Lutron Electronics UV-340A Manuel utilisateur

UV LIGHT METER

Model : UV-340A

our purchase of this UV

LIGHT METER marks a

step forward for you

into the field of

precision measurement.

Although this METER is

a complex and delicate

instrument, its durable

structure will allow

many years of use if

proper operating

techniques are

developed. Please read

the following

instructions carefully

and always keep this

manual within easy

reach.

OPERATION MANUAL

Stora

e for the " UV sensor "

UV sensor is with extremely

precise structure. Once don't

use it , be sure to store it in

the dry environment. For

example, put the whole sensor

including Desiccant ( Drier )

into to the Plastic bag and seal

the bag as tightly as possible

( refer the following figure ).

Take the sensor out of the bag only when use it.

Comply to above method will extend the life of UV

sensor. Otherwise, the gain of the UV SENSOR may

be decreased and shorten the calibration period. It is

also necessary to replace the Desiccant ( Drier )

periodically.

TABLE OF CONTENTS

1. FEATURES................................................................1

2. APPLICATIONS......................................................... 1

3. SPECIFICATIONS......................................................2

4. FRONT PANEL DESCRIPTION....................................

4-1 Display.............................................................. 3

4-2 Power Button.................................................... 3

4-3 Range Switch (Hi/Lo Switch)................................3

4-4 Zero Button....................................................... 3

4-5 Stand.................................................................

4-6 Battery Compartment/Cover................................ 3

4-7 UV Probe Handle.............................................. 3

4-8 UV Sensor........................................................ 3

5. MEASURING PROCEDURE..........................................4

6. MEASURING CONSIDERATION..................................

7. BATTERY REPLACEMENT...........................................5

1. FEATURES

* Professional, high quality UV meter.

* Ultra-violet irradiation measurement for UVA & UVB.

* UV detector spectrum from 290 nm to 390 nm.

* Hi, Lo measurement range. 19990 and 1999 uW/cm^2.

* Exclusive UV sensor structure.

* Sensor with cosine correction filter.

* Build Zero button.

* Microprocessor circuit provides high reliability and

durability.

* Separate UV LIGHT probe allows user to measure the

UV light at an optimum position.

* LCD display, easy readout.

* Heavy duty & compact housing case.

2. APPLICATIONS

Industrial

* Monitoring blue light radiation hazards in welding.

* UV sterilization

*Graphicarts.

* Photochemical matching.

* UV EPROM erasure.

* Photoresist exposure.

* Curing of inks, adhesives and coatings.

Laboratory

* Weathering " degradation studies."

* UV sterilization

* Virology.

* Microbial genetics.

* DNA research. * Biologic hoods.

* General laboratory use. 1

3. SPECIFICATIONS

Display LCD size : 18 mm x 45 mm.

Maximum indication 1999.

Measurement

2 ranges : Hi & Lo range

ranges & Lo range : 1999 uW/cm^2 x 1 uW/cm^2

resolution Hi range : 19990 uW/cm^2 x 10 uW/cm^2

* 1000 uW/cm^2 = 1 mW/cm^2

UV sensor Band pass 290 nm to 390 nm.

spectrum

Accuracy ± ( 4 % FS + 2 dgt ) FS : full scale

* Calibration is executed under the UVA light &

and compare with the standard UVA light meter.

* Spec. tested under the environment RF Field

Strength less than 3 V/M & frequency less than the

30 MHz only.

Sensor structure The exclusive UV photo sensor with

the cosine correction filter.

Buttons. Switch Power button, Zero button, Range switch

Sample Time Approx. 1 sec.

Over Range

Indication of " ".

indication

Weight 251 g / 0.55 LB (including battery)

Operating Temp. 0 to 50 .℃

Operating Less than 85% R.H.

Humidity

Power Supply DC 9V battery, 006P , MN 1604 (PP3)

or equivalent.

Power Approx. DC 6 mA.

Consumption

Size Main instrument : 131 x 70 x 25 mm.

Sensor probe head : 45 mm dia x 32 mm.

Sensor probe handle : 125 x 24 mm dia.

Accessories Instruction manual........... 1 PC.

Included UV sensor probe.............. 1 PC.

Optional Acc. Soft carrying case, CA-52A, CA-03.

4. FRONT PANEL DESCRIPTION

4-1 Display

4-2 Power Button

4-3 Range Switch (Hi/Lo Switch)

4-4 Zero Button

4-5 Stand

4-6 Battery Compartment/Cover

4-7 UV Probe Handle

4-8 UV Sensor

5. MEASURING PROCEDURE

1)Push the " Power Button ( 4-2, Fig. 1 ) continuously until

the " Display " ( 4-1, Fig. 1 ) on then release the " Power

Button : will power ON the meter.

* After power ON if push the " Power Button ( 4-2, Fig. 1 )

once a while again will power OFF the meter.

2)Select the max. range on the " Range Switch "

( 4-3, Fig. 1 ).

Lo range : 1999 uW/cm^2 x 1 uW/cm^2

Hi range : 19990 uW/cm^2 x 10 uW/cm^2

* 1000 uW/cm^2 = 1 mW/cm^2

3)Hold the " Probe Handle " ( 4-7, Fig. 1 ) & let " UV Sensor"

( 4-8, Fig. 1 ) face to measuring UV light source , then the

Display ( 4-1, Fig. 1 ) will show values of UV light on the

display reading.

6. MEASURING CONSIDERATION

1)As the " Lo range " is designed & to measure the UV light

values more than 2000 uW/cm^2 . If the measured UV light

values more than 1999 uW/cm^2, it should select the " Range

Switch " to the " Hi range " to get the exact measuring value.

Under the " Lo range " if the " Display show " ", it

means the measurement value already over range, then

should select the " Range Switch " ( 4-3. Fig. 1 ) to the

" Hi " position ( 19990 uW/cm^2 range ).

)

Zero Button ( 4-4, Fig. 1 ) can be operated under the

Lo range ( 1999 uW/cm^2 range ) and the display

value 100 uW/cm^2 only.≦

2)Storage for the " UV sensor "

UV sensor is with extremely precise structure.

Once don't use it , be sure to store it in the dry environment.

For example, put the whole sensor including Desiccant

( Drier ) into to the Plastic bag and seal the bag as tightly

as possible. Take the sensor out of the bag only when use

it. Comply to above method will extend the life of UV

sensor. Otherwise, the gain of the UV SENSOR may be

decreased and shorten the calibration period. It is also

necessary to replace the Desiccant ( Drier ) periodically.

7. BATTERY REPLACEMENT

When LCD display shows " " in the left corner,

It is necessary to replace the battery. However, in-spec

measurement may still be made for several hours after

low battery appears.

2)Slide the " Battery Cover " ( 4-6, Fig. 1 ) away from the

instrument and remove the battery.

3)Replace with 9V battery and reinstate the cover.

4)Make sure the battery cover is secured after changing the

battery.

50806-UV340A

Table des matières

Autres manuels Lutron Electronics Instrument de mesure

Lutron Electronics

Lutron Electronics VB-8213 Manuel utilisateur

Lutron Electronics

Lutron Electronics CL-2006 Manuel utilisateur

Lutron Electronics

Lutron Electronics YK-37UVSD Manuel utilisateur

Lutron Electronics

Lutron Electronics CD-4317SD Manuel utilisateur

Lutron Electronics

Lutron Electronics GCO-2008 Manuel utilisateur

Lutron Electronics

Lutron Electronics PH-222 Manuel utilisateur

Lutron Electronics

Lutron Electronics MHT-381SD Manuel utilisateur

Lutron Electronics

Lutron Electronics GC-2028 Manuel utilisateur

Lutron Electronics

Lutron Electronics SL-4023SD Manuel utilisateur

Lutron Electronics

Lutron Electronics PCO-350 Manuel utilisateur

Lutron Electronics

Lutron Electronics CM-9930R Manuel utilisateur

Lutron Electronics

Lutron Electronics SL-4010 Manuel utilisateur

Lutron Electronics

Lutron Electronics DM-9027T Manuel utilisateur

Lutron Electronics

Lutron Electronics DT-2234BL Manuel utilisateur

Lutron Electronics

Lutron Electronics YK-2001PHA Manuel utilisateur

Lutron Electronics

Lutron Electronics SP-82AC Manuel utilisateur

Lutron Electronics

Lutron Electronics CO2-9914SD Manuel utilisateur

Lutron Electronics

Lutron Electronics LM-81LX Manuel d'installation

Lutron Electronics

Lutron Electronics EMC-9400SD Manuel utilisateur

Lutron Electronics

Lutron Electronics PM-9107 Manuel utilisateur

Lutron Electronics

Lutron Electronics VB-8206SD Manuel utilisateur

Lutron Electronics

Lutron Electronics AM-4233SD Manuel utilisateur

Lutron Electronics

Lutron Electronics PCD-431 Manuel utilisateur

Lutron Electronics

Lutron Electronics DW-6064 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur