Messoa SCR515PRO Manuel utilisateur
Intelligent Trafc Camera
Instruction Manual
Before attempting to connect or operate this product, please read these
instructions carefully and save this manual for future use.
CONTENTS
1. SAFETY INFORMATION...
.............................................
2. PART DESCRIPTION & DIMENSION.................................
3. INSTALLATION..............................................................
4. INTERNAL PART NAMES.................................................
5. OSD SETUP MENU.........................................................
6. MENU SETTING.............................................................
7. SPECIFICATION.............................................................
1
4
5
11
13
16
32
P32-515010-000A A.3 515
1
1
1. Read this Instruction Manual:
Before using the product, please carefully read through the
safety information and operation instructions.
2. Keep this Instruction Manual:
Safely store the Instruction Manual for future reference.
3. Follow instructions:
When operating the unit, please follow instructions on the
Instruction Manual.
4. Cleaning:
Before cleaning the unit, please rst unplug the power.
5. Peripheral/accessories:
Do not place the unit on an unstable cart, tripod, or on a
tabletop as personal injury and damage to the unit may occur
due to a fall. Please use ofcially certied support, frames, and
accessories included with the product. Follow the instructions in
this Instruction Manual during installation to ensure the quality
and maintain safety.
6. Power:
Please follow the labeled specications on the unit and
supply with the correct power. If unsure of the actual power
requirements, please contact the distributor and do not connect
the power at will.
7. Power cable:
The power cable must be properly secured as improper
connections may cause a short circuit, re hazards, or serious
damage and hazards.
8. Lightning strike:
During prolonged inactivity, please unplug the power cable and
the video cable to avoid damage from lightning strike and power
surges.
9. Foreign objects and uids:
Please do not insert any objects into the unit or spill liquids to
avoid short circuits.
10. Warning:
High voltage circuitry contained within the unit. Do not
disassemble to avoid electric shock. All maintenance operations
must be handled by qualied maintenance staff.
SAFETY INFORMATION
Safety Information:
2
3
11. Maintenance:
When the following occurs, please rst power off the unit and
then perform maintenance by qualied maintenance staff:
(a). Damaged power cable or socket
(b). Liquid spills or foreign objects in the unit
(c). Inoperable unit when proper instructions are followed
(d). Dropped unit or damaged shell
(e). Other anomalies
12. Component replacement:
Replaced components by the maintenance staff must be ofcial
certied parts of identical specications. Using unauthorized
components can cause re hazards and electric shock damage.
13. Safety inspection:
After the unit maintenance has been completed, the maintenance
staff must perform safety inspection to ensure proper operation.
SAFETY INFORMATION
The triangle symbol with lightning arrow indicates
that ungrounded “Hazardous Voltage” exists within
the unit. The voltage level may cause personal
electric shock hazards.
The triangle symbol with exclamation mark
indicates that there are important operation and
maintenance instructions in the Instruction Manual.
2
3
IMPORTANT SAFETY INSTRUCTIONS
The equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case users will be required to correct the interference at
their own expense.
FCC Caution:
To ensure continued compliance, use only shielded interface cables when
connecting to computer or peripheral devices. Any changes or modications not
expressly approved by the party responsible for compliance could void the user’s
authority to operation this equipment.
4
5
PART DESCRIPTION & DIMENSION
1. Structure Illustration:
The gure above is the illustration of the housing, which may be used
with most of ICR real Day and Night cameras.
2. Dimension and Accessory
Accessory Pack
(1) Video sync cable (7) Spacer
(2) Day/night sync cable (8) 2 Screws (for tripod stand)
(3) Camera power cable (9) User manual
(4) BNC connector
(5) 3 Glands
(6) Hexagon screw driver
4
5
INSTALLATION
Take the bracket from the box and put the power cable and video
cable through the bracket then x the bracket to the wall. (Loose
the screws of the bracket for easy assembly if necessary.)
Secondly, take out the housing and open the side cover with
hexagon screw driver.
3.1
3.2
3. How to install the camera and bracket:
6
7
INSTALLATION
Put the power cable and video cable through the bottom of the
housing and let them pass from the hole.
Attention: Two solutions are available for waterproof: (1)
User can take out the spacer from the accessory pack and
stick it right by the outlet (Fig A) or (2) use the three glands
cover and let the power cable and video cable pass through
the hole of glands cover (Fig B).
3.3
Fig. B
Fig. A
6
7
INSTALLATION
IR LED driver board
Heater
board
Camera
position
Inner Part Denition
Fan
3.4 Open the side cover and you can see the housing inner part.
There are two installation types.
Power
Adpator
( only in
AC90~260V
housing)
power connector board (only
in AC90~260V housing)
Heater
8
9
INSTALLATION
3.5 Connect the power cable to the power port of the AC24V camera
and to the A section (L+: power +/ N-: power- ) as below.
Connect the outside AC24V power supply to the section B
(L+: power+/ N-: power- ).
Partial heater board
Note: For the AC90~260V housing type, connect the power cable
to the power port of the AC90~260V camera and to A section
(L+: power +/ N-: power- ). Connect the outside AC90~260V
power supply to the section B (L+: power+/ N-: power- ).
Partial power connector board
B.
A.
Table des matières
Autres manuels Messoa Caméra de sécurité
Messoa
Messoa NDR890-HN5 Manuel utilisateur
Messoa
Messoa NIC990 Manuel utilisateur
Messoa
Messoa SCR367 Manuel utilisateur
Messoa
Messoa ZEIM-4000604G A.1 Manuel utilisateur
Messoa
Messoa NDR891PRO Manuel utilisateur
Messoa
Messoa NDF820 Manuel utilisateur
Messoa
Messoa NDR891 Manuel utilisateur
Messoa
Messoa SCR368-HN5 Manuel utilisateur
Messoa
Messoa SPD970 Manuel utilisateur
Messoa
Messoa SCB280 Manuel utilisateur
Messoa
Messoa SCB267-HN5 Manuel utilisateur
Messoa
Messoa NDR890 Manuel utilisateur
Messoa
Messoa NDF821PRO Manuel utilisateur
Messoa
Messoa NCB752 Manuel utilisateur
Messoa
Messoa NCB855E Manuel utilisateur
Messoa
Messoa NDR891(H) Manuel utilisateur
Messoa
Messoa NCB355 Manuel utilisateur
Messoa
Messoa NCC800 Manuel utilisateur
Messoa
Messoa LPR606 Manuel utilisateur
Messoa
Messoa NDZ760 Manuel utilisateur
