Metra Electronics 99-6535B Manuel utilisateur

REV. 5/24/2016 INST99-6535B

INSTALLATION INSTRUCTIONS FOR PART 99-6535B

CAUTION!

All accessories, switches, climate controls panels,

and especially air bag indicator lights must be connected before

cycling the ignition. Also, do not remove the factory radio with

the key in the on position, or while the vehicle is running.

• ISO DIN radio provision with pocket

• Painted matte black

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • XSVI-6523-NAV

Antenna Adapter: • 40-EU55

• Panel removal tool • Cutting tool

• T-25 Torx screwdriver

TOOLS REQUIRED

Fiat 500X 2016-up

99-6535B

Table of Contents

BCD

Dash Disassembly ................................................. 2

Kit Assembly

–ISO DIN radio provision with pocket...................... 3

99-6535B

Dash Disassembly

1. Open upper storage compartment

on passenger side. (Figure A)

2. Unclip, unplug, and remove painted

hazard button panel below the radio.

(Figure A)

3. Unscrew (2) T-25 Torx screws at the

bottom of the radio trim. (Figure B)

4. Unclip the radio trim. (Figure B)

5. Unscrew (4) T-25 Torx screws

securing the radio into the dash.

(Figure C)

6. Unplug and remove the radio from

the dash. (Figure C)

7. Cut the shaded areas in the dash

cavity to gain suitable depth for the

new radio chassis (CAUTION: The

vents are located directly behind the

area to be cut, use extreme caution

to not cut into them). Be careful, you

may want to make multiple cuts.

(Figures D, E)

Continue to kit assembly.

(Figure A)

(Figure C)

(Figure B)

(Figure E)

(Figure D)

Be careful not to cut

into the vents!

First cut

Second cut

Remove shaded area

99-6535B

Kit Assembly

(Figure C)

(Figure B)

(Figure A)

ISO DIN radio provision

1. Attach the pocket to the radio

brackets using the (4) supplied

#8 x 3/8” Phillips screws. (Figure A)

2. Remove the metal DIN sleeve and

trim ring from the aftermarket radio.

3. Slide the radio into the completed

assembly, and secure it using

screws supplied with the radio.

(Figure B)

4. Insert the radio trim panel into the

factory radio trim removed in step

4 of dash disassembly. (Figure C)

5. Locate the factory wiring harness

and antenna connector in the

dash, complete all necessary

connections to the radio and test

the radio for proper operation.

Metra recommends using the

proper mating adapter from

Metra and/or AXXESS.

6. Mount the radio into the dash

using the factory hardware.

7. Reassemble the dash in the

reverse order of disassembly.

REV. 5/24/2016 INST99-6535B

INSTALLATION INSTRUCTIONS FOR PART 99-6535B

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

IMPORTANT

If you are having difficulties with the installation

of this product, please call our Tech Support line

at 1-800-253-TECH. Before doing so, look over

the instructions a second time, and make sure

the installation was performed exactly as the

instructions are stated. Please have the vehicle

apart and ready to perform troubleshooting

steps before calling.

Table des matières

Autres manuels Metra Electronics Système stéréo de voiture

Metra Electronics

Metra Electronics 99-9223 Manuel utilisateur

Metra Electronics

Metra Electronics 99-7516B Manuel utilisateur

Metra Electronics

Metra Electronics AW-586FT Manuel utilisateur

Metra Electronics

Metra Electronics 99-7431 Manuel utilisateur

Metra Electronics

Metra Electronics 95-7870G Manuel utilisateur

Metra Electronics

Metra Electronics 99-3043 Manuel utilisateur

Metra Electronics

Metra Electronics 99-7009 Manuel utilisateur

Metra Electronics

Metra Electronics 99-5812 Manuel utilisateur

Metra Electronics

Metra Electronics 99-7603 Manuel utilisateur

Metra Electronics

Metra Electronics XIA-LCD Manuel utilisateur

Metra Electronics

Metra Electronics 99-8713 Manuel utilisateur

Metra Electronics

Metra Electronics 95-3003G Manuel utilisateur

Metra Electronics

Metra Electronics 99-8219 Manuel utilisateur

Metra Electronics

Metra Electronics 99-7009 Manuel utilisateur

Metra Electronics

Metra Electronics 95-3027 Manuel utilisateur

Metra Electronics

Metra Electronics 99-7516B Manuel utilisateur

Metra Electronics

Metra Electronics 99-8903B Manuel utilisateur

Metra Electronics

Metra Electronics 95-6511 Manuel utilisateur

Metra Electronics

Metra Electronics 99-7410 Manuel utilisateur

Metra Electronics

Metra Electronics 95-7504 Manuel utilisateur

Metra Electronics

Metra Electronics 99-8218 Manuel utilisateur

Metra Electronics

Metra Electronics 99-7329 Manuel utilisateur

Metra Electronics

Metra Electronics 95-1005 Manuel utilisateur

Metra Electronics

Metra Electronics MITO-02 Manuel utilisateur

Manuels Système stéréo de voiture populaires d'autres marques

JL Audio

JL Audio Stealthbox SB-CAN-G2MVX3D/10TW3 Manuel utilisateur

Clarion

Clarion PU-9836A Manuel utilisateur

Sony

Sony MEX-BT5750U Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric AR0M Manuel utilisateur

Sony

Sony RM-X7BT Manuel utilisateur

Insignia

Insignia NS-HD5113 Manuel utilisateur

Clarion

Clarion BTD3341 Manuel utilisateur

USA SPECS

USA SPECS PA11-VW6 Manuel utilisateur

Sony

Sony MEX-N4380BT Manuel utilisateur

Kenwood

Kenwood KCD-BT6544U/UY Manuel utilisateur

JVC

JVC KD-DB912BT Manuel utilisateur

Philips

Philips CSQ405/98 Manuel utilisateur

Alpine

Alpine TDM-7544 Manuel utilisateur

Autotek

Autotek TransAm TA 1400 Manuel utilisateur

Clarion

Clarion PN-3124N-A Manuel utilisateur

Denso TEN

Denso TEN FT0108A Manuel utilisateur

Pyle

Pyle PLD57MU Manuel utilisateur

Harman

Harman Chrysler Radio Navigation System RB4 Manuel utilisateur