Lightspeed RedcatAccess Manuel utilisateur

Quick Start Guide

Instructional Audio System

Remove microphone

from charger. Press

the mute button to

unmute, hold near

your mouth and

begin speaking.

Remove microphone

from charger and press

the mute button to

begin speaking.

USING THE FLEXMIKE

PAIRING MICROPHONES TO REDCAT ACCESS

CHARGE MICROPHONES NIGHTLY

USING THE SHAREMIKE

ALIGN WITH

COLLARBONE

TALK (BLUE)

MUTE (WHITE)

TALK (BLUE)

MUTE (WHITE)

POWER/MUTE BUTTON

ADJUST

VOLUME

NORMAL OPERATION

CHARGING IN PROGRESS

CHARGING COMPLETE

POWER/MUTE

BUTTON

ADJUST

VOLUME

DETERMINE SET-UP LOCATION AND PLUG IN POWER SUPPLY

Redcat Access should be placed within 7 feet of an electrical outlet and on a

surface about 4-6 feet o the ground.

Next, find a location as far away as possible from the teacher who will be using

the microphone. Avoid putting Redcat in close proximity to the teacher’s mic

which can result in feedback.

Connect the AC power cord into the DC power supply. Insert the connector into

the Redcat and plug the power cord into an electrical outlet. Redcat Access

automatically powers on and the white POWER light on the front panel will glow.

POWER STATUS

LIGHT

Place the microphones

into the cradle charger. The

power status light will glow

red when it is charging.

When charging is complete,

the power status light will

glow green.

It takes about 5-6 hours

to fully charge the

microphone battery.

Your system is shipped with microphones and base units already paired.

If you ever need to pair new components, follow this pairing process.

AUDIO IN

DC OUTPUT

24V/1.75A

ON/OFF

MIN

MAX

AUDIO

(ALD) OUT

MIN

MAX

MIN

MAX

POWER ON

With a paperclip, push the register

button on the side of Redcat

Access.

From a powered o state, press and

hold the power button for 5 seconds

until the mic 1 and mic 2 lights start

flashing, then release the button and

let the pairing process finish.

The mic 1 or mic 2 lights on Redcat

Access will light green indicating

the pairing process is complete. The

corresponding mic 1 or mic 2 light on

the microphone will stay illuminated.

MIC 1 MIC 2

AUDIO IN

DC OUTPUT

24V/1.75A

ON/OFF

MIN

MAX

AUDIO

(ALD) OUT

MIN

MAX

MIN

MAX

1 2 3

MIC 2

MIC 1

POWER BUTTON

For complete operating instructions, go to www.lightspeed-tek.com/RCAN-usermanual (or scan the 2D barcode). QS0618US01-1

Quick Start Guide

DETERMINE LOCATION CONNECT TO POWER POWER ON

Connect the USB cable power cord

to a computer, or use the USB power

adapter to plug into wall outlet.

Plug the USB cable into the USB input

on the back of the Media Connector.

Media Connector is designed to be

connected to the primary media

source in the classroom, usually the

computer or display panel.

When powered on, the white LED on the front

panel will glow.

Redcat does not need to be powered o at the

end of day, but if desired, you may power down

Redcat by powering down the Media Connector.

Audio

InputAudio

OutputTone

Level

Push

StatusPower

Media

Connector

Audio

InputAudio

OutputTone

Level

Push

StatusPower

Media

Connector

POWER LIGHT

USING FLEXMIKE AS A WIRELESS AUDIO LINK

CONNECTING TO AN ANALOG AUDIO SOURCE

Audio

InputAudio

OutputTone

Level

Push

StatusPower

Media

Connector

AUDIO INPUT SELECTORLEVEL

You can connect a 2nd microphone to your computer’s USB port to

enable a wireless 2-way audio link.

SEND AUDIO FROM THE COMPUTER to the Redcat to ensure all

audio from the computer (videos, video conferencing, audiobooks,

music, etc) can be played through Redcat Access.

SEND AUDIO TO THE COMPUTER from the Redcat Access to ensure

the teacher’s Flexmike and any student microphones are clearly

picked up by a video conferencing solution.

Plug your external audio equipment (computer, tablet, video display,

etc.) into one of the Audio input jacks using a 3.5mm audio cable.

Adjust the volume by pressing the Audio Input selector and adjusting

the level knob.

USB

5V / 0.2A

Audio Inputs

432

Audio Outputs

.MM CABLE

1 2 3

Redcat Access with optional Media Connector

Audio

Input Audio

Output Tone

Level

Push

StatusPower

Media

Connector

Audio

Input Audio

Output Tone

Level

Push

StatusPower

Media

Connector

Connect the microphone to

your computer using a USB-C

cable. Open your computer

sound settings to select

Lightspeed Audio as the

microphone and speaker.

USB cable sold separately. Lightspeed oers

a USB-A to USB-C cable for sale (part #USBC)

Media Connector

Autres manuels Lightspeed Système stéréo

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed flexcat Manuel utilisateur

Lightspeed

Lightspeed 850iR Manuel utilisateur

Lightspeed

Lightspeed CAT AV Manuel utilisateur

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed 705iR Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed Redcat Access LSRCA 1881 Manuel utilisateur

Lightspeed

Lightspeed CAT 860 Manuel utilisateur

Lightspeed

Lightspeed Mobile PA Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed flexcat Manuel utilisateur

Lightspeed

Lightspeed 955 Access Manuel utilisateur

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed Cascadia C25 Manuel utilisateur

Lightspeed

Lightspeed Mobile PA Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed ActivateStation Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Manuels Système stéréo populaires d'autres marques

LG CM3330B Manuel utilisateur

Sony

Sony SS-CEP50 Manuel utilisateur

Cetacea Sound

Cetacea Sound CVS-II Manuel utilisateur

Aiwa

Aiwa XR-H66MD Manuel utilisateur

Denon

Denon UCD-250 Manuel utilisateur

Sanyo

Sanyo DC-MX41i Manuel utilisateur

Sharp

Sharp CD-ES600V Manuel utilisateur

Exibel

Exibel BDX600-UK Manuel utilisateur

Sanyo

Sanyo DC-F320 Manuel utilisateur

Philips

Philips FWM583X Manuel utilisateur

Sharp

Sharp CD-C462 Manuel utilisateur

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuel utilisateur

Aiwa

Aiwa XR-EM70 Manuel utilisateur

Cyrus

Cyrus Lyric Manuel utilisateur

Philips

Philips MCM159/98 Manuel utilisateur

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuel utilisateur

RCA

RCA RS3965SB Manuel utilisateur

Sharp

Sharp XL-UH240 Manuel utilisateur