Lutron Electronics MAESTRO MS-OPS2 Manuel utilisateur

Custom Settings for Maestro®Occupancy Sensing Switches

Application Note #461

Revision B

August 2012

1 Technical Support — 800.523.9466

Model Numbers

MS-OPS2 MS-VPS2

MS-OPS5M MS-VPS5M

MS-OPS6M2-DV MS-VPS6M2-DV

MS-OPS6M2N-DV MS-VPS6M2N-DV

Overview

Maestro®Occupancy sensing switches have custom settings that can be adjusted to the user’s preference. The

settings include Timeout, Sensor Mode, and Advanced Settings (see the Custom Settings section for descriptions of

these settings).

General Instructions

Setting options vary depending on model number. Use the model number to identify which options are available and

then follow the instructions under each Custom Settings table.

Read all instructions before proceeding.

1. Press and hold the button(s) indicated in the picture below.

2. The lens will flash once at each setting; it will always start at setting 1.

3. The setting will be saved after releasing the button(s).

On/Off Button

Auxiliary Button

Lens

Application Note #461

2 www.lutron.com

Custom Settings

Select your preferred settings from the instructions on the following pages before proceeding; default settings are

shown in bold.

Note: User is required to remove the wallplate in order to gain access to the Auxiliary button.

Timeout

• Timeout is the delay until light turns off after a room is vacated.

• Test Mode is a temporary, short timeout (less than 15-seconds) that can be used to test the sensor’s coverage. After

entering test mode, the device will exit test mode automatically after 5 minutes, or when any button is pressed. If no

motion is detected for more than 15 seconds, the light will turn off. If motion is detected, the light will turn on and

continue to stay on for as long as motion is detected. The lens will flash periodically, indicating that motion has been

detected.

Model Numbers

MS-OPS2 MS-VPS2

MS-OPS5M MS-VPS5M

Number

of flashes

1Test mode

21 minute

35 minutes

415 minutes

530 minutes

Example 1a: Changing the Timeout to 15 minutes

1. Press and hold the On/Off button.

2. Release the button after the lens flashes for the fourth

time.

Model Numbers

MS-OPS6M2-DV MS-VPS6M2-DV

MS-OPS6M2N-DV MS-VPS6M2N-DV

Number

of flashes

1Test mode

21 minute

35 minutes

415 minutes

530 minutes

Example 1b: Changing the Timeout to 30 minutes

1. Press and hold the On/Off button.

2. Release the button after the lens flashes for the fifth

time.

Application Note #461

3 Technical Support — 800.523.9466

Sensor Mode

• Auto-On Daylight Sensing is the mode in which the light turns on only if natural light in the room is low. If the switch

turns on when there is enough natural light, or if the switch does not turn on when there is not enough natural light,

press the On/Off button within 5 seconds of entering the room. Over time, this interaction will “teach” the switch your

preferred setting.

• Manual Off-While-Occupied is a feature that can be enabled or disabled to accommodate different lighting scenarios.

– Enabled: When the occupancy sensing switch is manually turned off, the light will turn off and remain off while the

room is occupied (e.g., during the viewing of a presentation in a conference room or classroom).

– Disabled: When the occupancy sensing switch is manually turned off, the light will turn off. After 25 seconds have

elapsed, the light will turn on and remain on for as long as the occupancy sensor detects motion in the room.

Manual Off-While-Occupied Actions

Sequence of Events Enabled Disabled

Room is occupied Light is ON Light is ON

Occupancy sensing switch is manually turned off Light turns OFF Light turns OFF

Room remains occupied Light remains OFF Light turns ON after 25seconds

Room is vacated Light remains OFF Light remains OFF

Timeout period expires Light remains OFF Light turns OFF

Room becomes occupied Light turns ON Light turns ON

Model Numbers

MS-OPS6M2-DV

MS-OPS6M2N-DV

Number

of flashes

1Auto-On and Auto-Off (Occupancy mode);

Off-while-occupied ENABLED

2Manual-On and Auto-Off (Vacancy mode)

3Auto-On daylight sensing and Auto-Off;

Off-while-occupied ENABLED

4Auto-On and Auto-Off (Occupancy mode);

Off-while-occupied DISABLED

Model Numbers

MS-OPS2

MS-OPS5M

Number

of flashes

1Auto-On and Auto-Off (Occupancy mode);

Off-while-occupied DISABLED

2Manual-On and Auto-Off (Vacancy mode)

3Auto-On daylight sensing and Auto-Off;

Off-while-occupied ENABLED

4Auto-On and Auto-Off (Occupancy mode);

Off-while-occupied ENABLED

Example 2: Changing the Sensor Mode to Auto-On Daylight Sensing and Manual Off-While-Occupied enabled.

1. Press and hold the Auxiliary button.

2. Release the button after the lens flashes for the third time.

Application Note #461

Advanced Settings

Model Numbers

MS-OPS2 MS-VPS2

MS-OPS5M MS-VPS5M

MS-OPS6M2-DV MS-VPS6M2-DV

MS-OPS6M2N-DV MS-VPS6M2N-DV

Number

of flashes

1Motion sensitivity low

2Motion sensitivity high

3Return all settings to default

Example 3: Changing to Low Sensitivity

1. Press and hold On/Off and Auxiliary buttons simultaneously.

2. Release both buttons after the lens flashes for the first time.

Lutron Contact Numbers

Maestro is a registered trademark of Lutron Electronics Co., Inc.

WORLD HEADQUARTERS

USA

Lutron Electronics Co., Inc.

7200 Suter Road

Coopersburg, PA 18036-1299

TEL: +1.610.282.3800

FAX: +1.610.282.1243

Toll-Free: 1.888.LUTRON1

Technical Support: 1.800.523.9466

[email protected]

North & South America

Technical Hotlines

USA, Canada, Caribbean:

1.800.523.9466

Mexico:

+1.888.235.2910

Central/South America:

+1.610.282.6701

EUROPEAN HEADQUARTERS

United Kingdom

Lutron EA Ltd.

6 Sovereign Close

London, E1W 3JF United Kingdom

TEL: +44.(0)20.7702.0657

FAX: +44.(0)20.7480.6899

FREEPHONE (UK): 0800.282.107

Technical Support: +44.

(0)20.7680.4481

[email protected]

ASIAN HEADQUARTERS

Singapore

Lutron GL Ltd.

15 Hoe Chiang Road

#07-03, Tower 15

Singapore 089316

TEL: +65.6220.4666

FAX: +65.6220.4333

Technical Support: 800.120.4491

lutronsea@lutron.com

Asia Technical Hotlines

Northern China: 10.800.712.1536

Southern China: 10.800.120.1536

Hong Kong: 800.901.849

Indonesia: 001.803.011.3994

Japan: +81.3.5575.8411

Macau: 0800.401

Taiwan: 00.801.137.737

Thailand: 001.800.120.665853

Other Countries: +65.6220.4666

Lutron Electronics Co., Inc.

7200 Suter Road

Coopersburg, PA 18036-1299 U.S.A.

P/N 048461 Rev. A8/2012

Autres manuels pour MAESTRO MS-OPS2

Ce manuel convient aux modèles suivants

Autres manuels Lutron Electronics Changer

Lutron Electronics

Lutron Electronics MAESTRO MS-A202 Manuel utilisateur

Lutron Electronics

Lutron Electronics Switch Manuel utilisateur

Lutron Electronics

Lutron Electronics Nova T NT-1PS Manuel utilisateur

Lutron Electronics

Lutron Electronics seeTouch SG-2W Manuel utilisateur

Lutron Electronics

Lutron Electronics MAESTRO MS-OPS2 Manuel utilisateur

Lutron Electronics

Lutron Electronics Maestro MS-OPS5M Manuel utilisateur

Lutron Electronics

Lutron Electronics RadioRA 2 Guide de configuration rapide

Lutron Electronics

Lutron Electronics Maestro MS-OPS6M2N-DV Manuel utilisateur

Lutron Electronics

Lutron Electronics MAESTRO MS-OPS6M2-DV Manuel utilisateur

Lutron Electronics

Lutron Electronics FS-5F Manuel utilisateur

Lutron Electronics

Lutron Electronics Softswitch128 Manuel utilisateur

Lutron Electronics

Lutron Electronics Nova T NT-2WS-AU Manuel utilisateur

Lutron Electronics

Lutron Electronics Stanza SZ-1SD Manuel utilisateur

Lutron Electronics

Lutron Electronics Maestro MS-A202 Manuel utilisateur

Lutron Electronics

Lutron Electronics Maestro MS-OPS6-DDV Manuel utilisateur

Lutron Electronics

Lutron Electronics Maestro MS-OPS5M Manuel utilisateur

Lutron Electronics

Lutron Electronics Maestro MRF2S-8SD010 Manuel utilisateur

Lutron Electronics

Lutron Electronics MAESTRO MRF2-8S-DV Manuel utilisateur

Lutron Electronics

Lutron Electronics Maestro MS-OPS5M Manuel utilisateur

Lutron Electronics

Lutron Electronics Maestro MS-OPS6M2U-DV Series Manuel utilisateur

Lutron Electronics

Lutron Electronics Maestro MS-B202 Manuel utilisateur

Lutron Electronics

Lutron Electronics Qoto Q-1PS Manuel utilisateur

Lutron Electronics

Lutron Electronics Maestro MS-VPS5M Manuel utilisateur

Lutron Electronics

Lutron Electronics MAESTRO MS-OPS2 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur