MGE UPS Systems Pulsar EX7 Manuel utilisateur

Pulsar EX : 51032233XT/AC

MGE UPS SYSTEMS

Manuel d'utilisation

User Manual

Manual de instrucciones

PulsarTM

EX7 / EX10 / EX15

EXB10 / EXB15

…

–

Pulsar EX : 51032233XT/AC MGE UPS SYSTEMS

Thank you for purchasing the EX

Uninterruptible Power Supply.

The EX has been designed to provide

many years of trouble-free operation.

Please review the manual which has

been prepared to provide you with all

the necessary information concerning

the installation and use of your EX.

For service call 1-800-523-0142.

Sincerely,

MGE UPS SYSTEMS

Nous vous remercions pour l’achat de

l'Alimentation sans interruption EX.

Nous vous invitons à lire ce manuel en

souhaitant qu’il apporte tous les

éléments nécessaires à l’installation et

à l’utilisation de votre onduleur EX.

Appelez le numéro de téléphone 714-

513-7349.

Nous vous prions d’agréer, Madame,

Monsieur, nos sentiments les meilleurs.

MGE UPS SYSTEMS

Le agradecemos la compra del

ondulador EX.

Lo invitamos a leer este manual

esperando que éste le brindará todos

los elementos necesarios para la

instalación y la utilización de su

ondulador EX.

Contáctenos al siguiente número de

teléfono 714-513-7349.

Le saludamos a Ud. muy cordialmente.

MGE UPS SYSTEMS

Federal Communications

Commission (FCC) Statement

Note: this equipment has been tested and

found to comply with Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when equipment is operated in

a residential environment. This equipment

generates, uses and can radiate radio

frequency energy and, if not installed and

used in accordance with the instruction

manual, may cause harmful interference to

radio communications. Properly shielded

and grounded cables and connectors must

be used in order to meet FCC emission

limits.

Pulsar EX : 51032233XT/AC

MGE UPS SYSTEMS

note

cthis equipment has been tested and found to comply with Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

service and factory repair - call 1 - 800 - 523 - 0142

cdirect questions about the operation, repair, or servicing of this equipment to MGE UPS SYSTEMS, Inc. Customer Support Services. Include

the part number, assembly number, and serial number of the unit in any correspondence. Should you require factory service for your equipment,

contact MGE UPS SYSTEMS, Inc. Customer Support Services and obtain a Return Materials Authorization (RMA) prior to shipping your unit.

Never ship equipment to MGE UPS SYSTEMS, Inc. without first obtaining an RMA.

proprietary rights statement

cthe information in this manual is the property of MGE UPS SYSTEMS, Inc., and represents a proprietary article in which MGE UPS SYSTEMS,

Inc., retains any and all patent rights, including exclusive rights of use and/or manufacture and/or sale. Possession of this information does not

convey any permission to reproduce, print, or manufacture the article or articles shown herein. Such permission may be granted only by specific

written authorization, signed by an officer of MGE UPS SYSTEMS, Inc.;

cIBM, PC-AT, ES/9000, and AS/400 are trademarks of International Business Machines Corporation. Other trademarks that may be used herein

are owned by their respective companies and are referred to in an editorial fashion only.

two years warranty policy

cMGE UPS SYSTEMS, Inc. (herein after referred to as MGE) warrants Topaz and Pulsar equipment manufactured by MGE to be free from

defects in materials and workmanship for a period of two years from date of purchase. If within such period purchaser discovers defective item

and promptly notifies MGE in writing, MGE shall repair or replace the item at the Company's option. This warranty shall not apply:

vto equipment not manufactured by MGE,

vto equipment repaired or altered by others than MGE,

vto equipment subjected to negligence, accident, or damage by circumstances beyond MGE's control, or to improper operations, maintenance,

or storage, or to other than normal use or service.

With respect to equipment not manufactured by MGE, the Warranty obligations of MGE shall in all respects conform and Warranties do not cover

reimbursement for labor, transportation, removal, installation, or other expenses which may be incurred in connection with repairs or replacement.

Except as may be expressly provided in an authorized writing by MGE, MGE shall not be subject to any other obligations or liabilities whatsoever

with respect to equipment manufactured by MGE or service rendered by MGE. After Sales Service Support Line: 1-800-523-0142.

Pulsar EX : 51032233XT/AC MGE UPS SYSTEMS

Postal address:

1660 Scenic Avenue

Costa Mesa, CA 92626

714-557-1636

51032233XT/AC

MGE UPS SYSTEMS, Inc.

