Marmitek CONNECT 236 Manuel utilisateur

Ce manuel convient aux modèles suivants

1

Table des matières

Langues :

Autres manuels Marmitek Changer

Marmitek

Marmitek CONNECT420 Manuel utilisateur

Marmitek

Marmitek Connect 540 UHD Manuel utilisateur

Marmitek

Marmitek CONNECT 421 Manuel utilisateur

Marmitek

Marmitek Connect 621 UHD 2.0 Manuel utilisateur

Marmitek

Marmitek SPEAKER ANYWHERE 350 Manuel utilisateur

Marmitek

Marmitek Connect 350 UHD 2.0 Manuel utilisateur

Marmitek

Marmitek Connect 620 UHD 2 Manuel utilisateur

Marmitek

Marmitek Connect TS21 Manuel utilisateur

Marmitek

Marmitek Connect 421 UHD Manuel utilisateur

Marmitek

Marmitek SWM1P Manuel utilisateur

Marmitek

Marmitek X10 SS12E Manuel utilisateur

Marmitek

Marmitek Connect 642 Pro Manuel utilisateur

Marmitek

Marmitek Connect TS41 Manuel utilisateur

Marmitek

Marmitek Connect 310 Manuel utilisateur

Marmitek

Marmitek AD10 Manuel utilisateur

Marmitek

Marmitek Connect 350 UHD Manuel utilisateur

Marmitek

Marmitek SW12 Manuel utilisateur

Marmitek

Marmitek Connect TS41 Manuel utilisateur

Marmitek

Marmitek CONNECT 410 Manuel utilisateur

Marmitek

Marmitek CONNECT 225 Manuel utilisateur

Marmitek

Marmitek SMM31 Manuel utilisateur

Marmitek

Marmitek Connect 310 Manuel d'instructions

Marmitek

Marmitek Connect 720 Manuel utilisateur

Marmitek

Marmitek SW10 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

CONNECT 236

Scart switcher

CONNECT 236™

Scart switcher

20245/20080129 • CONNECT 236™ + Scart switcher

ALL RIGHTS RESERVED MARMITEK ©

USER MANUAL 3

GEBRAUCHSANLEITUNG 17

GUIDE UTILISATEUR 31

MODO DE EMPLEO 55

MANUALE D’ISTRUZIONE 69

GEBRUIKSAANWIJZING 83

2 © MARMITEK

ENGLISH

3CONNECT 236™

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry spaces.

Do not expose the components to rain or moisture. Do not use the product close to a

bath, swimming pool etc.

• Do not expose the components of your systems to extremely high temperatures or bright

light sources.

• In case of improper usage or if you have altered and repaired the product yourself, all

guarantees expire. Marmitek does not accept responsibility in the case of improper usage

of the product or when the product is used for purposes other than specified. Marmitek

does not accept responsibility for additional damage other than covered by the legal

product responsibility.

• This product is not a toy. Keep out of reach of children.

• Do not open the product (battery panel excepted): the device may contain live parts. The

product should only be repaired or serviced by a qualified expert.

• Keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never

use old and new batteries or different types of batteries together. Remove the batteries

when you are not using the system for a longer period of time. Check the polarity (+/-)

of the batteries when inserting them in the product. Wrong positioning can cause an

explosion.

• Only connect the adapter to the mains after checking whether the mains voltage is

the same as the values on the identification tags. Never connect an adapter when it is

damaged. In that case, contact your supplier.

Introduction

Thank you for buying this Marmitek Connect 236. Marmitek products are made with care and

are of a high quality. Please read this user manual carefully and follow all the instructions.

Accessories

After unpacking the carton, make sure that, next to the Scart switcher, all of the following

accessories are supplied.

4 © MARMITEK

Front View and Back View

The Connect 236 has a total of six Input Channels. Input 6 is located on the front panel and

input 1 to 5 are located on the back panel.

1. Power switch button

To turn the Scart switcher on and off;

2. Remote Control Sensor

To receive the wireless remote control signals;

3. REC button

To change the RECORD function;

4. SET button

To confirm when changing your settings;

5. LCD Display

To display the Scart switcher status;

6. </> button

To change the input 1-6 (or program your settings)

7. Input 6 (External video input jacks)

To connect the device’s Video and Audio jack to the Scart switcher;

8. Scart Input 1

To connect the device’s Scart jack to the Scart switcher;

9. Scart Input/Output 2

To connect the device’s Scart jack to the Scart switcher;

10. Scart Input/Output 3

To connect the device’s Scart jack to the Scart switcher;

11. Scart Input 4

To connect the device’s Scart jack to the Scart switcher;

12. Scart Input 5

To connect the device’s Scart jack to the Scart switcher;

13. Scart Output

To connect the device’s Scart jack to the Scart switcher;

ENGLISH

5CONNECT 236™

14. Video Output

To connect the device’s Video jacks to the Scart switcher;

15. Audio Output 1

To connect the device’s Audio jack to the Scart switcher.

16. Audio Output 2

To connect the device’s Audio jack to the Scart switcher.

17. Coaxial 1,3,4 Input (Digital Audio)

To connect the device’s Coaxial jack to the Scart switcher;

18. Coaxial Output(Digital Audio)

To connect the device’s Coaxial jack to the Scart switcher;

19. Power

To connect the AC Power adapter to the Scart switcher.

Name and Functions

LCD display and Remote Control

You can select each Input Channel by using the numerical button

on the Remote Control.

The ” ” button is located on the Remote Control, which allows

the Connect 236 to be switched on and off.

1. Power switch button

To turn the Scart switcher on and off.

2. SET button

To confirm when using the NAME and REC function

3. REC button

To change the REC function;

4. CH1-CH6 button

To select the CH1-CH6 directly

5. < / > buttons

To change between Input 1 to 6

1. CH1-CH6 input indicator

2. Multi display, showing you the name of the device selected

3. REC 1 status

4. REC 2 status

6 © MARMITEK

Channel 1

Device name is DVD Player

REC 1 (Ch2) Locking with Ch5

REC 2 (Ch3) Locking with Ch4

Currently watching the Channel 1

Setup Instructions

Connecting the AC Power adapter

Make connections as shown in the diagram below.

Connecting the AC Power adapter

1. Connect the AC Power adapter plug to the AC9V IN located on the rear panel of the

Connect 236.

2. Connect the AC Power adapter into a suitable wall outlet.

IMPORTANT: The AC Power adapter must be the correct type. Do not use an AC Power

adapter other than the type indicated.

ENGLISH

7CONNECT 236™

Battery installation

1. Open the battery cover

Push and slide the battery cover open.

2. Insert the battery

Insert two AAA size batteries, observe the correct polarity.

3. Closing the cover

Close the battery cover until a click is heard.

System connections

Note:

1. To prevent any possible problems, always disconnect the power plug or switch Off the

POWER button of the Connect 236 before connecting or disconnecting the cables.

2. When connecting the cables, always insert the pin plugs correctly into the connecting

jacks. Insufficient insertion may result in no-sound problems or generation of noise.

Connecting through a Scart, Composite video and Audio

Make connections as the diagram shown below. When connecting the related devices, refer

to the related instruction manual.

8 © MARMITEK

Connecting directly to a TV

1. Plug the Scart cable into the corresponding input on your TV.

2. Plug the other end of Scart cable into the Connect 236 Scart output.

3. Plug your DVD Player, VCR, Satellite Receiver and Game Console, etc. into any of 5 Scart

inputs on the back of the scart switcher.

QUICK START

Example of a typical setup

The Connect 236 has been designed to connect up to six separate AV devices and output

their Audio/Video signal on the TV / Hi-Fi. Each device can be selected independently of each

other. Once a device has been connected, there is no need to remove any of the cables when

selecting an input.

1. Press the Power button to On

The back light of the LCD will fade in and the Connect 236 Scart switcher enters the

operation mode.

Press the button again and the back light of the LCD will fade out and the Connect 236

Scart switcher will switch off.

2. Press the < or > button to select a Channel

The LCD shows CH1, CH2, CH3, CH4, CH5 or CH6.

OUTPUT

SCART

(RGB)

SCART (COMPOSITE VIDEO) COMPOSITE

VIDEO

INPUT

SCART (RGB) YES YES YES

SCART (COMPOSITE VIDEO) NO YES YES

COMPOSITE VIDEO (Ch6) NO YES YES

ENGLISH

9CONNECT 236™

Power button standby

A small amount of the power is retained to support the memory and remote control sensor

function when the POWER is switched off. This is known as the standby mode. POWER may

be switched On/Off by the Remote Control.

Note: The above device connections are for reference only. Any suitable devices may be

connected to the Input Channels.

Programming the input channel

For easy identification of the AV device connected to the Connect 236, it is possible to name

each of the six inputs on the Input Channel Display.

Press and hold the “SET” button for 2 seconds, the “CH1” on the LCD will begin to flash.

Press the “<” or “>” button to select the desired Input channel (1-6).

Press the “SET” button, the “------”will be flashing.

Press the “<” or “>” button, the LCD will show the first available name: “DVD_1”.

Press “<” or “>” button to cycle through all the available names. When the desired name is

displayed press the “SET” button. The name will be stored.

Available names:

10 © MARMITEK

Note:

1. Repeat the procedure above each time you wish to rename.

2. During the setting, the mode will return to the previous stage if there is no input for 10 sec.

3. If you want to clear the names on the Connect 236, press and hold “<” and “>” on the

Connect 236 for 5 seconds, and all the programmed names will be cleared.

4. You can also use the Remote Control for renaming.

Before setting the record function

Multi-function A/V switching is possible with 5 input terminals and 2 input/output terminals

enabling:

- locking function prevents switching over the device erroneously during recording.

- the recording of one signal on two different recorders at the same time.

- the recording of two different signals on two different recorders at the same time.

Recording Set Up.

1. Channel 2 and Channel 3 are assigned for RECORD. Connect your record device to

Channel 2/3.

2. You can define the name of your RECORD Device, refer to “Programming the input

channel” for how to assign the device name.