Linak TECHLINE LA36 Manuel d'instructions

Actuator LA36/LA37

Endstop signals and relative positioning - Single hall

Connection diagram

LINAK.COM/TECHLINE

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

Connection diagram

2020 © LINAK A/S

Endstop signals and relative positioning - Single hall

36XXXX+2KXXXXXX

37XXXX+2KXXXXXX

*YELLOW/GREEN: Endstop signals out are NOT potential free (see specifications on next page)

Tip: If you wish to use the endstop signals, you will have to keep power on the brown, blue,

red and black wires, otherwise the signal will be lost.

Compliant with:

BROWN

BLUE

YELLOW*

GREEN*

RED

VIOLET

BLACK

AMP DEUTSCH

6P6P

1-3

4-6

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

I/O Speciﬁcations

2020 © LINAK A/S

Endstop signals and relative positioning - Single hall

Input/Output Specification Comments

Description The actuator can be equipped with Single hall that gives a relative positioning feedback

signal when the actuator moves.

Brown 12, 24, 36* or 48* VDC (+/-)

*Only available on LA36

12 V ± 20 %

24 V ± 10 %

36 V ± 10 %

48 V ± 10 %

Under normal conditions:

12 V, max. 26 A depending on load

24 V, max. 13 A depending on load

36 V, max. 10 A depending on load

48 V, max. 8.0 A depending on load

To extend actuator:

Connect Brown to positive

To retract actuator:

Connect Brown to negative

Blue To extend actuator:

Connect Blue to negative

To retract actuator:

Connect Blue to positive

Red Signal power supply (+) 12 - 36 VDC Current consumption:

Max. 40 mA, also when the

actuator is not running

Black Signal power supply GND (-)

Green Endstop signal out Output voltage min. VIN - 2 V

Source current max. 100 mA

Yellow Endstop signal in

Violet Single Hall output (PNP)

Movement per hall pulse:

Output voltage min. VIN - 2 V

Max. current output: 12 mA

Max. 680 nF

N.B. For more precise measurements, please

contact LINAK A/S.

Low frequency with a high load.

Higher frequency with no load.

Actuator: Gear: Pitch: mm / count:

LA36 H8 mm 0,110

LA36 H12 mm 0,166

LA36 H16 mm 0,221

LA36 G16 mm 0,254

LA36 F16 mm 0,577

LA36 F20 mm 0,721

LA37 C2,5 mm 0,034

LA37 C8 mm 0,110

Input: Single hall output:

White Not to be connected

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

The user is responsible for determining the suitability of LINAK products for speciﬁc application. LINAK takes great care in providing

accurate and up-to-date information on its products.

However, due to continuous development in order to improve its products, LINAK products are subject to frequent modiﬁcations and

changes without prior notice.Therefore, LINAK cannot guarantee the correct and actual status of said information on its products.

While LINAK uses its best efforts to fulﬁl orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability

of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed

in its catalogues or other written material drawn up by LINAK.

All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.

Autres manuels pour TECHLINE LA36

Ce manuel convient aux modèles suivants

Autres manuels Linak Contrôleurs

Linak

Linak TECHLINE LA25 Manuel d'instructions

Linak

Linak LA12 Manuel utilisateur

Linak

Linak TECHLINE LA33 Manuel utilisateur

Linak

Linak DESKLINE DB5 Manuel utilisateur

Linak

Linak BusLink LA14 Manuel utilisateur

Linak

Linak DL12 Manuel utilisateur

Linak

Linak LA18 IC Advanced Manuel utilisateur

Linak

Linak TECHLINE LA36 Manuel d'instructions

Linak

Linak TECHLINE LA35 Manuel utilisateur

Linak

Linak TECHLINE LA25 Manuel d'instructions

Linak

Linak TWINDRIVE TD1 Manuel d'exploitation

Linak

Linak TWINDRIVE HB12 Manuel utilisateur

Linak

Linak TECHLINE LA35 Manuel utilisateur

Linak

Linak TD4 Manuel utilisateur

Linak

Linak ACTUATOR LA36 Manuel d'instructions

Linak

Linak DESKLINE DL1A Manuel utilisateur

Linak

Linak TR-EM-288-SPF Manuel utilisateur

Linak

Linak MEDLINE LA32 Manuel d'exploitation

Linak

Linak ACTUATOR LA36 Manuel d'instructions

Linak

Linak Techline Linear Actuator Technology Manuel utilisateur

Linak

Linak TECHLINE LA37 Manuel utilisateur

Linak

Linak LA36 Long Life Manuel utilisateur

Linak

Linak HB100 Manuel utilisateur

Linak

Linak ACTUATOR LA36 Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur