Mankati Fullscale XT Manuel utilisateur

Fullscale XT

a Fast, High Resolution, Huge Printing Volume 3D Printer

User Manual

WELCOME 1

Safty 2

Specications 3

How it Works 4

SETUP 5

Unpacking 6

Accessory 9

Tool Box 10

Setting Up Mankati Fullscale XT 11

Fullscale XT Outlook 15

LCD INSTRUCTION 16

LCD Menu Structure 17

LCD Menu 18

SOFTWARE 20

Download and Install 21

Interface 22

ParameterDenition 23

FIRST RUN 29

Stick the Kapton tape 30

Leveling Build Plate 33

Feed the Filament 35

Print from SD Card 36

Unload the Filament 37

MAINTENANCE 38

Maintenance 39

TROUBLESHOOTING 41

Setting and Calibration Problems 42

Hardware Problems 43

Printing Problems 45

Contents

TO THE

MANKATI FULLSCALE XT

WELCOME 1

To get perfect prints, your may need to experiment and tinker at the beginning.

This User Manual will guide you to start your journey with the Mankati Fullscale XT

easily and quickly.

Forget your existing knowledge of other 3D printers, take the time to learn about

your Mankati Fullscale XT, it will show you a completely new experience.

Print your idea right from now on!

Safty

GROUND CONNECTION

CAUTION: Make sure the power grounded, if not, may cause the accumulation of static-electricity so as to damage electronic system.

HEAT and HIT

WARNING: Mankati Fullscale XT 3D Printer generates high temperatures and includes moving parts that can cause injury. Please Never Touch the nozzle,

the heated aluminum block or the build plate after preheating or printing to avoid scalding.

CAUTION: Do not leave the printer attended for a long time during printing. If you have to do so, do follow these guidances:

• Ensure that the first layer of the print is properly land on the build plate.

• Ensure filament wound on the spool to keep feeding smoothly, in case of tangles.

• Monitor your print periodically.

CAUTION: The melt filament will emit the plastic odor during printing. Please keep ventilation in the work place.

CAUTION: In case of emergency disconnect power supply from wall socket.

CAUTION: Refit and modification privately may destroy the working and safty performance. So any refits and modifications not expressly approved by

Mankati can void the right of warranty and safty gurantee.

COMPLIANCE: Your Mankati Fullscale XT has been tested strictly by SGS with the permission of FCC, CE, IC, C-Tick and ROHS.

It complies with the rules and limits of EMC, MD and ROHS, to provide reasonable protection against harm to the human, from electromagnetic

compatibility, mechanical structure and chemical component.

The users have the right to ask for the testing report with Mankati.

www.mankati.com 3

Specifications

Fullscale XT

Forming Tech. Fused deposition modeling (FDM)

Extruder Number 1 or 2 (Dual extruders Perfect supported)

Build Size 250*250*300mm

Specication

Precision X,Y 0.01mm, Z 0.015mm

Layer Resolution 0.04mm-0.4mm

Nozzle Diameter 0.4mm

Max. Travel Speed 250mm/sec.

Max. Print Speed 180mm/sec.

Max. Extruder Temperature 270Deg.

Max. Hot Bed Temperature 110Deg.

Max. Extrude Speed 100mm/sec

Filament

Filament Type ABS, PLA(Spec.), PVA, PS, Nylon

Filament Diameter

3mm

Filament Temperature 150~270Deg.

Filament Colors Black, White, Red, Yellow, Green, Blue, etc.

Hardware

Controller Arduino ATmega2560 R3Micro Controller

Mother Board Mankati Stable Main Board V3.x

Stepper Motor X, Y axis 42*48, 1.3A; Z axis 42*63, 1.5A

Geared Motor E42*42, Ratio 1:10

Power Input 110~220V, 1.5A

Power Output 24V, 10.5A

Software

Operating System XP, Vista, Win7, Win8, Mac, Linux/Unbutu

File Format STL, OBJ, GCode

Printing Software and Slicer MankatiUM

Software Language

English, Deutsch, French, Nederlands, Spanish, Polish

Machinery

Dimensions 380*420*530mm

Weight Around 34KG

How it Works

Mankati Fullscale XT 3D Printer makes solid, three-dimensional objects out of melted filament.

Your 3D designed files are translated into instructions for the Mankati Fullscale XT and read by the machine via SD card.

The Mankati Fullscale XT then heats the filament and squeezes it out through a nozzle onto a heated surface to build a solid object,

layer by layer. This method is called Fused Deposition Modeling [FDM].

Preparing the model

Use a 3D modeling software

to output stl or obj format 3D

modelle.

MankatiUM

MankatiUM is a software to

preparethegcodeleforyour

Fullscale XT.

In MankatiUM, you can set

printing parameters for your

model, such as layer thickness,

printing speed and nozzle

temperature, then output a

gcodeleforprinting.

Transfer the GCode file

SavetheGCodeleintotheSD

card, and insert it into the SD

card reader of the printer.

Prepare the printer

Before 3D printing, you need to

loadthelamentfortheprinter.

Print it!

Operate the knob beside the LCD

and choose the model from the

SD card inserted into the printer.

SETUP 2

Your Mankati 3D Printer was built and packaged very carefully at the Mankati

factory. Please take your time and carefully unpacking it and getting set up.

Unpacking

1. PlacetheMankatiFullscaleXTontheoor.Leave

enough available space for unpacking

3. Removetherstcardboardlayer.Opentheplastic

bag.

2. Your Mankati Fullscale XT is packed multiply by

carton, cardboard, foam and sealed bag to ensure the

machine to your hands in perfect status.

NOTE: You can download a PDF copy of this User

manual under manual at the support page: http://www.

mankati.com/download.html

www.mankati.com 7

Unpacking

6. Removethestretchlmaroundthe3Dprinter.You

canseealltheaccessories,toolsandlaments.

5. Place it on a stable surface, and leave enough space

surrounding it to check accessories.

4. Now it’s time to take out your Mankati Fullscale

XT from the box. Lift it out by grasping the frame

rmlybutgentlyattheleft ①and right ②of the

Mankati Fullscale XT.

Caution: Be careful NOT to grip the belt or shaft of

the motion system.

Unpacking

8. T

akingoutthelaments:

Fortheeaseoftransport,thelamentsarexedtightly

by build plate supporter. Let’s take them out, following

thenext3steps:

1) Connect power wire to printer.

2) Turn on the printer.

3)GototheLCDmenu:"Prepare>Autohome",and

the two holders will go to the top of Z axis.

4)TakeoutthetwospoolsofPLAlamentandthetwo

feeding devices.

7. T

ake all the accessories out.

Table des matières

Autres manuels Mankati Imprimante 3D

Mankati

Mankati FULLSCALE XT PLUS Manuel utilisateur

Manuels Imprimante 3D populaires d'autres marques

Ultimaker

Ultimaker S5 Material Station Manuel utilisateur

EcubMaker

EcubMaker TOYDIY Manuel utilisateur

AnyCubic

AnyCubic Kossel Plus Manuel utilisateur

ReDeTec

ReDeTec ProtoCycler Manuel utilisateur

Kywoo3D

Kywoo3D Tycoon IDEX Manuel utilisateur

CraftBot

CraftBot PLUS PRO Manuel utilisateur

3DGence

3DGence INDUSTRY F340 Manuel utilisateur

HP Jet Fusion 4200 Mode d'emploi

Rokit

Rokit AEP Series Manuel utilisateur

AnkerMake

AnkerMake M5 Manuel utilisateur

DIYElectronics

DIYElectronics PRUSA I3 Instructions de montage

Ackuretta

Ackuretta FreeShape 120 Manuel utilisateur

LONGER

LONGER LK5Pro Manuel utilisateur

Stratasys

Stratasys J850 Manuel utilisateur

MakerBot

MakerBot Replicator Manuel utilisateur

Stratasys

Stratasys FDM Vantage Series Manuel utilisateur

ZYYX

ZYYX Pro II Manuel utilisateur

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guide de l'utilisateur