Lockly DEADBOLT EDITION 7S Manuel utilisateur

DEADBOLT EDITION

INSTALLATION

GUIDE

MODEL 7S

Go to Lockly.com/installation to watch a video

version of this installation guide.

Download the BILT app from the App Store or on

Google Play for step-by-step interactive 3-D

walk-through installation instructions.

Welcome!

This guide will walk you through step-by-step how to

install and get your Lockly up and running. Installation

generally takes less than 30 minutes. If you have any

questions please reference our online support at:

Lockly.com/support or call (669) 500-8835 for help.

Preparation

Prepare door: remove existing deadbolt or use provided template to bore new holes.

Phillips Screwdriver

To complete the installation you will need:

Flathead Screwdriver Tape measure or ruler

1-⅜" (35mm)

to 2" (50mm)

1" (25mm)

2-⅜" (60mm)

2-¾" (70mm)

Cross-bore

2-⅛" (54mm)

*Optional

* Use goggles to protect eyes if you need to drill door holes.

ADJUST DEADBOLT AND INSTALL

Step 1

Deadbolt slot must align to the center of the door hole. Adjust as shown if needed.

The deadbolt comes set to 2-3/4" (70mm). Adjust length to 2-3/8” (60mm) if necessary.

(wear gloves to protect from possible pinching).

Hold the metal plate and

twist the deadbolt body

clockwise till it snaps to 2-3/8"

Deadbolt comes set at 2-3/4"

(70mm). To return to default,

while deadbolt is extend-

ed, hold the metal plate

and twist the deadbolt body

counter-clockwise till it

snaps to 2-3/4"

Push the crank to

extend the deadbolt

2-3/4" (70mm)

or 2-3/8” (60mm)

ADJUST DEADBOLT AND INSTALL

Step 1

continued

Extend the deadbolt by inserting a

flat-head screwdriver into the slot and

turning clockwise.

Insert the deadbolt into mortise flush with

door edge, make sure that the right side is

up and the slot is in the vertical position.

Secure with 2 screws.

(2X)

Peel film from adhesive strips and make sure torque blade is in the vertical position with

the deadbolt extended. Place assembly and torque blade through the deadbolt slot and

guide connection cables through the cross-bore hole under the deadbolt as shown.

Complete mounting by aligning and securing until flush to exterior door surface.

Peel paper off the

Adhesive tape

EXTERIOR VIEW

(1)

Check the exterior assembly (B)

alignment to door hole and deadbolt

before peeling off film on adhesive strips.

INSTALLING THE EXTERIOR ASSEMBLY

Step 2

Vertical

Extended

Under

1: Check interior mounting plate (K)

alignment to your door hole before

securing with adhesive strips.

4: Use the key to ensure deadbolt locks

and unlocks smoothly (no binding or rubbing).

IMPORTANT: when finished, leave the dead-

bolt extended and remove the key before

proceeding to the next step.

2: Align and secure mounting plate with

adhesive strips. Guide connection cables

through the hole and secure to the lower

left notched hole.

INSTALLING THE INTERIOR ASSEMBLY (F)

Step 3

(2X)

3: Insert and tighten by hand 2

screws located on the left and right

of the blade. Check alignment and

tighten with screwdriver until mounting

plate is securely placed on door.

Remove key when finished

Leave deadbolt extended

TIP: when installing screws by hand, turn screws clockwise several turns then

counterclockwise one turn to ensure smooth threading and no cross threading.

INSTALLING THE INTERIOR ASSEMBLY (F)

Step 3

continued

NOTE: If you need to discon-

nect the cable, make sure

to press the snap tab to

release the plug before

carefully pulling it out. Do

not force, as this may result

in damaging the lock.

Plug the cable coming through mounting plate into the interior assembly as

shown. Tuck cable under eyelet hooks and route to the right on interior assembly .

Plug into , match red side

of plug with red on socket - insert

tightly.

D F

INSTALLING THE INTERIOR ASSEMBLY (F)

Step 3

continued

RESET

PROGRAM

Before placing the interior

assembly onto the mount-

ing plate, ensure the

thumb turn is vertical.

Place the interior assembly

against the mounting plate

and make sure the torque

blade is inserted to the thumb

turn shaft.

Secure the interior assembly

to mount platedoor with

2 screws.

Torque Blade Thumb turn shaft

Align torque blade with thumb

turn shaft, make sure both are in

the vertical position.

RESET

PROGRAM

RESET

PROGRAM

Autres manuels pour DEADBOLT EDITION 7S

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lockly Serrure de porte

Lockly

Lockly DEADBOLT EDITION 7S Manuel utilisateur

Lockly

Lockly Satin Nickel Secure Plus Smart Lock Deadbols Manuel utilisateur

Lockly

Lockly DEADBOLT EDITION PGD1128 Manuel utilisateur

Lockly

Lockly SECURE PLUS Manuel utilisateur

Lockly

Lockly Vision Manuel utilisateur

Lockly

Lockly LATCH EDITION SECURE PGD628 Manuel utilisateur

Lockly

Lockly Secure LUX Manuel utilisateur

Lockly

Lockly LATCH EDITION SECURE PLUS Manuel utilisateur

Lockly

Lockly DEADBOLT SECURE PLUS Manuel utilisateur

Lockly

Lockly ACCESS TOUCH PRO Manuel utilisateur

Lockly

Lockly DEADBOLT EDITION 7S Manuel utilisateur

Lockly

Lockly LUX COMPACT PGD688F-MB Mode d’emploi

Lockly

Lockly FLEX TOUCH PRO Manuel utilisateur

Lockly

Lockly DEADBOLT EDITION SECURE PGD728 Manuel utilisateur

Lockly

Lockly DEADBOLT EDITION 7S Manuel utilisateur

Lockly

Lockly FLEX TOUCH Manuel utilisateur

Lockly

Lockly ACCESS TOUCH PRO Manuel utilisateur

Lockly

Lockly FLEX TOUCH Manuel utilisateur

Lockly

Lockly VISION ELITE Mode d’emploi

Lockly

Lockly SECURE LUX MORTISE EDITION Manuel utilisateur

Lockly

Lockly LATCH EDITION SECURE PGD628 Manuel utilisateur

Lockly

Lockly PRO Manuel utilisateur

Lockly

Lockly SECURE PRO Manuel utilisateur

Lockly

Lockly DEADBOLT EDITION PGD1128FPW Manuel utilisateur

Manuels Serrure de porte populaires d'autres marques

Assa Abloy

Assa Abloy effeff 827A-IP Manuel utilisateur

We.lock

We.lock SECBNEBL51 Manuel utilisateur

Iseo

Iseo MA1A Manuel utilisateur

ID Lock

ID Lock 150 Manuel utilisateur

iLoq

iLoq G50S Manuel utilisateur

SDC

SDC Z7835 Manuel utilisateur

ilco

ilco 452 Manuel utilisateur

Samsung

Samsung shs-h705 Manuel utilisateur

TRU-BOLT

TRU-BOLT 08102017 Manuel utilisateur

CDVI

CDVI 500-LADJ Manuel utilisateur

Igloohome

Igloohome Deadbolt 2S Metal Grey Instructions d'installation et d'entretien

eSSL

eSSL FL-300 Manuel utilisateur

JAKO

JAKO JKBTNX4 Manuel utilisateur

Dorma

Dorma MUNDUS PREMIUM GK 50 Guide de l'utilisateur

SCOOP

SCOOP Pullbloc 4.1 FS Panik Manuel utilisateur

Yale

Yale MORTISE 8800 SERIES Manuel utilisateur

Siegenia

Siegenia KFV AS3500 Manuel utilisateur

Saflok

Saflok Quantum ädesē RFID Manuel utilisateur