LONGER LK1 Manuel utilisateur

www.longer3d.com [email protected]

LONGER LK1/LK4/LK4Pro/LK5Pro/Cube2 &

Cura4.4 User Guides

2020-09-29

www.longer3d.com [email protected]

Contents

Contents......................................................................................................I

1.Install Software.................................................................................... 2

1.1Open the software installation package and enter the

"Welcome Page"..................................................................................2

1.2About user agreement, software introduction, data sharing

content:................................................................................................. 3

1.3 According to your Model.Add a Printer....................................4

2.Quick use: Slicing Software...............................................................5

2.1Add Model...................................................................................... 5

2.2Set up the Model........................................................................... 6

2.3Select Printing Parameters........................................................... 7

8. FAQ.........................................................................................................8

www.longer3d.com [email protected]

1.Install Software

1.1Open the software installation package and enter the "Welcome Page"

www.longer3d.com [email protected]

1.2About user agreement, software introduction, data sharing content:

www.longer3d.com [email protected]

1.3 According to your Model.Add a Printer

[1]Cube2 model, please modify the print size

and uncheck the hot bed setting

www.longer3d.com [email protected]

2.Quick use: Slicing Software

2.1Add Model

Click the "Open File" icon in the upper left corner of the interface, select the model to be printed, and the model

will appear in the software.

www.longer3d.com [email protected]

2.2Set up the Model

Left-click to select the model, and the edit frame on the right will become optional items, and the model can be

set up, zoomed, mirrored, and support area.

www.longer3d.com [email protected]

2.3Select Printing Parameters

Click the frame in the upper right corner, select the corresponding printing layer thickness, filling, support, and

Adhesion, and click "Slice" in the lower right corner. When the slicing is completed, the Gcode file can be saved to

the Micro SD card and inserted into the printer for printing.

www.longer3d.com [email protected]

8. FAQ

How to solve

automatic unloading

of filament

1) Star-G-code Replacement

; -- START GCODE --

G21 ;metric values

G90 ;absolute positioning

M82 ;set extruder to absolute mode

M107 ;start with the fan off

G28 X0 Y0 ;move X/Y to min endstops

G28 Z0 ;move Z to min endstops

G1 Z1 F1000 ;move up slightly

G92 E0

G1 Y60.0 Z0 E9.0 F1000.0;intro line

G1 Y100.0 E21.5 F1000.0 ;continue line

G92 E0 ;zero the extruded length again

G1 F80

;Put printing message on LCD screen

M117 Printing...

; -- end of START GCODE --

How to solve unable

to connect to printer

1) “AutoDetectBaudJob.py ”Replacement

https://drive.google.com/open?id=1P0AO6w3WCYMrLWhIPb3XoxIrjg4_Fqm7

https://drive.google.com/open?id=1VeoTU4RIrx-EUwmA7G5sweaPux4-1Xl_

Autres manuels pour LK1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels LONGER Imprimante 3D

LONGER

LONGER Cube2 Manuel utilisateur

LONGER

LONGER Orange120 Manuel utilisateur

LONGER

LONGER LK1 Manuel utilisateur

LONGER

LONGER Orange30 Manuel utilisateur

LONGER

LONGER LK5Pro Manuel utilisateur

LONGER

LONGER LK4 Pro Manuel utilisateur

LONGER

LONGER Orange10 Guide d'installation

LONGER

LONGER Orange10 Manuel utilisateur

LONGER

LONGER RAY5 Manuel utilisateur

LONGER

LONGER LK4 Manuel utilisateur

LONGER

LONGER LK4 Pro Manuel utilisateur

LONGER

LONGER LK2 Manuel utilisateur

LONGER

LONGER LK4 X Manuel utilisateur

LONGER

LONGER LK4 Manuel utilisateur

Manuels Imprimante 3D populaires d'autres marques

Ultimaker

Ultimaker S5 Material Station Manuel utilisateur

EcubMaker

EcubMaker TOYDIY Manuel utilisateur

AnyCubic

AnyCubic Kossel Plus Manuel utilisateur

ReDeTec

ReDeTec ProtoCycler Manuel utilisateur

Kywoo3D

Kywoo3D Tycoon IDEX Manuel utilisateur

CraftBot

CraftBot PLUS PRO Manuel utilisateur

3DGence

3DGence INDUSTRY F340 Manuel utilisateur

HP Jet Fusion 4200 Mode d'emploi

Rokit

Rokit AEP Series Manuel utilisateur

AnkerMake

AnkerMake M5 Manuel utilisateur

DIYElectronics

DIYElectronics PRUSA I3 Instructions de montage

Ackuretta

Ackuretta FreeShape 120 Manuel utilisateur

Stratasys

Stratasys J850 Manuel utilisateur

MakerBot

MakerBot Replicator Manuel utilisateur

Stratasys

Stratasys FDM Vantage Series Manuel utilisateur

ZYYX

ZYYX Pro II Manuel utilisateur

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guide de l'utilisateur

German RepRap

German RepRap X400 Pro V3 Manuel utilisateur