LUX KONO Manuel utilisateur
Installaon Manual
Smart
THERMOSTAT
Thanks for inving KONOTM into your home. The setup process is easy.
All you need to do is follow these simple steps and you’ll be on your
way to saving energy and making your home even more comfortable.
LUX Products oers installaon and product videos
Please visit LuxProducts.com/videos or visit our YouTube channel
LUX Products Corporaon. To contact LUX Technical Support please call
856.234.8803.
Para ver estas instrucciones en español, por favor visite
LuxProducts.com/KONOmanualsSP
[Drill]
LuxProducts.com | 3
Tools Needed
Table of Contents
1. Start Here ......................................................................................2-6
2. Installing with a C-Wire................................................................7-10
3. Installing without a C-Wire ........................................................11-14
4. Connecng to the Network .......................................................15-19
5. Appendix....................................................................................20-23
KONO Smart
Drill Oponal: Wire Stripper SmartphonePhillips Screwdriver
1. START HERE
LUX Power BridgeTM
Wiring Labels
What’s in the box?
Screws Wall Anchors
Trim Plate
4 | 856.234.8803
Behind KONO’s Décor-snapTM cover you will see a small, removable
“quick guide” to installaon and an icon-key label. The icons represent
the display icons of your KONO Smart. You will also nd important
informaon for HomeKitTM and WiFi setup.
This manual is a comprehensive guide to installaon and wiring.
Press the knob when the thermostat is idle to
view the menu. Rotate the knob to select an
opon and press again to conrm.
System Mode Installaon
Sengs
Fan Mode Network
Connecon
Run Schedule System
Preparing
For more informaon about
installaon sengs, please visit
LuxProducts.com/KONOmanual
LuxProducts.com | 5
Step 1.1: Download the LUX Products App to your mobile device and
create an account.
Step 1.2: Now set your phone aside and turn o the power
at the circuit breaker to both your heang and cooling
systems before performing any wiring.
Step 1.3: Conrm that your heang and cooling system is powered
down by changing the temperature on your thermostat.
Hint: Your system should not make any noise and you should not feel
any air exing your vents.
Step 1.4: Remove the front of your old thermostat
from its base. If you see thick black wires, wire
nuts, or any labels that say 120-240VAC or High
Voltage, your system is not compable with KONO
Smart. Please call LUX Technical Support at
856.234.8803 before proceeding with your
installaon. If you do not see any high voltage labels
or wires, you can connue with your installaon.
1. START HERE
HIGH
VOLTAGE
6 | 856.234.8803
Step 1.5: Use the included wire labels to mark which wire is connected
to each terminal in your old thermostat. Take a picture of your current
wiring layout – it may be helpful to reference this picture later.
Step 1.6: Conrm if you have a C-Wire. If you do, please turn to the
next page. If you do not, please skip ahead to page 11.
LuxProducts.com | 7
INSTALLATION WITH
C-WIRE2.
Installing with a C-wire
Before starng
Turn o the power at the circuit breaker to
both your heang and cooling systems before
performing any wiring. You will not need the
included LUX Power Bridge.
STOP
8 | 856.234.8803
Installaon with C-wire
Step 2.1: Idenfy your system conguraon (see wiring diagrams in
appendix). Potenal conguraons include:
• Convenonal 1H/1C (Y, G, W, R, C)
• Convenonal 2H/1C (Y, G, W, W2, R, C)
• Heat Pump Single-Stage (Y, G, R, O/B, C)
• Heat Pump with auxiliary heat or dual fuel (Y, G, R, O/B, W, C)
If you have only one R wire, please use the RH terminal. If you have a
dierent conguraon other than what is listed above, please call LUX
Technical Support for help with your installaon.
Step 2.2: Remove each wire from its terminal – make sure that they
don’t fall down back into the wall.
Step 2.3: Remove the mounng screws from the base of the old
thermostat. Remove the base from the wall.
Step 2.4: If you would like to use the trim plate or wall anchors,
you can install them now.
Step 2.5: Separate KONO Smart from its
base. Pull the wires from your wall through
the center hole of the KONO Smart base.
Secure the base to the wall using the
included mounng hardware.
LuxProducts.com | 9
Opon 1 - Convenonal (furnace) Systems:
Step 2.6f: Following the terminal labels
marked “Convenonal” on the thermostat
base, press the lever and insert each
labeled wire into the top hole of the
corresponding terminal.
Step 2.7f: If you have both an RC and RH wire present, then remove the
red cap next to the reset buon. You can now skip ahead to step 2.8.
Opon 2 - Heat Pump Systems:
Step 2.6hp: Following the terminal labels
marked “Heat Pump” on the thermostat base
and referencing your wiring photo, press the
lever and insert each labeled wire into the top
hole of the corresponding terminal.
If your old thermostat did not have a W1 wire but did have a W2 wire,
please insert the W2 wire into the W1 terminal.
Step 2.7hp: If you have both an O wire and a B wire
(i.e. in a Trane system), please install the B wire to the “C” terminal.
For more detailed direcons, please see the wiring diagrams in the
appendix or call LUX Technical Support.
INSTALLATION WITH
C-WIRE2.
CONVENTIONAL C W1 W2
HEAT PUMP C W1 OB
POWER BRIDGE 1 4 2
CONVENTIONAL C W1 W2
HEAT PUMP C W1 OB
POWER BRIDGE 1 4 2
10 | 856.234.8803
Installaon with C-wire
Step 2.8:
Securely fasten KONO Smart onto its base. Once it has clicked
into place, return power to your heang and cooling system.
Step 2.9: Aer your thermostat powers up, you are ready to congure
KONO Smart for your heang and cooling system and connect to a
wireless network.
Please skip ahead to the “Connecng to the Network” secon of this
manual on page 15.
Table des matières
Autres manuels LUX Thermostat
LUX
LUX SMART TEMP WIN100 Series Manuel utilisateur
LUX
LUX TX9600TS Manuel utilisateur
LUX
LUX 105/2110 Series Manuel utilisateur
LUX
LUX TX100E Manuel utilisateur
LUX
LUX TX1500B SERIES Manuel utilisateur
LUX
LUX 120-1141 Manuel utilisateur
LUX
LUX KONOz Manuel utilisateur
LUX
LUX DMH110b Manuel utilisateur
LUX
LUX ELV4d Manuel utilisateur
LUX
LUX TX9100Ua SMART TEMP Manuel utilisateur
LUX
LUX T40-1143 Manuel utilisateur
LUX
LUX DMH110b Manuel utilisateur
LUX
LUX TX100Ea Manuel utilisateur
LUX
LUX ELV4 Mode d'emploi
LUX
LUX SMART TEMP TX1500Ua Manuel utilisateur
LUX
LUX SMART TEMP TX9100U Manuel utilisateur
LUX
LUX LP0511D Manuel utilisateur
LUX
LUX CAG1500 Series Manuel utilisateur
LUX
LUX KONOz Instructions d'utilisation
LUX
LUX KONOzw Manuel utilisateur
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
