Microchip Technology Microsemi CoaXPress VIDEO-DC-CXP Manuel technique

Kit Contents - VIDEO-DC-CXP

Quantity Description

1 CoaXPress device board with PolarFire FPGA with 100K LE MPF100T-1FCSG325I

1 CoaXPress host board

1 USB 2.0 A to Mini-B cable

1 FlashPro4

1 Coaxial HD-BNC to HD-BNC male-to-male cable

1 Quickstart card

CoaXPress FMC Quickstart Card

Overview

Microchip’s CoaXPress offering is a three-board solution that demonstrates high-speed transmission of

high-resolution image data from a device to the host. It supports a 12.5G CoaXPress PHY and includes

ready to use reference designs for quick prototyping.

Microchip’s CoaXPress FMC daughter card is a hardware evaluation platform for evaluating and testing

the CoaXPress protocol. The daughter card works with the PolarFire Video Kit (MPF300-VIDEO-KIT-NS)

features the PolarFire FPGA device. This kit needs to be purchased separately. The kit is designed for

effortless prototyping of popular imaging and video protocols including MIPI CSI-2 TX, MIPI CSI-2 RX,

HDMI 1.4 TX, HDMI 2.0, DSI, and HD/3G/6G/12G SDI. With a 300K logic element (LE) PolarFire FPGA

with DDR4 and SPI-ﬂash, the kit is ideally suited for mid-bandwidth imaging and video applications.

Hardware Features

The hardware features are:

Device Board

• 12.5G CoaXPress PHY

• 100k LE PolarFire device in FCSG325 package

• Amphenol FCI connector

• One Micro BNC connectors –TX

• JTAG – programming (FP4)

Host Board

• 12.5G CoaXPress PHY

• HPC FMC connector

• Two Micro BNC connectors – RX and TX

Jumper Settings

The CoaXPress FMC daughter card comes with the following default jumper settings.

Jumper Description Factory Default

J7 CXP device board Short 2–3

J19 CXP host board Open

Programming

Microchip’s PolarFire CoaXPress FMC daughter card provides programmability using the FlashPro4/5

hardware. IAP programming and debug support is also provided in the board. The PolarFire video kit

must be programmed before use. An .stp ﬁle is available at https://www.microsemi.com/existing-parts/

parts/150887. For more information about programming procedures, see Documentation Resources.

Running the Demo

The CXP device board comes with a pre-programmed MIPI to CoaXPress bridge. The images captured

from the camera over MIPI CSI-2 are converted to CoaXPress packets by the CoaXPress IP and

CoaXPress FMC Daughter Quickstart Card

transmitted over the Micro BNC connector.

To run the demo, set up the board as outlined in the following steps. For detailed instructions, refer to

DG0884: PolarFire FPGA 12.5G video over CoaXPress Demo Guide.

1. Connect the FMC connector J11 on CXP host board to the FMC connector J14 on the PolarFire

video kit.

2. Insert the dual-camera module (part of the PolarFire Video kit) into J1 on the CXP device board.

Ensure to remove the camera lens caps.

3. Connect the Micro BNC cable from BNC_HST1 on the CXP host board to the BNC1 connector on

CXP-12 device board.

4. Connect the 12 V power supply to the J20 connector on the PolarFire video kit.

5. Connect the HDMI cable from J1 HDMI_TX to the HDMI port of the display monitor.

6. Power on the PolarFire video kit by sliding SW4 to the ON position.

CoaXPress FMC Daughter Quickstart Card

Microsemi, a wholly owned subsidiary of Microchip Technology Inc. (Nasdaq: MCHP), offers a comprehensive portfolio of semiconductor

and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance

and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and

synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete

components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions;

Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Learn more at www.microsemi.com.

Microsemi Headquarters

One Enterprise, Aliso Viejo, CA 92656 USA

Within the USA: +1 (800) 713-4113

Outside the USA: +1 (949) 380-6100

Sales: +1 (949) 380-6136

Fax: +1 (949) 215-4996

email: [email protected]

www.microsemi.com

Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose,

nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold

by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance speciﬁcations are

believed to be reliable but are not veriﬁed, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any

end-products. Buyer shall not rely on any data and performance speciﬁcations or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine

suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire

risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights,

whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi

reserves the right to make any changes to the information in this document or to any products and services at any time without notice.

Corporation. All other trademarks and service marks are the property of their respective owners. 

50200601 09/19

Software and Licensing

The Libero®SoC PolarFire Design Suite is required for designing with the PolarFire Video Kit. Libero

SoC PolarFire Design Suite offers high productivity with its comprehensive, easy-to-learn, easy-to-adopt

development tools for designing with Microsemi’s low power Flash FPGAs and SoC. The suite integrates

industry standard Synopsys Synplify Pro®synthesis and Mentor Graphics ModelSim®simulation with

best-in-class constraints management and debug capabilities.

Download the latest Libero SoC PolarFire release:

https://www.microsemi.com/product-directory/design-resources/1750-libero-soc

A Gold license is required to program the PolarFire Video Kit. A Software ID letter enclosed with the kit

contains Software ID and instructions on how to generate a Libero Gold license. For more information,

see https://www.microsemi.com/existing-parts/parts/150804.

Documentation Resources

For more information about the CoaXPress FMC daughter card, including schematics and user’s guides,

see the documentation at https://www.microsemi.com/existing-parts/parts/150887.

Support

For Technical Support, please login and create a case using the support portal at https://soc.microsemi.

com/Portal/Default.aspx.

Microsemi sales ofﬁces, including representatives and distributors, are located worldwide.

CoaXPress FMC Quickstart Card

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Microchip Technology Carte mère

Microchip Technology

Microchip Technology EVB-LAN9252-SPI Manuel utilisateur

Microchip Technology

Microchip Technology PAC1934 Manuel utilisateur

Microchip Technology

Microchip Technology BM63 Manuel utilisateur

Microchip Technology

Microchip Technology IS2066B Manuel utilisateur

Microchip Technology

Microchip Technology EVB-KSZ9563 Manuel utilisateur

Microchip Technology

Microchip Technology DM320115 Manuel d'installation

Microchip Technology

Microchip Technology PIC32MK Manuel utilisateur

Microchip Technology

Microchip Technology UCS2112 Manuel utilisateur

Microchip Technology

Microchip Technology AVR-IoT Wx Manuel d'installation

Microchip Technology

Microchip Technology EVB-LAN9370 Manuel utilisateur

Microchip Technology

Microchip Technology ATF15 Series Manuel utilisateur

Microchip Technology

Microchip Technology BM62 Manuel utilisateur

Microchip Technology

Microchip Technology EVB-LAN9500A-LC Manuel utilisateur

Microchip Technology

Microchip Technology PIC32CM LE00 Manuel utilisateur

Microchip Technology

Microchip Technology ATtiny817 Xplained Pro Manuel utilisateur

Microchip Technology

Microchip Technology SAM L10 Xplained Pro Manuel utilisateur

Microchip Technology

Microchip Technology EVB-USB3503 QFN Manuel utilisateur

Microchip Technology

Microchip Technology BM20 Manuel utilisateur

Microchip Technology

Microchip Technology PAC1921 Manuel utilisateur

Microchip Technology

Microchip Technology DIGITAL POWER Manuel utilisateur

Microchip Technology

Microchip Technology ATBTLC1000 Series Manuel utilisateur

Microchip Technology

Microchip Technology ATmega4809 Xplained Pro Manuel utilisateur

Microchip Technology

Microchip Technology EVB-LAN9252-HBI+ Manuel utilisateur

Microchip Technology

Microchip Technology MCP73833 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur