MicroNet SP6008P Manuel utilisateur

Communicate via

P/N 2300-0622

Quick Installation Guide

Model No.: SP6008P

8-Port 10/100M

PoE Switch

Specifications

SP6008PModel No.

IEEE 802.3af

IEEE 802.3 10 BaseT

IEEE 802.3u 100 BaseTX

IEEE 802.3x Flow Control

Number of Ports: 8 PoE/PSE ports

MAC Address: 1k

Buffer Memory: 512 bits

Transmission Method: Store and Forward

100Mbps port-148,800pps

10Mbps port-14,880pps

10 BaseT Cat 3,4,5 UTP/STP

100M BaseTx CAT 5 UTP/STP

Per Port: Link/Act, PoE Act/Status

Per Unit: Power

Input: 100~240V/AC, 50~60 Hz

Output: 48V/DC Per Port Output- 15.4W

Max Per Port, 8 Ports at Full 15.4 W Output Supported

130 Watts (Max)

20(H) x 58(W) x 87(D) mm

Operating: 0~60oC, Storage: -20~90oC

Operating: 10~90% (Non-Condensing)

Standards

Features

Filtering/

Forwarding

Rates

Transmission

Media

LED

Indicators

Power

Input/Output

Power

Consumption

Dimension

Temperature

Humidity

FCC Certifications

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and

radiates radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to

correct the interference at own expense. This device complies with

Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received; including

interference that may cause undesired operation.

CE Mark Warning

This equipment complies with the requirements relating to

electromagnetic compatibility of the essential protection requirement

of Council Directive 89/336/EEC on the approximation of the laws of

the Member States. Company has an on-going policy of upgrading

its products and it may be possible that information in this document

is not up-to-date. Please check with your local distributors for the

latest information. No part of this document can be copied or

reproduced in any form without written consent from the company.

WEEE Directive & Product Disposal

At the end its serviceable life ,this product should not be treated

as household or general waste. It should be handed over to the

applicable collection point for the recycling of electrical and

electronic equipment, or returned to the supplier for disposal.

www.micronet.com.tw ; www.micronet.info

Tour of the System

Front Panel

Back Panel

LED indicators

For definitions of LED indicators, please refer to the following table:

Introduction

Micronet SP6008P supports IEEE 802.3af at standard for Power

over Ethernet (PoE) with the maximum power delivery up to 130

Watts. That makes it suitable to various applications that demand

for remote power feeding and meet high level requirement for

power. SP6008P is totally equipped with 15.4 Watts per PoE port,

which effectively helps allocate power for connected multiple

devices and enhances network management.

Micronet SP6008P supports IEEE 802.3af at standard for Power

over Ethernet (PoE) with the maximum power delivery up to 130

Watts. That makes it suitable to various applications that demand

for remote power feeding and meet high level requirement for power.

SP6008P is totally equipped with 15.4 Watts per PoE port, which

effectively helps allocate power for connected multiple devices and

enhances network management.

Key Features

Compliant with IEEE 802.3af standard

Supports Power over Ethernet on 8 RJ-45 ports of 10/100M

Provides 130W (max) feeding power to 8 PDs: 15.4W for each

Supports Auto-MDI/MDI-X

Support Non-Blocking Data Forward

Supports Auto-Negotiation and feature of store-and-forward

LED indicators for PoE activity

Package Contents

Before you start installing SP6008P, please verify the following

package contents:

SP6008P 10/100M PoE Switch

Quick Installation Guide

Power Cord

Mounting Kits

1 2

LED Status

PWR

10/100M, LINK

PoE

Indication

On/Green

Off

On/Green

Blink/Green

Off

On/Orange

Off

Power is On

Power is off

The Ethernet port is connecting with

the device

Receiving or transmitting data

No device attached

PoE port is active

PoE port is not active

Power Switch and Power Cord Connector

Hardware Installation

Note: Port 1 to Port 8 are used for connecting to PD or PoE splitter

for end devices.

Note:

Network Speed Cable Type

10M

100M

Max. Length

Cat. 3,4,5,5e UTP/STP

Cat. 5,5e UTP/STP

100 meters

Step 1: Connect the Power Cord to SP6008P and then to a power

outlet

Step 2: Connect a RJ-45 Ethernet cable from IEEE802.3af-

compliant devices (PD) to an available PoE port of

SP6008P

Step 1:

Note: To prevent costly equipment damage and downtime, please

consider installing a surge suppression device or a UPS

(Un-interrupted Power Supply).

Note:

For cable selection, refer to the following table:

The setup of the switch can be performed using the following steps:

Autres manuels MicroNet Changer

MicroNet

MicroNet SP659B Manuel utilisateur

MicroNet

MicroNet SP508B Manuel utilisateur

MicroNet

MicroNet EtherFast SP624EA Manuel utilisateur

MicroNet

MicroNet SP6510P Manuel utilisateur

MicroNet

MicroNet SP616R Manuel utilisateur

MicroNet

MicroNet SP6824P Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

MicroNet

MicroNet SP3524A Manuel utilisateur

MicroNet

MicroNet SP659C Manuel utilisateur

MicroNet

MicroNet SP6510P8 Manuel utilisateur

MicroNet

MicroNet SP212E Manuel utilisateur

MicroNet

MicroNet SP616DB Manuel utilisateur

MicroNet

MicroNet SP218D Manuel utilisateur

MicroNet

MicroNet SP684C Manuel utilisateur

MicroNet

MicroNet SP6005P4 Manuel utilisateur

MicroNet

MicroNet SP698A Manuel utilisateur

MicroNet

MicroNet SP212E Manuel utilisateur

MicroNet

MicroNet SP6008PWS Manuel utilisateur

MicroNet

MicroNet SP212D Manuel utilisateur

MicroNet

MicroNet SP6524PWS Manuel utilisateur

MicroNet

MicroNet SP6008P Manuel utilisateur

MicroNet

MicroNet SP6008P Manuel utilisateur

MicroNet

MicroNet SP6108WS Manuel utilisateur

MicroNet

MicroNet SP1684B Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur