Major tech MT935 Manuel utilisateur

INSTRUCTION MANUAL

MOTOR & PHASE ROTATION INDICATOR

MT935

Contents Page no

1. Introduction....................................................................................3

2. Symbols..........................................................................................3

3. Safety Information...........................................................................3

4. Accessories Included........................................................................4

5. Meter Description............................................................................4

6. Operation...................................................................................... 4

6.1. Determine Rotary Field Direction...............................................4

6.2. Non-Contact Rotary Field Indication...........................................5

6.3. Determine the Motor Connection...............................................6

6.4. Magnetic Field Direction...........................................................6

7. Battery Replacement........................................................................6

8. Specifications.................................................................................6

8.1. Determine Rotary Field Direction...............................................6

8.2. Non-Contact Rotary Field Indication...........................................7

8.3. Determine the Motor Connection...............................................7

8.4. Electrical Specifications............................................................7

8.5. Safety Specifications................................................................7

8.6. Environmental.........................................................................7

8.7. Mechanical Specifications.........................................................7

1. INTRODUCTION

The MT935 is a handheld, battery-operated meter designed to detect the

rotary field of three-phase systems and determine motor-rotation direction.

2. SYMBOLS

The following symbols appear on the Meter or in this manual.

3. SAFETY INFORMATION

CAUTION identifies conditions & actions that may damage the meter.

WARNING identifies conditions & actions that pose hazard to the

user. To avoid possible electric shock or fire, do the following:

• Read the safety information carefully before using or servicing this meter.

• Adhere to local and national safety codes.

• Individual protective equipment must be used to prevent shock and

injury.

• Using this meter in a manner not specified by Major Tech may impair

safety features/protection provided by the equipment.

• Avoid working alone.

• Inspect the test leads for damaged insulation or exposed metal. Check

test lead continuity, damaged leads must be replaced, do not use the

meter if it appears to be damaged.

• Be careful when working above 30V AC RMS, 42V AC peak and 60V DC,

such voltages pose a shock hazard.

• When using the probes, keep fingers away from probe contacts, keep

fingers behind the finger guards on the probes.

• Measurements can be adversely affected by impedances of additional

operating circuits connected in parallel or by transient currents.

Risk of electric shock

Risk of Danger, Important information see manual.

Hazardous Voltage.

Equipment protected by double or reinforced insulation

Battery

Earth

AC or DC

Conforms to EU directives

Overvoltage (Installation) Category III. Pollution Degree 2 per

ICE 1010-1 refers to the level of Impulse withstand voltage

protection provided. Equipment of Overvoltage Category III is

equipment in fixed installations (e.g. electricity meter and

primary over-current protection equipment).

• Verify operation prior to measuring hazardous voltages (voltages above

30V AC RMS, 42V AC peak and 60V DC).

• Do not use the meter with any of the parts removed.

• Do not use the meter around explosive gas, vapor, or dust.

• Do not use the meter in a wet environment.

4. Accessories Included

3 Piece Self-Retaining Test Leads, 3 Alligator Clips, 9V Battery & Manual.

5. METER DESCRIPTION

1 - Test Lead Input Jack

2 - L1 Indicator

3 - L2 Indicator

4 - L3 Indicator

5 - Clockwise Rotation Indicator

6 - Counter Clockwise Rotation Indicator

7 - ON/OFF Indicator

8 - ON/OFF Button

9 - Brief Instructions on

Instrument Rear

10 - Battery Cover

6. OPERATION

6.1. Determine Rotary Field Direction

1. Connect one end of the test leads to the Meter, make sure the L1, L2 and

L3 test leads are connected to the corresponding input jacks.

2. Connect the test probes to the three main phases, press the ON/OFF

Button, the green ON indicator shows that the meter is ready for testing.

3. Either the Clockwise or Counter Clockwise Rotary indicator illuminates

showing the Type of rotary field direction present.

4. The rotary indicator lights up even if the neutral conductor, N, is

connected instead of the Test lead input jacks.

5. Refer to Figure 1 (Shown on the back of the Meter) for more information.

6.2. Non-Contact Rotary Field Indication

1. Disconnect all test leads from the Meter.

2. As shown in Figure 2, position the MT935 on the motor so that it is

parallel to the length of the motor shaft, the meter should be at least 1

inch away from the motor.

3. Press the ON/OFF Button, the green ON indicator shows that the

instrument is ready for testing.

4. Either the Clockwise or Counter Clockwise Rotary indicator illuminates

showing the type of rotary field direction present.

Note: The indicator will not operate with engines controlled by frequency

converters. The bottom of the Meter should be oriented towards

the drive shaft. See the Orientation Symbol on the Meter.

See Table for the minimum motor diameter and number of pole pair to

obtain a reliable test result.

