Linak TECHLINE LA25 Manuel d'instructions

Actuator LA25

Endstop signals and absolute positioning - Analogue feedback

Connection diagram

LINAK.COM/TECHLINE

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

Connection diagram

2019 © LINAK A/S

Endstop signals and absolute positioning - Analogue feedback

25XXXXXXXX0A0X0X=XXXXX1XXXXXXX

*YELLOW/GREEN: Endstop signals out are NOT potential free

Tip: If you wish to use the endstop signals, you will have to keep power on the red and black wires, otherwise the signal

will be lost.

Standard connector front view

DEUTSCH

BROWN

BLUE

YELLOW*

GREEN*

RED

VIOLET

BLACK

Compliant with:

Danfoss

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

I/O Speciﬁcations

2019 © LINAK A/S

Endstop signals and absolute positioning - Analogue feedback

Input/Output Specification Comments

Description The actuator can be equipped with electronic circuit that gives an

analogue feedback signal, which indicates the position of actuator.

Brown 12-24 VDC (+/-)

12 V ± 20%

24 V ± 10%

Under normal conditions:

12V , 5 A at max load

24 V, 2.5 A at max load

To extend actuator:

Connect Brown to positive

To retract actuator:

Connect Brown to negative

Blue To extend actuator:

Connect Blue to negative

To retract actuator:

Connect Blue to positive

Red Signal power supply (+) 12-24 VDC Current consumption:

Max. 60 mA, also when the

actuator is not running

Black Signal power supply GND (-)

Green Endstop signal out Output voltage min. VIN - 2 V

Source current max. 100 mA

NOT potential free

Yellow Endstop signal in

Violet Analogue feedback

0-10 V (Feedback level 1)

0.5-4.5 V (Feedback level 2)

Tolerances +/- 0.2 V

Max. current output: 1 mA

Ripple max. 200 mV

Transaction delay max. 20 ms

Linear feedback 0.5%

Source current max. 1 mA

4-20 mA (Feedback level 3)

Special (Feedback level 9)

Tolerances +/- 0.2 mA

Transaction delay 20 ms

Linear feedback 0.5%

Output: Source

Serial resistance:

12V max 300 ohm

24V max. 900 ohm

White Not to be connected

For actuators with analogue feedback it is recommended to fully extract and retract the actuator on a regular basis (thereby activat-

ing the limit switches) in order to ensure precise positioning.

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

The user is responsible for determining the suitability of LINAK products for speciﬁc application. LINAK takes great care in providing

accurate and up-to-date information on its products.

However, due to continuous development in order to improve its products, LINAK products are subject to frequent modiﬁcations and

changes without prior notice.Therefore, LINAK cannot guarantee the correct and actual status of said information on its products.

While LINAK uses its best efforts to fulﬁl orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability

of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed

in its catalogues or other written material drawn up by LINAK.

All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.

Autres manuels Linak Contrôleurs

Linak

Linak TECHLINE LA37 Manuel utilisateur

Linak

Linak TWINDRIVE TD1 Manuel d'exploitation

Linak

Linak TECHLINE LA25 Manuel d'instructions

Linak

Linak BusLink LA25 Manuel utilisateur

Linak

Linak TR-EM-288-SPF Manuel utilisateur

Linak

Linak TWINDRIVE TD32 Manuel utilisateur

Linak

Linak Homeline TWINDRIVE TD5 Standard Manuel utilisateur

Linak

Linak ACTUATOR LA36 Manuel d'instructions

Linak

Linak MEDLINE LA32 Manuel d'exploitation

Linak

Linak DL12 Manuel utilisateur

Linak

Linak TECHLINE LA36 Manuel d'instructions

Linak

Linak TECHLINE LA35 Manuel utilisateur

Linak

Linak LA18 IC Advanced Manuel utilisateur

Linak

Linak TECHLINE IO-Link LA25 Manuel utilisateur

Linak

Linak Homeline LA18 Manuel utilisateur

Linak

Linak TECHLINE LA25 Manuel d'instructions

Linak

Linak ACTUATOR LA36 Manuel utilisateur

Linak

Linak Homeline KA20IC Manuel utilisateur

Linak

Linak Homeline LA10 Manuel utilisateur

Linak

Linak HOMELINE KA20IC2 Manuel utilisateur

Linak

Linak TR-EM-288 Manuel utilisateur

Linak

Linak LA12 Manuel utilisateur

Linak

Linak LA20 Manuel utilisateur

Linak

Linak TWINDRIVE TD1 280 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur