Microchip Technology TA100 Manuel utilisateur
AC164167
TA100 8-Pin SOIC Socket Board User Guide
Introduction
The TA100 8-pin SOIC mikroBUS™ compatible socket board has been developed for use with any of Microchip’s
microcontroller boards that support a MikroElektronika mikroBUS interface. The board’s dimensions match the
medium-sized add-on board as defined in the mikroBUS specification. Through use of an adapter board, the socket
board can also be used with Microchip microcontroller development boards that support an Xplained Pro Interface.
The TA100 secure elements are one-time-programmable devices. Having a socket board allows for a customer to
reuse the board with multiple TA100 sample devices for a given application or for multiple different applications. The
8-pin SOIC socket board is capable of being used with both the I2C and SPI interface versions of the TA100 device.
Figure 1. TA100 8-Pin SOIC Socket Board
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 1
Table of Contents
Introduction.....................................................................................................................................................1
1. Hardware Description..............................................................................................................................3
1.1. Schematic and Key Features....................................................................................................... 3
1.2. Board Configuration..................................................................................................................... 3
1.3. Supply Current Measurement...................................................................................................... 4
1.4. Hardware Documentation.............................................................................................................4
2. Connecting the Board............................................................................................................................. 6
2.1. Xplained Pro Connections............................................................................................................6
2.2. Microchip Explorer 16/32 Connections.........................................................................................8
2.3. Automotive Networking Development Board Connections...........................................................8
3. Software Tools.......................................................................................................................................10
3.1. myMicrochip............................................................................................................................... 11
4. Revision History.................................................................................................................................... 13
The Microchip Website.................................................................................................................................14
Product Change Notification Service............................................................................................................14
Customer Support........................................................................................................................................ 14
Microchip Devices Code Protection Feature................................................................................................ 14
Legal Notice................................................................................................................................................. 14
Trademarks.................................................................................................................................................. 15
Quality Management System....................................................................................................................... 15
Worldwide Sales and Service.......................................................................................................................16
AC164167
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 2
1. Hardware Description
1.1 Schematic and Key Features
• One 8-Pin SOIC Socket (U1)
• One mikroBUS Connector (J1, J2)
• Five Selection Jumpers for selecting either an I2C or SPI Interface (J3 to J7)
• On-Board 4.7 kΩ I2C Resistors (R2, R3)
• On-Board LED Power Indicator (LD1)
• Power Jumper for selecting 3.3V or 5V power (J3)
• Optional GPIO Header (J9) Not populated
Figure 1-1. TA100 8-Pin SOIC Socket Board Schematic
1.2 Board Configuration
TA100 8-Pin SOIC Socket Board Jumper Configurations
• SPI Connections: J3, J4, J5, J6 and J7 in position closest to socket (white band labeled with SPI)(1)
• I2C Connections: J3, J4, J5, J6 and J7 in position furthest from socket (white band labeled with I2C)(1)
• 3.3V Power: J10 with shunt across 3V3 and PWR positions(2)
• 5.0V Power: J10 with shunt across 5V and PWR positions(2)
Notes:
1. Jumpers J3, J4, J5, J6 and J7 must all be set with position pins 1 and 2 shorted (SPI) or all set with position
pins 2 and 3 shorted (I2C) for proper operation in a given interface mode.
2. The I/O levels of the GPIO, SPI and I2C signals will track with the supply voltage.
AC164167
Hardware Description
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 3
SPI Configuration I2C Configuration
1.3 Supply Current Measurement
The current consumption of the TA100 device can be measured by using the AC164167 8-pin socket board. The only
devices on the board that will consume power are the TA100 socketed device, the Power LED and the I2C pull-up
resistors. Follow these steps to measure the current:
1. Modify the board to remove the resistor R1 which is in series with the LED. This will remove the current
through the LED from the total measured current.(1)
2. Install the TA100 device into the socket.
3. Install the socket board into the host system with the appropriate power settings.
4. Select either 3.3V or 5V power for the measurement.(2)
5. Connect the high side of the ammeter to the 3.3V or 5V supply.
6. Connect the low side of the ammeter to the common PWR signal of the header.
7. Current measurements can now be taken by running various TA100 commands and measuring the current. (3)
Notes:
1. For lower accuracy current measurements this resistor may be kept in the circuit. A separate measurement of
the current through just the LED path should be made prior to measuring the TA100 device currents. This
value can then be subtracted from the total current measured.
2. The host board provides the power to the mikroBUS extension board so whichever supply is selected must
match the capabilities and setting used on the host board.
3. When measuring the current of I2C devices, the measurement will include the I2C pull-up currents used to pull
up the bus. For SPI signals the pull-ups are internal to the device and will also factor into the total current
consumed.
1.4 Hardware Documentation
Additional documentation for the kit can be found on the Microchip Website for the AC164167.
AC164167
Hardware Description
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 4
This includes:
1. Board Design Documentation including Schematics and 3D Views.
2. Gerber Files.
3. TA100 8-Pin SOIC Socket Board User Guide (AC164167).
For other kits referenced in this document please check website information associated with those kits. This includes:
1. ATSAMV71-XULT SAMV71 Xplained Ultra Evaluation Kit.
2. ATMBUSADAPTER-XPRO XPRO to mikroBUS Adapter.
3. Explorer 16/32 Development Kit (DM240001-2).
4. dsPIC33CK 16-Bit PIC® Microcontroller.
Related Hardware Kits
Microchip also offers the AC164166 14-Pin SOIC Socket Kit for the TA100. This developers kit offers a single TA100
device with both a SPI and I2C Interface.
AC164167
Hardware Description
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 5
2. Connecting the Board
The form factor of the AC164167 development board was chosen because Microchip has heavily adopted the use of
the mikroBUS connector on host boards. Many of Microchip’s development platforms will support one or more
mikroBUS interfaces. These include:
• Microchip Explorer 16/32 Development Board
• MPLAB® Xpress Evaluation Board
• Automotive Networking Development Board
• PIC® Curiosity Boards
• PIC Curiosity Nano Boards
• AVR® Curiosity Nano Boards
• SAM Xplained-Pro microcontroller development boards when used with an ATMBusAdapter
2.1 Xplained Pro Connections
By using an adapter board, the AC164167 development board can still be used with Microchip development boards
that only support the Xplained Pro interface. Figure 2-1 shows the full assembly of the AC164167 TA100 8-Pin SOIC
Socket Board , the ATMBUSADAPTER-XPRO and an ATSAMV71-XULT Development Board.
Figure 2-1. Connections to an Xplained Pro Development Platform
1
2
3
4
5
6
1. AC164167 8-Pin
Socket
Development Board.
2. ATMBUSADAPTER-
XPRO.
3. ATSAMV71-XULT
Development Board.
4. TARGET USB Port.
5. DEBUG USB Port.
6. External Power Jack
Input.
Powering the SAMV71-XULT Board
AC164167
Connecting the Board
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 6
Multiple options exist for powering the SAMV71-XULT Development Board. Depending on the total current
requirements different options are allowed. Please see the SAMV71-XULT User Guide for more information.
1. External Power Jack Input.
– 2.1 mm barrel connector
– 5-14V input supply Maximum current of 2.0A
– 12V 18W Power Adapter Option: Triad Magnetics WSU120-1500
2. Embedded Debugger USB Connection. Max. of 500 mA.
3. Target USB Connection. Max. of 500 mA.
4. External Power Header.
– 2-pin 100 mil Header
– Direct 5V Supply
– Max. 2A of current
ATMBUSAdapter Power Settings
The ATMBUSAdapter allows power to be connected to the MikroBus Host adapter either directly through the XPRO
interface or by providing external power through the EXT header. It is important that all jumpers are connected
correctly before connecting to the SAMV71-XULT or other boards with an XPRO interface in order to prevent possible
damage to the system.
Figure 2-2. ATMBUSAdapter Plus AC164167
B
A
C
1. Option 1: Direct Power from the XPRO Extension
– Determine if the XPRO Board outputs a 3.3V or 5.0V supply voltage.
– Connect the J10 shunt “C”of the AC164167 to the appropriate 3.3V or 5.0V supply.
– Connect the ATMBUSAdapter power shunt “A” to the same voltage as the XPRO Supply.
2. Option 2: External Power Connected to the ATMBUSAdapter.
– Remove the Power Shunt “A” from the ATMBUSAdapter. This disconnects power from the XPRO Header.
– Connect either 3.3V or 5.0V external power to the Ext Header “B” on the ATMBUSAdapter
– Make sure the J10 shunt on the AC164167 is placed across the correct connections for the External
Power Supply chosen.
Additional Resources
•SAMV71 Kit Information
•SAMV71- Xplained Ultra User Guide
•SAMV71 Microcontroller
• Additional Tools available via myMicrochip
AC164167
Connecting the Board
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 7
2.2 Microchip Explorer 16/32 Connections
The AC164167 extension board can be connected to any microcontroller board that contains a mikroBUS Host
Header. The 8-pin socket board can either be configured for the I2C or SPI interface as shown in section 1.2 Board
Configuration. The diagram below shows a configuration using the Microchip Explorer 16/32 Development Board and
the dsPIC33CK 16-bit microcontroller. Note that the Explorer 16/32 board allows for a variety of 100-pin Microchip
microcontrollers to be used.
Figure 2-3. Connections to a Microchip Explorer 16/32 Development Board
1
2
3
8
4
7
6
5
1. AC164167 14-Pin Socket
Development Board.
2. dsPIC33CK 16-Bit
Microcontroller.
3. Microchip Explorer 16/32-Bit
development Board.
4. External Power Connection.
5. Micro-USB Connection.
6. Type-A USB Connection.
7. USB Type-C™ Connection.
8. PICkit™ On-Board
debugger micro-USB
Connection.
Powering the Board
Multiple options exist for powering the Explorer 16/32 Development board. Depending on the total current
requirements different options are allowed.
1. External Power Supply Connection.
– 8-15V Power Supply maximum current 1.3A
– Universal 9V Supply Adapter: AC002014
2. USB Connections allow up to 400 mA.
Additional Resources
•Microchip Explorer 16/32 Kit Information
•Microchip Explore16/32 User Guide
•dsPIC33CK
• Additional software tools available via myMICROCHIP
2.3 Automotive Networking Development Board Connections
The AC164167 extension board can be connected to any microcontroller board that contains a mikroBUS Host
Header. The 8-pin socket board can either be configured for the I2C or SPI interface as shown in section 1.2 Board
Configuration. The diagram below shows the Automotive Networking Development Board. This board is a low-cost
modular development system for Microchip’s 8-bit, 16-bit, and 32-bit microcontrollers targeting CAN and LIN network
related applications.
AC164167
Connecting the Board
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 8
Due to the modular nature of the Automotive Networking Development Board only a generic photo of the board is
shown below. There are multiple LIN and CAN Controllers that can be connected through the mikroBUS connectors
along with the AC164167 socket security board. Each of these devices can be connected via any of the mikroBUS
headers. A 100-pin plug-in microcontroller module (PIM) is also required for complete system operation. Microchip
has a variety of PIM modules that can be used with this development board. Examples of mikroBUS click boards and
PIM modules are shown in the Additional Resources section.
Figure 2-4. Connections to the Automotive Networking Development Board
1
2
3
4
5
1. Automotive
Networking
Development
Board.
2. mikroBUS™
Host headers.
3. Microcontroller
PIM Socket.
4. External Power
Connection.
5. Micro-USB
Power/Signal
Connection.
Powering the Board
Multiple options exist for powering the Automotive Networking Development Board.
1. External Power Supply Connection (7-30V).
– 9V external power supply adapter: (AC002014) 1.3A current
– 5 mm output jack with center-positive connection
– Place jumper across pins 2-3 of header J28 to enable
2. USB Connections.
– Micro-USB connection
– Place jumper across pins 1-2 of header J28 to enable
Additional Resources
The following list of resources should be considered as examples and not an exhaustive list. To identify additional
PIM or mikroBUS modules that may work with the Automotive Networking Development Board please go to
www.microchip.com.
•Automotive Networking Development Board Kit Information
•Automotive Networking Development Board User’s Guide
•MCP2003B click for LIN systems
•MCP25625 click with Microchip CAN controller
•ATA6563 click with Microchip CAN controller
•PIC18F66K80 100-pin PIM
• Additional software tools available via myMicrochip
AC164167
Connecting the Board
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 9
3. Software Tools
The TA100 is supported by a suite of software tools. These tools are only available under NDA. Please contact
Microchip to obtain an NDA and request access to the tools. Once an NDA has been signed, these tools will be made
available in the My Secure Software section of the customer’s myMicrochip account. Enhancements, upgrades and
additional tools will automatically be made available to any customer that has been enabled for the TA100 support.
Table 3-1. TA100 Software Tools
Item # Tool Name Description
1 TA100 Configurator
GUI and TA100
Library
The TA100 Configurator GUI provides the ability to configure and pseudo-provision
TA100 devices and to illustrate how the TA100 can be used for various applications
such as Secure Boot, Device Authentication and CAN-MAC. These applications
perform many cryptographic operations using the TA100 library.
2 CryptoAuthLib A flexible library implemented with a Hardware Abstraction Layer (HAL) that allows
the TA100 to be readily ported to other microcontrollers. The library provides
commands support for the TA100 and other Microchip CryptoAuthentication™
devices significantly speeding up application development.
3 AUTOSAR™ 4.3.1
CRYPTO driver.(1)
CRYPTO driver specifications provides an abstraction layer to integrate external
cryptographic device such as the TA100 into the AUTOSAR™ stack. This allows for
code to be portable between various applications that use different
microcontrollers.
Important: (1) For projects that use the AUTOSAR Driver the AUTOSAR™ Reference Stack will also be
needed. AUTOSAR™ is an open and standardized automotive software architecture. The TA100 has been
integrated into 3rd party AUTOSAR™ software stacks to aid customers in the implementation of
automotive applications. Please contact Microchip for a list of 3rd Party AUTOSAR™ stack vendors that
support the TA100.
Use Case Examples
Use Case examples utilize the TA100 Configurator GUI to demonstrate various sample applications that can be
implemented using the TA100 and SAM V71 microcontroller. These sample applications come with the necessary
microcontroller firmware, detailed application user guide and other documentation describing the use case in more
detail. Table 3-2 provides some of the use case examples that are available from the myMicrochip website. Upgrades
to these use case examples and additional use case examples will be provided over time via the same path.
Table 3-2. Use Case Examples
Item # Use Case
Examples(1)
Description
1 Device Authentication Provides device authentication by verifying the chain of trust using Signer and
Device Certificates and a Random Challenge. Upon successful authentication, a
known string is encrypted and written to a data element or read and decrypted from
a data element inside TA100.
2 Full Stored Secure
Boot with Pre-Boot
Secure Boot use case that upon initial boot calculates the digest of the firmware
code and then stores it for faster subsequent secure boots.
3 CAN Bootloader Secure Boot Use case that allows for secure firmware upgrade via the CAN Bus
using the SAMV71 microcontroller, K2L MOCCA-FD tool and PC-based GUI.
AC164167
Software Tools
© 2020 Microchip Technology Inc. User Guide DS-20006366A-page 10
Table des matières
Autres manuels Microchip Technology Carte mère
Microchip Technology
Microchip Technology MCP1633 SEPIC Manuel utilisateur
Microchip Technology
Microchip Technology ATtiny3217 Xplained Pro Manuel utilisateur
Microchip Technology
Microchip Technology SAM E51 Curiosity Nano Manuel utilisateur
Microchip Technology
Microchip Technology EVB-LAN9252-SPI Manuel utilisateur
Microchip Technology
Microchip Technology MCP651 Manuel utilisateur
Microchip Technology
Microchip Technology SAMA5D3 XPLAINED Manuel utilisateur
Microchip Technology
Microchip Technology ATtiny817 Xplained Pro Manuel utilisateur
Microchip Technology
Microchip Technology CAP1 Series Manuel utilisateur
Microchip Technology
Microchip Technology ATtiny817 Xplained Pro Manuel utilisateur
Microchip Technology
Microchip Technology EVB-LAN7801 Manuel utilisateur
Microchip Technology
Microchip Technology WFI32-IoT Manuel utilisateur
Microchip Technology
Microchip Technology PIC16F15376 Curiosity Nano Manuel d'installation
Microchip Technology
Microchip Technology RN4870 Manuel utilisateur
Microchip Technology
Microchip Technology MIC23350 Manuel utilisateur
Microchip Technology
Microchip Technology SOT23-5 Manuel utilisateur
Microchip Technology
Microchip Technology MCP1643 Manuel utilisateur
Microchip Technology
Microchip Technology MCP1642B Manuel utilisateur
Microchip Technology
Microchip Technology PT100 RTD Manuel utilisateur
Microchip Technology
Microchip Technology ATtiny104 Xplained Nano Manuel utilisateur
Microchip Technology
Microchip Technology SAM D21 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
