Messoa SCR510HB-HN2 Manuel utilisateur
License Plate Capture Camera
Instruction Manual
Before attempting to connect or operate this product, please read these
instructions carefully and save this manual for future use.
CONTENTS
SAFETY INFORMATION...
..................................................
PART DESCRIPTION & DIMENSION.....................................
INSTALLATION..................................................................
SPECIFICATION................................................................
1
3
4
9
P32-510010-000A 510 A.2
1. Read this Instruction Manual:
Before using the product, please carefully read through the
safety information and operation instructions.
2. Keep this Instruction Manual:
Safely store the Instruction Manual for future reference.
3. Follow instructions:
When operating the unit, please follow instructions on the
Instruction Manual.
4. Cleaning:
Before cleaning the unit, please rst unplug the power.
5. Peripheral/accessories:
Do not place the unit on an unstable cart, tripod, or on a
tabletop as personal injury and damage to the unit may occur
due to a fall. Please use ofcially certied support, frames, and
accessories included with the product. Follow the instructions in
this Instruction Manual during installation to ensure the quality
and maintain safety.
6. Power:
Please follow the labeled specications on the unit and
supply with the correct power. If unsure of the actual power
requirements, please contact the distributor and do not connect
the power at will.
7. Power cable:
The power cable must be properly secured as improper
connections may cause a short circuit, re hazards, or serious
damage and hazards.
8. Lightning strike:
During prolonged inactivity, please unplug the power cable and
the video cable to avoid damage from lightning strike and power
surges.
9. Foreign objects and uids:
Please do not insert any objects into the unit or spill liquids to
avoid short circuits.
10. Warning:
High voltage circuitry contained within the unit. Do not
disassemble to avoid electric shock. All maintenance operations
must be handled by qualied maintenance staff.
SAFETY INFORMATION
Safety Information:
1
11. Maintenance:
When the following occurs, please rst power off the unit and
then perform maintenance by qualied maintenance staff:
(a). Damaged power cable or socket
(b). Liquid spills or foreign objects in the unit
(c). Inoperable unit when proper instructions are followed
(d). Dropped unit or damaged shell
(e). Other anomalies
12. Component replacement:
Replaced components by the maintenance staff must be ofcial
certied parts of identical specications. Using unauthorized
components can cause re hazards and electric shock damage.
13. Safety inspection:
After the unit maintenance has been completed, the maintenance
staff must perform safety inspection to ensure proper operation.
SAFETY INFORMATION
The triangle symbol with lightning arrow indicates
that ungrounded “Hazardous Voltage” exists within
the unit. The voltage level may cause personal
electric shock hazards.
The triangle symbol with exclamation mark
indicates that there are important operation and
maintenance instructions in the Instruction Manual.
2
PART DESCRIPTION & DIMENSION
1. Structure Illustration:
2. Dimension and Accessory
3
Accessory Pack
(1) 3 Glands
(2) Hexagon screw driver
(3) Spacer
The gure above is the illustration of KIT, which consists of License
Plate Capture BW camera with IR lamp and color overview camera
with IR lamp, these two cameras can be used separately.
INSTALLATION
3. How to install the camera and bracket:
First of all, take out the bracket from the box and put the power
cable and video cable through the bracket then x the bracket
to the wall (Fig 3). (Loose the screws of the bracket for easy
assembly if necessary.)
4
Secondly, take out the housing and open the side cover with
hexagon screw driver (Fig 4).
3.1
3.2
Fig. 3
Fig. 4
INSTALLATION
Put the power cable and video cable through the bottom of the
housing and let them pass from the hole. (Fig 5)
5
Attention: Two solutions are available for waterproof: (1)
User can take out the spacer from the accessory pack
and stick it right by the outlet (Fig 6) or (2) use the three
glands cover and let the power cable and video cable
pass through the hole of glands cover (Fig7).
3.3
Fig. 5
Fig. 7
Fig. 6
INSTALLATION
Plug and x the power cable to the terminal and plug the video
cable to video output of the camera (Fig 8).
6
Lock the three glands tightly for waterproof
3.4
3.5
Connect the BNC cable to Pin 202 for LED driver board. (Fig 9)3.6
Fig. 8
Fig. 9
Video sync function
RS 485 control
AC24V input
AC 90-260V
Power board Connection
(Hi voltage AC90-260V model only)
Connector board Connection
Switch Position Denition
Left: IR always ON(default by B&W
camera)
Middle:
IR will automatically turn ON
under 10lux(default by color
camera)
Right: reserved
S203
INSTALLATION
Next, use the provided screws to x the housing on the bracket
with hexagon screw driver (Fig 10) .
7
Loosen the pan and tilt adjustment screw of the bracket to
modify the angle of the hosing and then tighten the screw (Fig
11) .
3.7
3.8
Fig. 10
Fig. 11
INSTALLATION
8
Replace the side cover and tighten the screws (Fig 12, 13).
3.9
Fig. 12
Fig. 13
Table des matières
Autres manuels Messoa Caméra de sécurité
Messoa
Messoa SCB280 Manuel utilisateur
Messoa
Messoa SCB290-HN5 Manuel utilisateur
Messoa
Messoa NCB750 Manuel utilisateur
Messoa
Messoa SCR368-HN5 Manuel utilisateur
Messoa
Messoa LPR615 Manuel utilisateur
Messoa
Messoa NCC700 Manuel utilisateur
Messoa
Messoa SDF418 Manuel utilisateur
Messoa
Messoa NDR891 Manuel utilisateur
Messoa
Messoa NDF821 Manuel utilisateur
Messoa
Messoa NOD316 Manuel utilisateur
Messoa
Messoa UFD301 Manuel utilisateur
Messoa
Messoa NCR875E(H) Manuel utilisateur
Messoa
Messoa SCR367 Manuel utilisateur
Messoa
Messoa PTZ900 Manuel utilisateur
Messoa
Messoa NDR891(H) Manuel utilisateur
Messoa
Messoa NCR870 Manuel utilisateur
Messoa
Messoa SDF418 Manuel utilisateur
Messoa
Messoa LPR610 Manuel utilisateur
Messoa
Messoa SPD970 Manuel utilisateur
Messoa
Messoa HCR176 Manuel utilisateur