Number of Rotary Number of Rotary Angle Between Min. Ø of

Pole Pair Field (1/min)at Frequency (Hz) Poles Motorcase

16 2/3 50 60 ˚ cm

1 1000 3000 3600 60 5.3

2 500 1500 1800 30 10.7

3 333 1000 1200 20 16.0

4 250 750 900 15 21.4

5 200 600 720 12 26.7

6 167 500 600 10 32.1

8 125 375 450 7.5 42.8

10 100 300 360 6 53.5

12 83 250 300 5 64.2

16 62 188 225 3.75 85.6

Figure 1 Figure 2

6.3. Determine the Motor Connection

1. Connect one end of the test leads to the Meter, make sure the L1, L2

and L3 test leads are connected to the corresponding jack.

2. Connect the alligator clamps to the other end of the test leads.

3. Connect the alligator clamps to the motor connections, L1 to U, L2 to V,

L3 to W.

4. Press the ON/OFF Button, the green ON indicator shows that the

instrument is ready for testing.

5. Turn the motor shaft half a revolution towards the right.

Note: The bottom of the Meter should be oriented towards the drive

shaft. See the Orientation Symbol on the Meter.

Note: Either the Clockwise or Counter Clockwise Rotary indicator

illuminates showing the type of rotary field direction present.

6.4. Magnetic Field Detection

• To detect a magnetic field, place the Motor and Phase Rotation

indicator to a solenoid valve.

• A magnetic field is present if either the Clockwise or the Counter

Clockwise Rotary indicator illuminate.

7. BATTERY REPLACEMENT

This Meter uses a 9V battery. To replace the battery, follow these steps.

1. Place the LCD side of the Meter down on a non-abrasive surface.

2. With a screwdriver, loosen the screw of the battery compartment and

remove the lid. Remove the old batteries.

3. Insert the new batteries while observing the battery polarity shown in

the battery compartment.

4. Secure the battery compartment lid back in position with the screw.

Note: The Meter contains alkaline batteries. Do not dispose of these

batteries with other solid waste. Used batteries should be disposed

of by a qualified recycle or hazardous materials handler.

Nominal Voltage Rotary Direction 1 to 400V AC

Nominal Voltage Phase Indirection 120 to 400V AC

Frequency Range (fn) 2 to 400Hz

Test Current (In per phase) Less than 3.5mA

8. SPECIFICATIONS

8.1. Determine Rotary Field Direction

Function Range

Frequency Range (fn) 2 to 400Hz

8.2. Non-Contact Rotary Field Indication

Function Range

Nominal Test Voltage (U me) 1 to 400V AC

Nominal Test Current (In per phase) Less than 3.5mA

Frequency Range (fn) 2 to 400Hz

8.3. Determine the Motor Connection

Function Range

Battery 9V alkaline, IEC 6LR61

Current Consumption Max 20mA

Battery life Minimum 1 year for average use

8.4. Electrical Specifications

Function Range

Electrical Safety Meets DIN VDE 0411,IEC 61010

DIN, VDE 0413-7, IEC 61557-7/EN

61557-7

Maximum Operating Voltage (Ume) 400V AC for all ranges

Protection Levels CAT III 1000V and CAT IV 600V

8.5. Safety Specifications

Function Range

Operating Temperature 0°C to 40°C

Operating Humidity 15% to 80%RH

Operating Altitude 2000m

Pollution Degree 2

Type of Protection IP40

8.6. Environmental

Function Range

Size (HxWxD) 135x75x31mm

Weight (With the battery) 174g

8.7. Mechanical Specifications

Function Range

www.major-tech.com www.majortech.com.au

[email protected] [email protected]

MAJOR TECH (PTY) LTD

South Africa Australia

Table des matières

Autres manuels Major tech Instrument de mesure

Major tech

Major tech MT790 Manuel utilisateur

Major tech

Major tech MT 770 Manuel utilisateur

Major tech

Major tech MT123 Manuel utilisateur

Major tech

Major tech MT941 Manuel utilisateur

Major tech

Major tech MT960 Manuel utilisateur

Major tech

Major tech MT935 Manuel utilisateur

Major tech

Major tech MT941 Manuel utilisateur

Major tech

Major tech MT760 Manuel utilisateur

Major tech

Major tech MT26 Manuel utilisateur

Major tech

Major tech MT715 Manuel utilisateur

Major tech

Major tech MT350 Manuel utilisateur

Major tech

Major tech MT150 Manuel utilisateur

Major tech

Major tech MT767 Manuel utilisateur

Major tech

Major tech MT942 Manuel utilisateur

Major tech

Major tech MT876 Manuel utilisateur

Major tech

Major tech MTD75T Manuel utilisateur

Major tech

Major tech MT945 Manuel utilisateur

Major tech

Major tech MT145 Manuel utilisateur

Major tech

Major tech MT90 Manuel utilisateur

Major tech

Major tech MT943 Manuel utilisateur

Major tech

Major tech MT782 Manuel utilisateur

Major tech

Major tech MT920 Manuel utilisateur

Major tech

Major tech MT975 Manuel utilisateur

Major tech

Major tech MT745 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur