Lexmark X466DTE Manuel utilisateur

Wireless Setup Guide

Edition notice

November 2008

Thefollowing paragraph does notapply toany countrywhere suchprovisions are inconsistentwith locallaw:THIS PUBLICATIONIS PROVIDED

“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain

transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these

changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation

developed exclusively at private expense.

Contents

Edition notice......................................................................................2

Preparing to connect wirelessly.....................................................5

Follow these steps to set up your printer......................................................................................................................5

Information you will need to set up the printer on a wireless network.............................................................5

Adding the printer to a network that uses MAC address filtering.......................................................................6

Connecting to a wireless network using Windows.....................7

Installing the printer on a wireless network (Windows)..........................................................................................7

Connecting to a wireless network using Macintosh.................10

Installing the printer on a wireless network (Macintosh)......................................................................................10

Troubleshooting wireless setup....................................................14

Networking glossary.......................................................................25

Index...................................................................................................27

Contents

Preparing to connect wirelessly

Follow these steps to set up your printer

CAUTION—POTENTIAL INJURY: See the enclosed Safety Sheet before making any cable or electrical

connection.

Note: Do not connect cables until instructed to do so.

1Set up the printer hardware. For more information, see the Setup Guide.

2Follow the instructions for your operating system:

•Windows—See “Information you will need to set up the printer on a wireless network” on page 5 and

“Installing the printer on a wireless network (Windows)” on page 7.

•Macintosh—See “Information you will need to set up the printer on a wireless network” on page 5 and

“Installing the printer on a wireless network (Macintosh)” on page 10.

Information you will need to set up the printer on a

wireless network

Note: Do not connect the installation or network cables until prompted to do so by the setup software.

•SSID—The SSID is also referred to as the network name.

•Wireless Mode (or Network Mode)—The mode will be either infrastructure or ad hoc.

•Channel (for ad hoc networks)—The channel defaults to auto for infrastructure networks.

Some ad hoc networks will also require the auto setting. Check with your system support person if you are not

sure which channel to select.

Preparing to connect wirelessly

•Security Method—There are three basic options for Security Method:

–WEP key

If your network uses more than one WEP key, enter up to four in the provided spaces. Select the key currently

in use on the network by selecting the Default WEP Transmit Key.

–WPA or WPA2 passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be

set for the same type on the router and on the printer, or the printer will not be able to communicate on the

network.

–No security

If your wireless network does not use any type of security, then you will not have any security information.

Note: Using an unsecured wireless network is not recommended.

If you are installing the printer on an 802.1X network using the Advanced method, then you may need the following:

•Authentication type

•Inner authentication type

•802.1X username and password

•Certificates

Note: For more information on configuring 802.1X security, see the Networking Guide on the Software and

Documentation CD.

Adding the printer to a network that uses MAC

address filtering

Every network device has a unique hardware identification number to distinguish it from other network devices. This

identification number is called the Media Access Control (MAC) address.

A list of MAC addresses can be set on a wireless router so that only those devices with matching MAC addresses can

join the network. This is called MAC address filtering. When installing the printer on a network that uses MAC address

filtering, be sure to add the printer MAC address to the list of addresses allowed by the wireless router. If this address

is not specifically allowed on the wireless network, then the printer will not work wirelessly.

If the printer has a factory-installed internal print server, then the MAC address is a series of letters and numbers

located on the MAC address sheet that came with the printer.

The MAC address appears in the following format:

00:04:12:34:56:78

Note: Print a network setup page if you cannot locate the printer MAC address. It will appear on the network setup

page. For more information on printing a network setup page, see the User's Guide on the Software and

Documentation CD.

Preparing to connect wirelessly

Connecting to a wireless network using

Windows

Installing the printer on a wireless network

(Windows)

Before you install the printer on a wireless network, make sure that:

•A wireless card is installed in your printer.

•Your wireless network is set up and working properly.

•The computer you are using is connected to the same wireless network where you want to set up the printer.

1Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer

on.

Make sure the printer and computer are fully on and ready.

Do not connect the USB cable until instructed to do so on the screen.

2From the printer control panel, select your language and country or region, and then touch Continue.

3Select your time zone, and then touch Continue.

Connecting to a wireless network using Windows

4Deselect any function you plan to set up later, such as Fax or E-mail, and then touch Continue.

5Select any additional buttons you want to display on the home screen, and then touch Continue.

6If Fax is enabled, then type in your Fax Station name and touch Enter. For more information on fax station name

and number, see your system support person; or touch Back to go back and deselect Fax.

7If Fax is enabled, enter the Fax station (phone) number for this printer, and then touch Continue.

8If E-mail is enabled, type in the Primary SMTP (mail server) Gateway address, and then touch Enter. For more

information on enabling e-mail, see your system support person; or touch Back to go back and deselect

E-mail.

9If prompted, set the date and time, and then touch Continue.

10 Insert the Software and Documentation CD.

11 Click Install Printer and Software.

12 Click Agree to agree to the License Agreement.

13 Select Suggested, and then click Next.

14 Click Wireless Network Attach.

Connecting to a wireless network using Windows

15 Remove the label covering the USB port on the back of the printer.

16 Connect the cables in the following order:

aTemporarily connect a USB cable between the computer on the wireless network and the printer.

Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable

so you can print wirelessly.

bIf you plan to set up fax now, then connect the fax cables. See the User's Guide on the Software and

Documentation CD for help deciding how to connect the cables.

17 Follow the on-screen instructions to complete the software installation.

Note: Basic is the recommended path to choose. Choose Advanced only if you want to customize your

installation or if your network uses 802.1x security.

18 To allow other computers on the wireless network to use the wireless printer, follow steps 10 through 14 for each

computer.

Connecting to a wireless network using Windows

Connecting to a wireless network using

Macintosh

Installing the printer on a wireless network

(Macintosh)

Before you install the printer on a wireless network, make sure that:

•A wireless card is installed in your printer.

•Your wireless network is set up and working properly.

•The computer you are using is connected to the same wireless network where you want to set up the printer.

Prepare to configure the printer

1Locate the printer MAC address on the sheet that came with the printer.Write the last six digits of the MACaddress

in the space provided below:

MAC address: ___ ___ ___ ___ ___ ___

2Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer

on.

3From the printer control panel, select your language and country or region, and then touch Continue.

4Select your time zone, and then touch Continue.

Connecting to a wireless network using Macintosh

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lexmark Imprimante tout-en-un

Lexmark

Lexmark MX810 Series Instructions d'installation et d'entretien

Lexmark

Lexmark GENESIS S815 Manuel utilisateur

Lexmark

Lexmark X543DN Manuel utilisateur

Lexmark

Lexmark T62X Manuel utilisateur

Lexmark

Lexmark CX310 series Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Lexmark

Lexmark 544n - X Color Laser Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Lexmark

Lexmark X782 Manuel de l'opérateur

Lexmark

Lexmark X950 Series Manuel d'utilisation

Lexmark

Lexmark MX410de Manuel utilisateur

Lexmark

Lexmark MB2546 Manuel utilisateur

Lexmark

Lexmark MX6500E Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel utilisateur

Lexmark

Lexmark CX410 series Manuel utilisateur

Lexmark

Lexmark X2650 - Color Printer 3-IN-1 Manuel utilisateur

Lexmark

Lexmark MX532 Manuel utilisateur

Lexmark

Lexmark X792de Manuel utilisateur

Lexmark

Lexmark XM1145 Manuel utilisateur

Lexmark

Lexmark 2200 Series Manuel

Lexmark

Lexmark 4600 Series Manuel utilisateur

Lexmark

Lexmark CX532 Manuel utilisateur

Lexmark

Lexmark X820E Manuel utilisateur

Lexmark

Lexmark X950 Series Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Brother

Brother MFC-9760 Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel

Ricoh

Ricoh Pro C900 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur

Copystar

Copystar CS 4551ci Manuel utilisateur

Konica Minolta

Konica Minolta Magicolor 4650EN Manuel utilisateur

Brother

Brother MFC-9840CDW Manuel utilisateur