MGE UPS SYSTEMS Pulsar EX : 51032233XT/AC i

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions for Models EX7/EX10/EX15/EXB10/EXB15 that should be

followed during installation and maintenance of the UPS batteries.

cThis equipment can be operated by any

individual, with no previous training;

cCAUTION: Risk of electric shock, even

with unit disconnected from AC power

source. Hazardous voltage still may be

present through operation from battery.

The battery supply should be disconnected

at the plus and minus terminals using the

quick disconnect connectors of the battery

when maintenance or service work inside

the UPS is necessary.

cThe UPS contains voltages which are

potentially hazardous. All repairs should

be performed by qualified service

personnel only;

cdo not attempt to power the UPS from

any receptacle other than a 2-pole 3-wire

grounded receptacle;

cdo not place Pulsar near water or in

environment of excessive humidity;

cdo not allow liquids or any foreign objects

to get inside Pulsar;

cdo not block air vents in the back of

Pulsar;

cdo not plug household appliances such as

hair dryers to Pulsar receptacles;

cdo not place Pulsar in direct sunlight or

close to heat-emitting source;

c~: alternating current supply symbol;

cCAUTION: do not dispose of battery or

batteries in a fire. The battery may explode;

cCAUTION: do not open or mutilate the

battery or batteries, released electrolyte is

harmful to the skin and eyes. It may be toxic;

cCAUTION: a battery can present a risk of

electric shock and high short circuit current.

The following precautions should be

observed when working with batteries:

vremove watches, rings or other metal

objects,

vuse tools with insulated handles,

vwear rubber gloves, boots and safety

glasses;

cplease dispose of the packaging in

accordance with the applicable legislation.

cthe AC power receptacle should be near

the equipment and easily accessible. To

isolate Pulsar from AC input, remove the

input power cord from the AC power

receptacle;

cif Pulsar is to be stored for a long time, it

is recommended to recharge the batteries

(by connecting AC power source to Pulsar,

switch "ON" or "OFF"), once a month for 24

hours to avoid a full batteries discharge;

cPulsar contains batteries that should be

disposed of or recycled in accordance with

local applicable laws;

cprior to installation, store Pulsar in a dry

location;

cstorage temperatures must be between

–4°F (-20°C) and +113°F (+45°C);

cservicing of batteries should be performed

or supervised by personnel knowledgeable

of batteries and the required precautions.

Keep unauthorized personnel away from

batteries;

cwhen replacing the batteries, use the

same number and the following type of

batteries:

vPulsar EX7: 2 x 12V - 7.2Ah,

vPulsar EX10 : 3 x 12V - 7.2Ah,

vPulsar EX15 : 4 x 12V - 7.2Ah;

iv Pulsar EX : 51032233XT/AC MGE UPS SYSTEMS

ENGLISH

introduction

In critical situations, count on MGE UPS

SYSTEMS Pulsar EX7, EX10 and EX15

uninterruptible power supplies (UPS). Their

protection keeps your data intact and

accessible.

Pulsar EX7, EX10 and EX15 UPSs ensure

top quality power around the clock, and

continue operations during power failures.

An intelligent microprocessor detects any

operating anomalies of the UPS and triggers

an alarm if corrective action is necessary.

In addition to the high-technology aspect of

these UPSs, you can count on backup from

our staff, a team of specialists, around the

corner from you, throughout the world. It’s

no accident that MGE UPS SYSTEMS is the

world leader in UPS protection.

application of Pulsar EX7, EX10

and EX15:

Network servers and interconnection

devices are very sensitive to electrical

disturbances of all types, including outages,

voltage sags, brownouts, spikes, etc. The

origins of the disturbances also vary, ranging

from atmospheric phenomena, to nearby

devices generating interference such as

elevators, photocopy machines and machine

tools, not to mention human errors, like the

accidental pulling out of power cords or

tripping of circuit breakers. The

consequences of these disturbances on

computer systems range from data losses to

hardware damage (power supplies, hard

disks).

Pulsar EX7, EX10 and EX15 are specially

designed to protect network servers and all

other interconnection devices that are

sensitive to electrical disturbances.

Pulsar EX7, EX10 and EX15 add fault-

tolerance to the utility supplying your

sensitive equipment.

Pulsar EX7, EX10 and EX15 are designed

as compact units and feature very silent

operation. They can be installed under a

desk, and can also be installed in a rack

(see "options").

Pulsar EX7, EX10 and EX15 provide a

stable supply of clean power, long back-up

time during a utility outage (see table) and

vast information and control possibilities

according to the configuration selected.

Pulsar EX7, EX10 and EX15 On-Line

technology provides maximum protection

and availability of your workstations, server,

and network communication devices.

Pulsar EX7, EX10 and EX15 offer many

functions and characteristics designed to

simplify power management:

cautomatic battery test carried out

periodically. In the event of a fault, a LED

provides advance warning for battery

replacement;

cfront panel LEDs signal all types of faults

and alarms;

cBar graph continuously indicates the

battery charge level or the critical load

power level;

cPulsar EX7, EX10 and EX15 are

environment friendly: all components are

recyclable and an electronic power-saver

device reduces power consumption if the

UPS is not active for a period exceeding 5

minutes while on battery back-up;

cEX Driver software provides rapid startup

of Pulsar EX7, EX10 and EX15 using the

EX Tuner configuration module. This module

adapts Pulsar EX7, EX10 and EX15 to user

preferences (battery test frequency, startup

and shutdown sequences, setting of battery

thresholds, etc.). Operation and monitoring

are ensured by the UPS Manager 3.1

module operating under Windows 3.1.

EX Driver connects to the RS 232 port on

the Pulsar EX7, EX10 and EX15 (see

"communication" section for further details);

cSolution-PacTM is a CD-ROM which

contains all the tools needed to supervise

your UPS.

MGE UPS SYSTEMS Pulsar EX : 51032233XT/AC v

options

crack installation kit: this kit is used to

install Pulsar EX7, EX10 and EX15 in a 19-

inch rack. The kit is designed to receive two

Pulsar EX7, EX10 and EX15, or one Pulsar

EX10/EX15 and a battery extension unit,

thus offering up to 3000 VA of power;

cUM Sensor environment measurement

unit: compatible with SNMP and UPS

Manager 2 Unix and OS/2, or Solution

PacTM, this unit measures the temperature

and the relative humidity in the room where

the Pulsar is installed. Eight relay contacts

are provided to transmit signals to an

administration platform, in the form of

voltage free contacts to enable monitoring of

(fire alarm, climate control fault, intrusion,

etc.);

cbattery extension module: Pulsar

EXB10/EXB15 battery extension modules

lengthen the battery time of the Pulsar

EX10/EX15 to meet your requirements.

additional communications

options:

ccommunication cables: these cables are

used for the file-closing utilities offered by a

number of network operating systems. They

are available for Novell NetWare, Microsoft

Lan Manager and Windows NT, IBM Lan

Server, Artisoft LANtastic, Banyan Vines,

Apple System 7, IBM AS400 and many

others;

cUPS Manager 2 communication

software: this software can be used for

automatic file closing on one or more

servers, as well as for remote UPS

shutdown and interrogation of all Pulsar

EX7, EX10 and EX15 operating parameters.

It is available for Novell NetWare, Microsoft

Lan Manager, IBM Lan Server, the main

Unix systems on the market (SCO, AIX, HP/

UX, OSF 1, etc.) VAX UMS and many

others;

cSNMP administration: MGE UPS

SYSTEMS has the most complete offering

for the administration of a group of UPSs

using the SNMP protocol with different

network-connection modules (UM Link

adaptor or proxy UM Agent software),

supervision modules (dedicated software

under Windows UM View or application for

NMS platforms such as HP OpenView or

Novell NMS) and a file-closing module (UM

Client). The MGE UPS SYSTEMS offering

complies with RFC 1628 specifications

(IETF) and was certified by the InterWorking

Labs during the Test Summit in June 1994;

cSNMP card: this card, inserted into your

unit, makes your UPS SNMP-compatible in

any environment;

cstatus information card: this option

provides you with 5 voltage free contacts: on

battery, on by-pass, low battery, load on

UPS.

Contact your dealer for further information

on these options.

vi Pulsar EX : 51032233XT/AC MGE UPS SYSTEMS

software supplied with

Pulsar EX7, EX10 and EX15

To meet the different operating

environments of your UPS, Pulsar EX

includes 2 MGE UPS SYSTEMS software

programs:

cEX-Driver software for Windows (on 3.5"

diskettes);

cSolution-PacTM network software (on CD-

ROM).

EX-Driver for Windows

EX Driver for Windows provides

communication with the UPS from a simple

Windows workstation. EX-Driver is

compatible with Windows 3.1x and Windows

95, for communication with the UPS via a

serial connection for various needs:

cpersonalization of the UPS operating

mode: the EX-Tuner utility, can be used to

change certain UPS operating parameters if

the standard factory settings are not ideal for

the operating conditions.

It is possible to modify the output voltage,

battery-test frequency, startup and shutdown

sequences, operation of automatic by-pass,

etc.;

cUPS monitoring from a Windows

workstation and system safety:

EX-Driver, UPS Manager 3 software, can

display the UPS status, warn the user if a

problem arises, and provide automatic

shutdown.

