LIVARNO LUX 15229S1LD Caractéristiques techniques

LED FLOOR LAMP

LED-STEHLEUCHTE

Montage-, Bedienungs- und Sicherheitshinweise

LED FLOOR LAMP

Assembly, operating and safety instructions

IAN 320443_1901

GB/IE/NI Assembly, operating and safety instructions Page 5

DE/AT/CH Montage-, Bedienungs- und Sicherheitshinweise Seite 11

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the

device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

910

15229S1LD

5GB/IE/NI

List of pictograms used........................................................................................................Page 6

Introduction...................................................................................................................................Page 6

Intended use........................................................................................................................................Page 6

Scope of delivery................................................................................................................................Page 6

Parts description..................................................................................................................................Page 7

Technical data.....................................................................................................................................Page 7

Safety.................................................................................................................................................Page 7

Safety notes.........................................................................................................................................Page 7

Initial use.........................................................................................................................................Page 8

Assembling the lamp...........................................................................................................................Page 8

Switching the lamp on/off.................................................................................................................Page 8

Changing light bulbs...........................................................................................................................Page 8

Maintenance and cleaning...............................................................................................Page 9

Disposal............................................................................................................................................Page 9

Warranty and service...........................................................................................................Page 9

Warranty .............................................................................................................................................Page 9

Service address...................................................................................................................................Page 9

Declaration of conformity...................................................................................................................Page 9

Manufacturer.......................................................................................................................................Page 10

6 GB/IE/NI

List of pictograms used

Read the instructions! The packaging is made from 100%

recycled paper.

This lamp is only suitable for indoor

use in dry and enclosed spaces.

Danger to life and risk of accidents

for infants and children!

Volts (alternating voltage) Warning - risk of electric shock!

Danger to life!

Hertz (frequency) For your safety

Watts (eﬀective power) Caution! Risk of burns due to hot

surfaces!

Protection class II Not dimmable!

Observe the warnings and safety

notes! b

Dispose of the packaging and

device in an environmentally

friendly manner!

LED Floor Lamp

Introduction

Congratulations on the purchase of your

new device. You have chosen a high-quality

product. The instructions for use are a

part of this product. They contain important infor-

mation about safety, use and disposal. Before using

the product, please familiarise yourself with all the

instructions for use and safety notes. The product

must only be used as described and for the speci-

ﬁed applications. When passing this product on to

others, please be sure to include all documentation.

Before using this product for the ﬁrst time, verify that

the correct voltage is available and that all parts

are properly assembled.

Intended use

This lamp is only suitable for indoor use

in dry and enclosed spaces. This device

is intended for private household use only.

Scope of delivery

Check that all the parts are present and that the

device is in perfect condition immediately after

unpacking.

1 LED Floor Lamp

1 Lampshade

1 Threaded ring

1 Light bulb (1 x E27

7W LED, approx.

806lm, 2700K)

1 Set of assembly

instructions and

instructions for use

7GB/IE/NI

Parts description

1Light bulb

2Threaded ring

3Lampshade

4Lamp socket

5Tripod socket

6Upper support tube

7Middle support tube

8Lower support tube

9Mains plug

10 ON/OFF foot

switch

Technical data

Item no.:

15229S1LD

Operating voltage: 220-240V~, 50/60Hz

Lamp socket: E27

Protection class: II/

Light bulb

(max. wattage): 1 x E27 max. 60 W or

max. 9W LED

Dimensions: height: approx. 156cm,

Shade diameter:

approx. 45cm,

Tripod diameter:

approx. 62cm,

Cord length: 1.8m

Safety

Safety notes

Damage due to failure to comply with these instruc-

tions for use will void the warranty! We assume no

liability for consequential damages! We assume no

liability for property damage or personal injury

caused by improper handling or failure to observe

the safety notes!

DANGER TO

LIFE AND RISK OF ACCIDENT

FOR INFANTS AND CHILDREN!

Never leave children unsupervised with the pack-

aging material. The packaging material poses

a suﬀocation hazard. Children frequently un-

derestimate the dangers.

This device may be used by children aged

8 years and up, as well as by persons with re-

duced physical, sensory or mental capacities,

or lacking experience and/or knowledge, so

long as they are supervised or instructed in the

safe use of the device and understand the as-

sociated risks. Do not allow children to play with

the product. Cleaning and user maintenance

must not be performed by children without

supervision.

Never leave the lamp unattended whilst it is

switched on.

RISK OF INJURY! Do not leave the lamp or

packaging material lying unattended. Plastic

ﬁlm / bags, plastic parts, etc. are dangerous

for children to play with.

Avoid the risk of fatal injury

from electric shock

Always check the mains plug for damage be-

fore connecting the lamp to the mains. Never

use the lamp if it shows any signs of damage.

In the event of damage, repairs or other prob-

lems with the lamp, please contact the service

centre or an electrician.

Never allow the lamp to come into contact with

water or other liquids.

Never open any of the electrical equipment

(e.g. switches, ﬁtting socket etc.) or insert any

objects into this equipment. Such interferences

pose a risk of fatal injury from electric shock.

Only touch the insulated part of the mains plug

when connecting or disconnecting it from the

mains supply!

Never use the mains cable as a handle.

To prevent hazards, if the external ﬂexible lead

on this lamp is damaged it must be replaced

by the manufacturer, its service representative

or an equally qualiﬁed professional.

Before use, verify that the available mains

voltage corresponds to the required operating

voltage of the lamp (see “Technical data“).

Always unplug the lamp from the mains prior

to assembly, disassembly, cleaning, or if the

lamp will not be used for extended periods.

8 GB/IE/NI

Keep the lamp and the mains cable away from

open ﬁre and hot surfaces.

Ensure the mains cable does not pose a tripping

hazard.

Do not kink the mains cable or run it over sharp

edges.

The LED ﬁlament light bulb is not

dimmable.

For your safety

Position the lamp so it is protected from mois-

ture and dirt.

Never place the lamp where it can fall into a

bath or washbasin.

Never reach for an electrical appliance which

has fallen into water! In this event, immediately

unplug the mains plug from the power socket.

Always be alert! Always pay attention to what

you are doing and use common sense.

Do not cover the lamp with objects. Excessive

heat build-up can result in ﬁre.

Do not look into the light bulb from a close

distance during operation.

Do not use optical instruments to look at the

light source.

In order to disconnect the lamp completely

from the power supply, the mains plug must be

removed from the socket.

Initial use

Assembling the lamp

(see illustration)

Attention: The threaded ring 2is pre-installed

on the lamp socket 4; please remove.

Screw the ﬁrst three upper support tubes 6

into the tripod socket 5.

Screw the next three middle support tubes 7

into the upper support tubes 6.

Pull the cable out of the one bottom support

tube 8and screw into the middle support

tube 7.

Screw the remaining two lower support tubes

8into the middle support tubes 7.

Adjust the lampshade 3to the correct posi-

tion.

Secure the lampshade 3with the ring nut 2.

Be sure all are positioned correctly.

Screw the light bulb 1clockwise into the

lamp socket 4on the tripod socket 5. Use a

clean, ﬂuﬀ-free cloth when inserting the light

bulb 1.

Plug the mains plug 9into a properly in-

stalled power socket.

Your lamp is now ready to use.

Switching the lamp on / oﬀ

Press the ON/ OFF foot switch 10 to switch

the lamp on and oﬀ.

Changing light bulbs

DANGER OF ELECTRIC

SHOCK! First unplug the mains plug 9from the

power socket.

CAUTION! RISK OF BURNS DUE TO

HOT SURFACES! Allow the lamp to cool down

completely.

Use a clean, ﬂuﬀ-free, dry cloth when replacing

the light bulb 1.

Unscrew the defective light bulb 1out of the

lamp socket 4on the tripod socket 5, turn-

ing anti-clockwise.

Screw a new light bulb 1(see “Technical

data“) clockwise into the lamp socket 4on

the tripod socket 5.

Plug the mains plug 9into a properly installed

power socket.

Your lamp is now ready to use.

9GB/IE/NI

Maintenance and cleaning

DANGER OF ELECTRIC

SHOCK! For electrical safety, never clean the lamp

with water or other liquids, nor immerse it in water.

DANGER OF ELECTRIC

SHOCK! First unplug the mains plug 9from the

power socket.

CAUTION! RISK OF BURNS DUE TO

HOT SURFACES! Allow the lamp to cool down

completely.

Do not use solvents, petrol, etc. These would

damage the lamp.

Only clean with a dry, ﬂuﬀ-free cloth.

Plug the mains plug 9into a properly installed

power socket.

Disposal

The packaging is made entirely of recyclable mate-

rials, which you may dispose of at local recycling

facilities.

Observe the marking of the packaging

materials for waste separation, which

are marked with abbreviations (a) and

numbers (b) with following meaning:

1–7: plastics/ 20–22: paper and ﬁbre-

board/ 80–98: composite materials.

The product and packaging materials

are recyclable, dispose of it separately

for better waste treatment. The Triman

logo is valid in France only.

Contact your local refuse disposal

authority for more details of how to

dispose of your worn-out product.

To help protect the environment, please

dispose of the product properly when it

has reached the end of its useful life and

not in the household waste. Information

on collection points and their opening

hours can be obtained from your local

authority.

Warranty and service

Warranty

This product includes a 3 year warranty from the

date of purchase. This device has been manufactured

with care under strict quality control. During the

warranty period we will remedy any defects in ma-

terial or manufacture free of charge. In the event of

a defect during the warranty period, please send

the device to the listed service centre, referencing

the following item number: 15229S1LD.

Damages due to improper handling are excluded

from the warranty. Failure to comply with the in-

structions of use or interference by non-authorised

persons as well as wear parts (e.g. light bulbs) are

excluded from warranty. Services performed under

the warranty do not extend or renew the warranty

period.

Service address

GLOBO Handels GmbH

Gewerbestrasse 3

9184 Sankt Peter

AUSTRIA

Tel.: +43 (0) 4253/32050

Fax: +43 (0) 4253/32050 - 20

E-Mail: oﬃ[email protected]

www.globo-lighting.com

IAN 320443_1901

Please have your receipt and item number (e.g.

IAN 123456_7890) ready as your proof of pur-

chase when enquiring about your product.

Declaration of conformity

This product fulﬁls the requirements of the applicable

European and national directives. Conformity has

been veriﬁed. The relevant declarations and docu-

ments are held by the manufacturer.

10 GB/IE/NI

Manufacturer

GLOBO Handels GmbH

Gewerbestrasse 3

9184 Sankt Peter

AUSTRIA

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels LIVARNO LUX Lampe de travail

LIVARNO LUX

LIVARNO LUX 274111 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 103745-14-01-BS Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 39584 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 292093 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 14121106L Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 271449 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX LED FLOOR LAMP Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 279345 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 94430 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 292060 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX ST-LED-00740 Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX Z31685B Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 275248 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 14117008L Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 55466 Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX Z30497B Manuel utilisateur

LIVARNO LUX

LIVARNO LUX VEILLEUSE LED Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 14140100L Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX 300635 Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX LLFL 27 A1 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 292043 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX 285386 Manuel utilisateur

LIVARNO LUX

LIVARNO LUX LED ROPE LIGHT Caractéristiques techniques

LIVARNO LUX

LIVARNO LUX LLFL 27 A1 Manuel utilisateur

Manuels Lampe de travail populaires d'autres marques

ANSMANN

ANSMANN POWERLIGHT 5.1 Manuel utilisateur

RTRMAX

RTRMAX RTX1868 Manuel utilisateur

FeinTech

FeinTech LAL00220 Manuel utilisateur

Bunker Hill Security

Bunker Hill Security 64735 Manuel utilisateur

Goobay

Goobay 30450 Manuel utilisateur

REV Ritter

REV Ritter SPOT Manuel utilisateur

Ignition

Ignition Stagepix Line 100 IP Manuel utilisateur

SCANGRIP

SCANGRIP DUO CONNECT Manuel utilisateur

Bosch

Bosch GLI 18 V Manuel utilisateur

Bayco

Bayco SL-1514 Manuel utilisateur

EUFAB

EUFAB SMD LED 8+1 Manuel utilisateur

DeWalt

DeWalt DCL510 Manuel utilisateur

PowerSmith

PowerSmith PWLD080T Manuel utilisateur

MaxLite

MaxLite 73683 Manuel utilisateur

Heitronic

Heitronic Trend 27867 Manuel utilisateur

Monzana

Monzana Gore MZCL10 Manuel utilisateur

EINHELL

EINHELL TE-CL 18/2000 LiAC Manuel utilisateur

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur