Lightspeed ActivateStation Manuel utilisateur

U s e r M a n u a l

TABLEOFCONTENTS

SECTION

3Important safety instructions

Overview

Standard system components

Optionalcomponents

Flexcat pod controls and connections

Remote control functions and indicators

SECTION 2:

91. Determine set-up locations

InitialSet-up

2. Plug in the charging station

3. Charge Flexcat components

4. Power on all components

5.RegisternewFlexcat components

6. Ensure all components are ready

7. Optional: Pair with IOS device

8. Set up the Flexmike + earbud

9. Determine placement of the speaker pods

10.Settingsystemvolumelevels

SECTION 3:

17 Daily operation instructions

Daily Operation

1. Remove and place the pods

2. Remove the microphone and put it on

3. Remove the remote and begin instruction

Using the remote

4. Pod call button

5. Return all components to charging station

SECTION 4:

19 TipsandTricks

Additional

Operation

Information

Using optional pods #5-6

Operating+chargingpods#7-12

Additional capabilities available with LS Remote

app

SECTION 5:

23 Component registration overview

Maintenanceand

Troubleshooting

Battery replacement

Troubleshooting

SECTION 6:

29 Warranty statement

Warranty, Safety

and Specifications

Safetywarningsand certifications

System specifications

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use the apparatus near

water.

Clean only with dry cloth.

Do not block any ventilation

openings. Install in accordance

with the manufacturer’s

instructions.

Do not install near any heat

sources such as radiators, heat

registers, stoves, or other

apparatus (including amplifiers)

that produce heat.

Do not defeat the safety purpose

of the polarized or grounding-

type plug. A polarized plug

hastwo blades with onewider

than the other. A grounding-

type plug has two blades and

a thirdgrounding prong. The

wideblade or the third prong is

provided for your safety. If the

provided plug does not fit into

your outlet, consult an electrician

for replacement of the obsolete

outlet.

10.

Protect the power cord from

being walked on or pinched

particularly at plugs, convenience

receptacles, and thepoint where

they exit from the apparatus.

11.

Only use attachments/

accessories specified by the

manufacturer.

12.

Use only with a cart,

stand, tripod, bracket or

table specified by the

manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination

to avoid injury from tip-over.

13.

Unplug this apparatus during

lightning storms or when unused

for long periods of time.

14.

Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus

has been damaged in any way,

such as power-supply cord or

plug is damaged, liquid has been

spilled or objects have fallen into

the apparatus, the apparatus

has been exposed to rain or

moisture, does not operate

normally, or has been dropped.

15.

When the mains plug or

appliance coupler is used as the

disconnect device, it shall remain

readily operable.

16.

Please keep the unit in a good

ventilation environment.

17.

WARNING: Toreduce the risk

of fire or electric shock, do not

expose this apparatus to rain or

moisture.

18.

Apparatus shall not be exposed

to dripping or splashing and no

objects filled with liquids, such

as vases, shallbe placed onthe

apparatus.

19.

Warning - battery pack shall not

be exposed to excessive heat

such as sunshine, fire or the like.

SECTION1:

OVERVIEW

SYSTEMCOMPONENTSANDUNPACKING

The standardconfiguration of the Activate System will contain:

Smallgrouppods

Flexmike + earbud lanyard

Activate station with

power supply

ActivateMobileApp

PLEASE NOTE: Activate Station and Pods may be purchased as additions to an

Access ClassroomSystem for small groupinstruction. All Access components

are registered together at the factory and are labeled as such. Please keep all

components together as a system. Moving them from one system, or room, to

another will result in the need to re-register them in order to function.

Safety

Specifications

Maintenance

oubleshooting

Additional

Information

DaiIy

Operation

Initial

Set-up

Overview

StandardComponents(U.S.andCanada)

ACT

Activate Station with power supply

POD

Activate Pod with rechargeable battery pack

FM-EBL

Flexmike pendant microphone with earbud lanyard and

battery pack

NH2.5V

2.5V NiMH rechargeable battery pack for pods

NH2.4V 2.4V NiMH rechargeable battery pack for Flexmike

24V-1.75-NA

16V/2.0ApowersupplyforFCCS,U.S.andCanada

Standard Components(OutsideU.S.andCanada)

ACT-1881-_

Flexcat charging station with power supply, specify

country

POD-1881

Flexcat speaker pod with rechargeable battery pack

FM-EBL-1881

Flexmike pendant microphone with earbud lanyard and

battery pack

NH2.5V

2.5V NiMH rechargeable battery pack for pods

NH2.4V

2.4V NiMH rechargeable battery pack for Flexmike and

remote

24V-1.75-_

16V/2.0A power supply forFCCS,specifycountry

Safety

Specifications

Maintenance

oubleshooting

Additional

Information

DaiIy

Operation

Initial

Set-up

Overview

OPTIONALCOMPONENTS

Equipment which may be part of your system:

Additionalpods

Team teaching kit:

2nd Flexmike + earbud

lanyard

Optional remote control

OptionalAccessories

POD

Activate Pod with rechargeable battery pack (U.S.

andCanada)

POD-1881 Activate Pod with rechargeable battery pack (outside

ofU.S.andCanada)

FM-EBL Flexmikewith earbud lanyard (U.S.andCanada)

FM-EBL-1881

Flexmike with earbud lanyard (outside U.S. and

Canada)

FCHRC1

Handheld remote control with battery pack

MSC3535

3.5mm-3.5mm stereo audio cable

4 2

5 6

Mu te

Vol Vol

Safety

Specifications

Maintenance

oubleshooting

Additional

Information

DaiIy

Operation

Initial

Set-up

Overview

PODCONTROLSAND CONNECTIONS

CHARGING INDICATOR: this

light turns red when charging,

green to indicate charging

complete. During operation, this

light will turn green when the call

button is pressed.

POWER/LOW BATTERY

INDICATOR: this light blinks

blue when powered on, turns

solid blue when ready for

operation and turns red when

the battery is low.

POD NUMBER: the number will

light as a clear visual indicator

for the teacher to determine

which pod represents which

group number.

VOLUME: up/down buttons

adjust the volume of the pod

speaker.Thevolumelevel (-5

to 5) will be shown in the LED

window.

CALL BUTTON: studentscan

press this button to notify the

teachertheyneedassistance.

LOUDSPEAKER:

the internal

loudspeaker distributes the

teacher’svoice.

MICROPHONES: the internal

microphones that picks up the

student’s voice are located at

each end of the pod.

HEADPHONE OUT: connect

headphones for private listening.

The pod speaker is muted when

headphones are connected.

USB CHARGING/POWER

INPUT: to charge pods in

addition to those in the charging

station, plug the charging cable

from the Activate station or

other USBpower source into

thisjack.

10.

POWER: press to power on.

Press and hold for 3 seconds to

power off.

Safety

Specifications

Maintenance

oubleshooting

Additional

Information

DaiIy

Operation

Initial

Set-up

Overview

ACTIVATE STATION: CONTROLS,

CONNECTIONS AND INDICATORS

POWER/SLEEP:

press to

place the Activate Station

and classroom audiosystem

into sleep mode. The Activate

Station will continue to charge

devices when in sleep mode.

POWER INDICATOR: the light

will turn blue when powered

on, amber when placed in sleep

mode.

LINK INDICATOR: this light is

solid green to indicate Activate

is connected to the audio system

and ready for operation. It will

blink green for several seconds

when initially plugged into

power.

MICROPHONE VOLUME:

adjusts the volume level of

the classroom speaker for all

connected microphones. The

indicator lights to the right

change to show volume level.

AUDIO INPUT VOLUME:

adjusts the level of multimedia

devices plugged into the 3.5mm

audio input ports.

AUDIO OUTPUT VOLUME:

adjusts the level of ALD or

recording devices plugged into

the 3.5mm audio output ports.

VOLUME LEVEL INDICATORS:

shows the volume level of the

last source that was adjusted

(Microphone, Input, Output).

The source level will be updated

once a new volume button is

pressed.

FLEXMIKE CHARGING SLOTS

(2): placeyourFlexmike(s)in

these slots for nightly charging.

PODCHARGINGSLOTS (8):

place your pods in these slots for

nightly charging

10.

CHARGING COVERS:

covers

are included to protect unused

pod charging slots from dust

and debris

4 5 6

Safety

Specifications

Maintenance

oubleshooting

Additional

Information

DaiIy

Operation

Initial

Set-up

Overview

ACTIVATE STATION: CONTROLS,

CONNECTIONS AND INDICATORS

11.

AUDIO INPUTS (1-4): connect

a multimedia audio source to

wirelessly send the audio to

be played through the whole

classroom speaker(s).

12.

AUDIO OUTPUT(ALD):

connect Assistive Listening

Device to send the whole

classroom audio to an individual

student’s device.

13.

AUDIO OUTPUT (REC): connect

recording device to send the

teacher’s selected audio source

- wholeclassroom speaker or

individual pod - to a recording

device or installed camera.

14.

BLUETOOTHPAIRING(1-2):

pressthis button to pair Activate

to a mobile device. Download

the Lightspeed Activate app

from the iOS App Store or

Google Play for complete

instructions.

15.

ACCESS REGISTRATION:

this button is used to pair

the Activate Station with the

classroom audiosystem.If

purchased together this is done

by default at the factory.

16.

USB CHARGE OUTPUTS

(PHONE/PODS): use the first

two USB ports to charge a

mobile phone or additional

pods.

17.

USB CHARGE OUTPUTS

(PODS/REMOTE): use thesetwo

USB ports to charge additional

pods or optional remote control.

18.

AUX POWERINPUT:5VUSB

power from a laptop or USB

power pack can be used in a

portable application to power

the Activate Station wireless

audio functions (in place of the

standard24Vpowersupply).

Note charging is disabled when

auxiliary power is used.

19.

DC POWER INPUT: plug the

primary24V/1.75A power supply

into this jack.

Safety

Specifications

Maintenance

oubleshooting

Additional

Information

DaiIy

Operation

Initial

Set-up

Overview

SECTION2:

INITIAL SET-UP

DETERMINE SET-UP LOCATION

ActivateStation:

The Activate Station charges and organizes and charges the pods and

microphone(s) and also wirelessly connects audio to the classroom audio system

and your mobile device. Set it up in a convenient place near a power source that

is highly accessible for both teachers and students. If plugging in multimedia

audio sources, it should be located in close proximity to minimize cable runs.

Keyconsiderations:

•

Closeproximity toACpoweroutlet

•

Accessible for daily charging of all components

•

Near multimedia audio sources if desired

•

Do not place in a fully enclosed metal cabinet

Pods

The pods are designed to be highly portable and move around the room with

the student group. For optimum audio quality, they should be placed in the

center of a table or group. Pods can be taken out of the room up to about 100

feet before communication is lost.

NEW DIAGRAM REQUIRED

Charging

Station

Speaker Pods

Safety

Specifications

Maintenance

oubleshooting

Additional

Information

DaiIy

Operation

Overview

Initial

Set-up

Table des matières

Autres manuels Lightspeed Système stéréo

Lightspeed

Lightspeed Redcat Access LSRCA 1881 Manuel utilisateur

Lightspeed

Lightspeed Cat 855 Manuel utilisateur

Lightspeed

Lightspeed Activate System Manuel utilisateur

Lightspeed

Lightspeed Lightspeed Manuel utilisateur

Lightspeed

Lightspeed Cascadia C25 Manuel utilisateur

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed RedcatAccess Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed Access Link Manuel utilisateur

Lightspeed

Lightspeed Mobile PA Manuel utilisateur

Lightspeed

Lightspeed 820iR Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed CAT 860 Manuel utilisateur

Lightspeed

Lightspeed CAT AV Manuel utilisateur

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed flexcat Manuel utilisateur

Lightspeed

Lightspeed 800 Series Manuel utilisateur

Lightspeed

Lightspeed CAT 860 Manuel utilisateur

Lightspeed

Lightspeed Redcat media Manuel utilisateur

Lightspeed

Lightspeed TOPCAT Manuel utilisateur

Lightspeed

Lightspeed 955Access Manuel utilisateur

Lightspeed

Lightspeed flexcat Manuel utilisateur

Lightspeed

Lightspeed 820iR Manuel utilisateur

Lightspeed

Lightspeed 975 Manuel utilisateur

Manuels Système stéréo populaires d'autres marques

LG CM3330B Manuel utilisateur

Sony

Sony SS-CEP50 Manuel utilisateur

Cetacea Sound

Cetacea Sound CVS-II Manuel utilisateur

Aiwa

Aiwa XR-H66MD Manuel utilisateur

Denon

Denon UCD-250 Manuel utilisateur

Sanyo

Sanyo DC-MX41i Manuel utilisateur

Sharp

Sharp CD-ES600V Manuel utilisateur

Exibel

Exibel BDX600-UK Manuel utilisateur

Sanyo

Sanyo DC-F320 Manuel utilisateur

Philips

Philips FWM583X Manuel utilisateur

Sharp

Sharp CD-C462 Manuel utilisateur

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuel utilisateur

Aiwa

Aiwa XR-EM70 Manuel utilisateur

Cyrus

Cyrus Lyric Manuel utilisateur

Philips

Philips MCM159/98 Manuel utilisateur

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuel utilisateur

RCA

RCA RS3965SB Manuel utilisateur

Sharp

Sharp XL-UH240 Manuel utilisateur