The many possibilities available include:

vsupervision of operating parameters

through a graphic interface (display of

battery charge level, remaining battery time

and UPS load level). These values can be

recorded periodically in a log file,

vmessages to the user in case of power

outage or UPS problem and recording of

events in a log file,

vduring long-term power outages,

automatic shutdown of the system and of

the UPS, followed by automatic restart of the

UPS (system reboot) on return of utility

power,

vPowerShareTM functions.

Solution-PacTM for networks and

multi-station systems

Novell Netware, Windows NT, OS/2 Lan

Server, SCO Unix, etc.)

Protection by UPS is only complete and

effective if combined with powerful software

functions which warn users and the operator

of any power supply problem, automate

system shutdown, supervise and remotely

control the UPSs. MGE UPS SYSTEMS

created Solution-PacTM for this purpose.

Solution-PacTM combines all these functions

in a single CD-ROM, usable in local or

remote mode (SNMP), and covering the

main network environments.

Solution-PacTM is the ideal solution for

protecting networks and multistation

systems.

Solution-PacTM on a single CD-ROM

contains everything needed to safeguard

one or more systems and to supervise one

or more UPSs from a local or remote station.

Solution-PacTM includes SNMP UM-Agent,

UM-Client system shutdown software, and

UM-Console supervision software.

Solution-PacTM is a powerful and upgradable

software tool which provides all the

supervision, control and safety functions

associated with a UPS:

vgraphic display of the UPS,

vremote control of the UPS and output

receptacles,

vuser alarm of problems,

vrecording of events in log files,

vautomatic system shutdown and restart,

vlocal or remote supervision of UPSs and

ancillary devices,

vtransmission of UPS information and

alarms to any SNMP supervisor.

Pulsar EX7/EX10/EX15/EXB10/EXB15 presentation

présentation de Pulsar EX7/EX10/EX15/EXB10/EXB15

presentación de Pulsar EX7/EX10/EX15/EXB10/EXB15

general contents / sommaire général / sumario general

Pulsar presentation............................................................................................................................. 3

présentation de Pulsar

presentación de Pulsar

english....................................................................................................................................................................... 11

getting started / operation

français.................................................................................................................................................................... 19

mise en service / exploitation

español..................................................................................................................................................................... 27

puesta en servicio / explotación

Pulsar EX : 51032233XT/AC

MGE UPS SYSTEMS 12

Pulsar EX : 51032233XT/ACMGE UPS SYSTEMS

3Pulsar EX : 51032233XT/AC MGE UPS SYSTEMS 4Pulsar EX : 51032233XT/AC MGE UPS SYSTEMS

Pulsar EX7/EX10/EX15 Pulsar EX7/EX10

front view / vue avant / vista delantera rear view / vue arrière / vista trasera Pulsar EX15 Pulsar EXB10/EXB15

rear view / vue arrière / vista trasera rear view / vue arrière / vista trasera

…

–

T 15A 125V

Vac IN

U-Talk

6a 6b

I max 8.3A

Vac OUT

Site wiring

fault

solution-pac

DC BREAKER

30A 65Vdc

I O

T 20A 125V

U-Talk

I max 12.5A

Vac OUT

Site wiring

fault

MGE UPS SYSTEMS

ATTN: CUSTOMER SUPPORT SERVICES

1660 SCENIC AVENUE

COSTAMESA, CA 92626

PLACE

STAMP

HERE

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MGE UPS Systems UPS

MGE UPS Systems

MGE UPS Systems Pulsar ellipse 300 Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Ellipse 600 Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar EXB 1000 - 1500 RT Manuel utilisateur

MGE UPS Systems

MGE UPS Systems GALAXY PW 100 Manuel utilisateur

MGE UPS Systems

MGE UPS Systems EPS 7000 Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar EXtreme CLA 2000 VA Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar EX20 Manuel utilisateur

MGE UPS Systems

MGE UPS Systems PULSAR 1000 Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar ellipse 300 Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar Evolution 1100 Tower Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar EXtreme 1500C Manuel utilisateur

MGE UPS Systems

MGE UPS Systems 12 kVA Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar ellipse 1200 Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar MX Frame 15000 RT Manuel utilisateur

MGE UPS Systems

MGE UPS Systems 250A Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar EX10Rack Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Comet TM 5 - 30 kVA Manuel utilisateur

MGE UPS Systems

MGE UPS Systems 5000 RT Manuel utilisateur

MGE UPS Systems

MGE UPS Systems 5103304XXX Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar 700 Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar Extreme 1500 VA Manuel utilisateur

MGE UPS Systems

MGE UPS Systems EX 11RT Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Nova 600 AVR Manuel utilisateur

MGE UPS Systems

MGE UPS Systems Pulsar Extreme 3200C Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur