Linak TECHLINE LA36 Manuel d'instructions
Actuator LA36/LA37
Endstop signals and relative positioning - Dual hall
Connection diagram
LINAK.COM/TECHLINE
FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS
Copyright © LINAK 2020.11 . MA-M9-02-537-C .LINAK A/S reserves the right to make technical alterations
Connection diagram
7
2020 © LINAK A/S
Endstop signals and relative positioning - Dual hall
Diagram of Dual hall:
36XXXXXXXH00XX-XXXXXXXXXXXXXXXX
36XXXX+2HXXXXXX
37XXXX+2HXXXXXX
*VIOLET/WHITE: Endstop signals out are NOT potential free
Tip: If you wish to use the endstop signals, you will have to keep power on the brown, blue,
red and black wires, otherwise the signal will be lost.
Compliant with:
Powered by Danfoss
BROWN
BLUE
VIOLET*
WHITE*
RED
YELLOW
BLACK
+
-
GREEN
2
5
6
1
2
5
6
1
4
3
4
3
AMP DEUTSCH
6P6P
1-3
4-6
1
6
2
5
3
4
6P
FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS
Copyright © LINAK 2020.11 . MA-M9-02-537-C .LINAK A/S reserves the right to make technical alterations
I/O Specifications
7
2020 © LINAK A/S
Endstop signals and relative positioning - Dual hall
Input/Output Specification Comments
Description The actuator can be equipped with Dual Hall that gives a relative positioning feedback
signal when the actuator moves.
Brown 12, 24, 36* or 48* VDC (+/-)
*Only available on LA36
12 V ± 20 %
24 V ± 10 %
36 V ± 10 %
48 V ± 10 %
Under normal conditions:
12 V, max. 26 A depending on load
24 V, max. 13 A depending on load
36 V, max. 10 A depending on load
48 V, max. 8.0 A depending on load
To extend actuator:
Connect Brown to positive
To retract actuator:
Connect Brown to negative
Blue To extend actuator:
Connect Blue to negative
To retract actuator:
Connect Blue to positive
Red Signal power supply (+) 12 - 36 VDC Current consumption:
Max. 40 mA, also when the
actuator is not running
Black Signal power supply GND (-)
Green Hall B Hall output (PNP)
Movement per each Hall pulse
The Hall sensor signals are generated by the
turning of the actuator gearing.
These signals can be fed into a PLC (Programmable
Logic Controller). In the PLC the quadrature signals
can be used to register the direction and
position of the piston rod.
Output voltage min. VIN - 2 V
Current output 12 mA
Overvoltage on the motor can result in shorter
pulses.
N.B. For more precise measurements, please
contact LINAK A/S.
Actuator G:ear Pitch: mm/count
Yellow Hall A LA36 H8 mm 0,442
LA36 H12 mm 0,662
LA36 H16 mm 0,883
LA36 G16 mm 1,016
LA36 F16 mm 2,309
LA36 F20 mm 2,890
LA37 C2,5 mm 0,138
LA37 C8 mm 0,442
Violet Endstop signal in Output voltage min. VIN - 2 V
Source current max. 30 mA
NOT potential free
White Endstop signal out
FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS
Copyright © LINAK 2020.11 . MA-M9-02-537-C .LINAK A/S reserves the right to make technical alterations
Terms of use
The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing
accurate and up-to-date information on its products.
However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and
changes without prior notice.Therefore, LINAK cannot guarantee the correct and actual status of said information on its products.
While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability
of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed
in its catalogues or other written material drawn up by LINAK.
All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.
Autres manuels pour TECHLINE LA36
1
Ce manuel convient aux modèles suivants
1
Autres manuels Linak Contrôleurs
Linak
Linak TD4 Manuel utilisateur
Linak
Linak TECHLINE LA33 Manuel utilisateur
Linak
Linak TR-EM-273 Manuel utilisateur
Linak
Linak TR-EM-288 Manuel utilisateur
Linak
Linak TD4 Manuel utilisateur
Linak
Linak TECHLINE LA37 Manuel utilisateur
Linak
Linak ACTUATOR LA36 Manuel utilisateur
Linak
Linak LA20 Manuel utilisateur
Linak
Linak DESKLINE DB5 Manuel utilisateur
Linak
Linak Homeline LA10 Manuel utilisateur
Linak
Linak Deskline DL7 system Manuel utilisateur
Linak
Linak Homeline LA18 Manuel utilisateur
Linak
Linak LA43IC Manuel utilisateur
Linak
Linak Homeline TWINDRIVE TD5 Standard Manuel utilisateur
Linak
Linak LA12 Manuel utilisateur
Linak
Linak BusLink LA14 Manuel utilisateur
Linak
Linak 273 Series Manuel utilisateur
Linak
Linak LA20 Manuel utilisateur
Linak
Linak TWINDRIVE HB12 Manuel utilisateur
Linak
Linak TWINDRIVE TD1 280 Manuel utilisateur
