Lightspeed Cat 855 Manuel utilisateur

Classroom Audio Systems

Cat 800 Series

Installation Manual

Cat 855

Cat 885

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use the apparatus

near water.

6. Clean only with dry cloth.

7. Do not block any ventilation

openings. Install in

accordance with the

manufacturer’s instructions.

8. Do not install near any heat

sources such as radiators,

heat registers, stoves, or

other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety

purpose of the polarized

or grounding-type plug.

A polarized plug has two

blades with one wider than

the other. A grounding- type

plug has two blades and a

third grounding prong. The

wide blade or the third prong

is provided for your safety. If

the provided plug does not

fit into your outlet, consult an

electrician for replacement of

the obsolete outlet.

10. Protect the power cord

from being walked on or

pinched particularly at plugs,

convenience receptacles,

and the point where they exit

from the apparatus.

11. Only use attachments/

accessories specified by the

manufacturer.

12. Use only with a cart, stand,

tripod, bracket or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the

cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during

lightning storms or when

unused for long periods of

time.

14. Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus

has been damaged in any way,

such as power-supply cord or

plug is damaged, liquid has

been spilled or objects have

fallen into the apparatus, the

apparatus has been exposed

to rain or moisture, does not

operate normally, or has been

dropped.

15. When the mains plug or

appliance coupler is used as

the disconnect device, it shall

remain readily operable.

16. Please keep the unit in a good

ventilation environment.

17. WARNING: To reduce the risk

of ﬁre or electric shock, do not

expose this apparatus to rain or

moisture.

18. Apparatus shall not be exposed

to dripping or splashing and no

objects ﬁlled with liquids, such

as vases, shall be placed on the

apparatus.

19. Warning - battery pack shall

not be exposed to excessive

heat such as sunshine, fire or

the like.

TABLE OF CONTENTS

SECTION 1: 2 Important Safety Instructions

Overview 4 System Components and Unpacking

SECTION 2: 8 1. Location of the Ampliﬁer

Installation Planning 9 2. Installation of Ampliﬁer Wall Bracket 800WB

11 3. Installation of Ampliﬁer Wall Bracket 855WB

SECTION 3: 12 ISR Sensor/Receiver Location & Installation

ISR Sensor/Receiver 13 1. ISR Sensor/Receiver Installation

15 2. ISR Connection to Ampliﬁer

16 3. Connecting the Power Supply

SECTION 4: 17 TCQ Multimedia Ceiling Speaker Installation Instructions

Speaker Location & 23 Optional Conduit Connection for TCQ

Installation 24 DRQ Ceiling Speaker Installation Instructions

27 WMQ Wall Speaker Installation Instructions

30 4JS Ceiling Speaker Installation Instructions (Plenum Rated)

35 Connecting Wire to Ampliﬁer

SECTION 5: 36 1. Charging the Redmike and Redmike VC

Set Up & Integration 38 2. Operating the Redmike

39 3. Charging the Redmike Share

40 4. Operating the Redmike Share

41 5. Audio Integration

SECTION 6: 42 1. Pageﬁrst Installation for 855/885

Optional Equipment 44 2. Optional iRMC setup

46 3. Multiple Sensor Installation for Large Room Applications

SECTION 7: 48 Common Problems and Solutions

Troubleshooting

5. Set Up &

Integration

6. Installing Optional

Equipment 7. Troubleshooting

1. Overview 3. iR Sensor Location

& Installation

2. Installation

Planning

4. Speaker Location

& Installation

SYSTEM COMPONENTS AND UNPACKING

SECTION 1:

OVERVIEW

Ampliﬁer

Power Supply

The standard conﬁguration of the Cat 800 system will contain:

ISR Infrared Sensor/

Receiver and Cable

Cat 885 Ampliﬁer

Cat 855 Ampliﬁer

5. Set Up &

Integration

6. Installing Optional

Equipment 7. Troubleshooting

1. Overview 3. iR Sensor Location

& Installation

2. Installation

Planning

4. Speaker Location

& Installation

SYSTEM COMPONENTS AND UNPACKING CONT’D

Cradle Charger and

Power Supply

Redmike®

Classroom

Microphone

Wall Bracket for Cat

855 Ampliﬁer Only

5. Set Up &

Integration

6. Installing Optional

Equipment 7. Troubleshooting

1. Overview 3. iR Sensor Location

& Installation

2. Installation

Planning

4. Speaker Location

& Installation

SYSTEM COMPONENTS AND UNPACKING CONT’D

Speakers

Systems can be conﬁgured with a variety of different speaker types, including the following:

DRQ (x 4)

WMQ (x 4)

4jCS (x4)

(plenum rated)

TCQ (x 1)

5. Set Up &

Integration

6. Installing Optional

Equipment 7. Troubleshooting

1. Overview 3. iR Sensor Location

& Installation

2. Installation

Planning

4. Speaker Location

& Installation

Standard Components for 855 or 885

855 (or) Audio ampliﬁer/mixer

885 Audio ampliﬁer/mixer

24V-2.5-NA 24V/2.5A power supply for 855/885 in U.S. and Canada

24V-2.5-_ 24V/2.5A power supplyfor 855/885, specify country

ISR Infrared sensor/receiver with mounting bracket

CA-P5E50 50’ plenum-rated Cat5e cable

RMT2 Redmike classroom microphone with battery & lavaliere cord

NH2A27 AA NiMH rechargeable sensing battery for Redmike

RMCC Redmike cradle charger

5V-1.0-NA 5V/1.0A power supply for cradle charger in U.S. and Canada

5V-1.0-INT 5V/1.0A power supply for cradle charger outside U.S. and Canada

855WB Wall mount bracket for 855 only.

SPEAKERS As ordered.

SYSTEM COMPONENTS AND UNPACKING CONT’D

5. Set Up &

Integration

6. Installing Optional

Equipment 7. Troubleshooting

1. Overview 3. iR Sensor Location

& Installation

2. Installation

Planning

4. Speaker Location

& Installation

SECTION 2:

INSTALLATION PLANNING

First, ﬁnd a suitable location to set-up the ampliﬁer. It is best to put the ampliﬁer in a stable

location near the other equipment to be used. It can be set in a cabinet, on a tabletop, or

mounted on the wall with the optional wall shelf.

Media Cabinet Set-up

1. LOCATION OF THE AMPLIFIER

Avoid Separated Set-ups

Components should be

housed together. Wires

should be routed back directly

to the ampliﬁer.

The optional Lightspeed wall shelf (part

#800WB) is speciﬁcally designed to support

the Cat 885. The standard Lightspeed wall

shelf (part #855WB) is designed to support

the Cat 855.

Wall-mount Set-up

1. Overview 2. Installation

Planning

5. Set Up &

Integration

6. Installing Optional

Equipment 7. Troubleshooting

3. iR Sensor Location

& Installation

4. Speaker Location

& Installation

Optional 800WB for wall mounting

the Cat 885.

2. INSTALLATION OF AMPLIFIER WALL-MOUNT BRACKET

800WB

Speciﬁcations:

Dimensions (D x W x H): 11” x 20.7” x 5.5”

Weight: 5.15 lbs

Load Capacity: 25 lbs

Designed for: Cat 885

Installation Instructions:

Recommended tools: Screwdriver, hammer,

pencil, level

1. Determine the location of the shelf:

a. It should be located near a power

outlet.

b. Height should allow for easy access

to front control panel, typically 4-5

feet from the ﬂoor.

2. Attach the two brackets to the shelf using

the short screws provided.

3. Position shelf on the wall as it is shown in

the illustration above.

5. Set Up &

Integration

6. Installing Optional

Equipment 7. Troubleshooting

1. Overview 3. iR Sensor Location

& Installation

2. Installation

Planning

4. Speaker Location

& Installation

4. Use level to determine that the shelf is

straight.

5. The back of the shelf (the portion that is

ﬂush against the wall) has four mounting

holes. Using a pencil, mark the location

of the mounting holes onto the wall.

6. With the enclosed hardware, attach the

shelf to the wall:

a. Attaching to sheetrock or plaste

walls:

i. Gently screw the self-tapping

anchors into the wall at the 4

marked points. If the wall is very

hard material (ie. plaster), it may

be necessary

to drill a pilot hole.

ii. Holding the shelf up to the wall,

tighten the screws into the

anchors until the shelf is snug

against the wall.

b. Attaching to wood or into wall studs:

i. Drill a small pilot hole at the 4

marked points.

ii. Holding the shelf up to the wall,

drill the screws directly into the

wall until the shelf is snug.

7. Place the ampliﬁer on the shelf, inserting

the rubber feet on the bottom of the am-

pliﬁer through the corresponding holes

on the shelf.

8. There is room behind the ampliﬁer to

place the power supply and to thread the

AC cord through the hole in the back.

9. The microphones should be set on the

shelf to the side of the ampliﬁer where

they can be plugged in for charging. The

rolled edge of the shelf will prevent them

from sliding off.

2. INSTALLATION OF AMPLIFIER WALL-MOUNT BRACKET

800WB cont’d

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lightspeed Système stéréo

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed Topcat LSRCNG Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed RedcatAccess Manuel utilisateur

Lightspeed

Lightspeed CAT 860 Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed flexcat Manuel utilisateur

Lightspeed

Lightspeed 955Access Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed 975 Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed 800IX Manuel utilisateur

Lightspeed

Lightspeed 705iR Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed Cascadia C25 Manuel utilisateur

Lightspeed

Lightspeed Access Link Manuel utilisateur

Lightspeed

Lightspeed Activate System Manuel utilisateur

Lightspeed

Lightspeed ActivateStation Manuel utilisateur

Lightspeed

Lightspeed 800 Series Manuel utilisateur

Lightspeed

Lightspeed Active Manuel utilisateur

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed flexcat Manuel utilisateur

Manuels Système stéréo populaires d'autres marques

LG CM3330B Manuel utilisateur

Sony

Sony SS-CEP50 Manuel utilisateur

Cetacea Sound

Cetacea Sound CVS-II Manuel utilisateur

Aiwa

Aiwa XR-H66MD Manuel utilisateur

Denon

Denon UCD-250 Manuel utilisateur

Sanyo

Sanyo DC-MX41i Manuel utilisateur

Sharp

Sharp CD-ES600V Manuel utilisateur

Exibel

Exibel BDX600-UK Manuel utilisateur

Sanyo

Sanyo DC-F320 Manuel utilisateur

Philips

Philips FWM583X Manuel utilisateur

Sharp

Sharp CD-C462 Manuel utilisateur

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuel utilisateur

Aiwa

Aiwa XR-EM70 Manuel utilisateur

Cyrus

Cyrus Lyric Manuel utilisateur

Philips

Philips MCM159/98 Manuel utilisateur

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuel utilisateur

RCA

RCA RS3965SB Manuel utilisateur

Sharp

Sharp XL-UH240 Manuel utilisateur