MiLAN MIL-S24002TGXX Manuel utilisateur

MiLAN

MiLAN MIL-S24002TGXX Manuel utilisateur

MiLAN

MiLAN MIL-S24T2GPA Manuel utilisateur

MiLAN

MiLAN MIL-SME801GSX Manuel utilisateur

MiLAN

MiLAN MIL-SM8TAF1GPA Manuel de programmation

MiLAN

MiLAN MIL-S3580 Manuel utilisateur

MiLAN

MiLAN MIL-SM808G Manuel utilisateur

MiLAN

MiLAN MIL-S501MT-15 Manuel utilisateur

MiLAN

MiLAN MIL-SM24004TG Manuel utilisateur

MiLAN

MiLAN MIL-SM4004TG Manuel utilisateur

MiLAN

MiLAN MIL-S2612 Manuel utilisateur

MiLAN

MiLAN MIL-S8TA Manuel utilisateur

MiLAN

MiLAN MIL-S500 Manuel utilisateur

MiLAN

MiLAN TR-TP-HB-1600 Manuel utilisateur

MiLAN

MiLAN MIL-S3570 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur