LEXIBOOK MeteoClock Elegance Evolution SM1820 Manuel utilisateur
Copyright ©Lexibook 2005 1
Congratulations on your purchase of this weather station, MeteoClock®SM1820 “Elegance Evolution”.
Please take the time to read and understand this manual so you can begin to enjoy the
convenience and features this product has to offer.
What exactly is a Weather Station?
Lexibookdigital stations measure not only the time in progress – thanks to their built-in clock- but also
the actual and upcoming weather.
The MeteoClock®SM1820 incorporates the following functions:
-Thermometer:
The temperature is displayed in real time to the nearest tenth of a degree Celsius. Thanks to its
wireless sensor, the weather station can give you the temperature reading outside or in another room.
-Hygrometer:
Outdoor or indoor hygrometry is expressed in percentage of humidity in the ambient air.The ideal
‘Comfort Zone’ for the human body ranges from 35 to 65% hygrometry for a given temperature
between 18 and 24oC.
-Barometer:
The station also monitors the atmospheric pressure and, based on its pattern of evolution, displays a
weather forecast as a user-friendly icon: sun, clouds, rain... That’s the weather to be expected in the
next 8 to 12 hours.
And many extra features:
-Animated icons -Wall mounting stand
-Pivoting and rotating base - Blue backlit LCD display
INTRODUCTION
MeteoClock®“Elegance Evolution”
SM1820 + ASM30
-Instruction Manual
SM1820GB 11/04/2005 10:19 Page 1
Copyright ©Lexibook 2005
2
MAIN FEATURES
Main Display Unit SM1820
ØPerpetual Calendar up to year 2069.
Ø12/24 hour time display selectable.
ØLocal temperature and humidity display.
ØAnimated weather forecast symbols.
ØCurrent and past 12 hours barometric
pressure reading.
ØReceives and monitors temperature and
humidity from up to 3 remote sensors via RF
technology of 433MHz (One Wireless Thermo
Sensor Included).
ØTemperature and humidity trend indicator.
ØMaximum/Minimum Memory for Indoor /
Outdoor Temperature and Humidity.
ØDays of week selectable in 8 Languages.
ØWall Mount or base selectable.
ØLunar and tidal phases
ØUser selectable °C or °F
ØBattery: 2 x AA size
Thermo sensor unit ASM30
ØDrip-proof design with LCD
ØTemperature display in user- selectable
°C or °F
ØHumidity display
ØWall-mountable
ØTransmission range: up to 30 meters in
open area.
ØBattery type: 2 x AAA size
SM1820GB 11/04/2005 10:19 Page 2
Copyright ©Lexibook 2005 3
GETTING STARTED
A1 – Animated weather forecast symbols
A2 – Pressure trend indicator
A3 – History of barometric pressure readings
A4 – Current barometric pressure
A5 – Indoor Temperature
A6 – Outdoor Max/Min temperature and humidity
memory
A7 – Remote sensor channel # (CH) & outdoor
temperature trend
A8 – Outdoor Temperature
A9 – Indoor Humidity
A10 – Indoor Max/Min temperature & humidity memory
A11 – Channel # & outdoor humidity trend
A12 – Alternate channel display & signal search
A13 – Alarm 1 & 2
A14 – Outdoor Humidity
A15 – Day of the week
A16 – Time Display
A17 – Month and Date
A18 – Blue backlit
A19 – Tide and moon phase indicators
A. Main unit LCD Display
SM1820GB 11/04/2005 10:19 Page 3
Copyright ©Lexibook 2005
4
B1 – Alarm on/off: to turn Alarm 1 or 2 on/off
B2 – Channel: to toggle between channel 1, 2 and 3.
B3 – In (Min/Max): to enter the max/min indoor
temperature/humidity records.
B4 – Mode/Set: to enter and set the alarm clock,
B5 – Out (Min/Max): to enter the max/min outdoor
temperature/humidity records.
*Located on top of the main unit
B. Main unit function keys *
B6 – History: to set the height from sea level, to
view a past barometric pressure readings.
B7 – ▲▲button: to adjust your altitude from level, to
select the pressure measurement unit. Press
and hold to adjust digits at a faster rate.
B8 – ▼▼button/ In °C/°F: to adjust your altitude
from sea level, to select oC or oF in indoor
temperature display. Press and hold to adjust
digits at a faster rate.
B9 – Alert: to set the temperature alert, then turn the
alert on/off.
B10 – +(12/24) button: to adjust the alarm clock and
the alert, to select the 12/24 display mode.
Press and hold to adjust digits at a faster rate.
B11 – - (Out °C/°F) : to adjust the alarm clock and the
alert.
Press and hold to adjust digits at a faster rate.
** Located at the back of the main unit
B bis . Main unit back keys **
SM1820GB 11/04/2005 10:19 Page 4
Copyright ©Lexibook 2005 5
C1 – Channel number
C2 – Low battery indicator
C3 – Outdoor temperature
C4 – Outdoor humidity
C5 – Automatic learn function icon
C- Sensor unit – LCD Display
D1 – °C/°F button: to select °C or °F display.
D2 – Channel selection switch: to set the
sensor unit to channel 1, 2 or 3.
D3 – TX button: to synchronize the remote sensor
with new °C/°F or channel settings.
*** Located at the back of the sensor unit, inside
the battery compartment.
D. Sensor Unit Function keys ***
SM1820GB 11/04/2005 10:19 Page 5
Copyright ©Lexibook 2005
6
Your Meteoclock works with 2 AA batteries for the main unit and 2 AAA for the remote sensor (all not
included).
Battery installation
1. Main Unit: Use your finger to lift the battery door located
at the back of the main unit. Insert 2 AA batteries
according to the polarity. Close back the battery
compartment.
2. Remote Sensor: Use a screwdriver to open the battery
door located at the back of the remote sensor unit. Insert
2 AAA batteries according to the polarity. Close back the
battery compartment and tighten the screw.
LOW BATTERY INDICATION: If the batteries of the remote
sensor are low, the following indicator will be displayed on
the main unit above the outdoor humidity display [A14].
Please replace the remote sensor’s batteries. The indicator will
also be displayed on the top of the remote sensor’s screen. When the main unit’s LCD display
becomes dim, it indicates that the batteries are low and need to be changed.
Please make sure the main unit has NOT been turned on.
SETTING THE REMOTE SENSOR
1. Unscrew the battery cover located at the back of the sensor unit and insert 2xAAA batteries to begin
the settings.
SETTINGS
POWER SUPPLY
Remote Sensor
Main Unit
SM1820GB 11/04/2005 10:19 Page 6
Copyright ©Lexibook 2005 7
2. CH 123 will be displayed. Select a channel (1, 2 or 3) using the [D2] switch. The channel function
allows the receiver to identify each remote sensor. The main unit can receive up to 3 different
remote channels. The preferred channel number (1, 2 or 3) for each individual remote sensor can be
assigned. However, channel 1 is used for collecting data from outdoors and activating the weather
forecast symbols. If you only have one remote sensor, please set it at channel 1 and place it ou
doors.
3. Select whether the sensor will display the temperature in Celsius or Fahrenheit degrees by pressing
[D1].
4. Press the TX button [D3] to synchronize the sensor with your new settings. The icon will appear
at [C5].
5. Insert 2 x AA batteries at the back of the main unit.
Note: the SM1820 comes with one main unit and one remote sensor. If you wish to buy additional
sensors please refer to the section ACCESSORIES at the end of this manual. SM1822 comes with
2 sensors, SM1823 comes with 3 sensor.
SYNCHRONIZATION
1. The Learn function executes automatically and runs for approximately 2 minutes when the batteries
are first installed in the receiver.
2. Within these 2 minutes, the main unit picks up the temperature & humidity signals from the remote
sensor and displays the readings. If you only have one remote sensor, the main unit will be
automatically synchronized with the channel set on the remote sensor.
SM1820GB 11/04/2005 10:19 Page 7
Copyright ©Lexibook 2005
8
Notes:
FIXING THE REMOTE SENSOR AND MAIN UNIT
Remote sensor
The remote sensor can be placed upright on a smooth surface or
wall-mounted. To ensure a good transmission, the remote sensor
should not be installed on or near a large metal surface. Before
choosing the location of the remote sensor, test that the receiver can
receive the signals. It is also recommended that the remote sensor is
placed as close as possible to the main unit to eliminate any interference. The remote sensor can also
be wall-mounted. To do so, locate the wall-mounting hole at the back of the sensor (upper part) and fix
it on a hook or nail.
Main unit
The main unit can be fixed on the rotating/pivoting base or on the wall-mounted
base (both included). To use the base, fix the main unit’s socket (located under
the unit) into the base’s jack. Place the base on a smooth, stable surface. To use
the wall-mounted base, insert a screw in each wall-mounting hole (2) and fix it
to a wall. Then, fix the main unit’s socket into the wall-mounted base’s jack.
SM1820GB 11/04/2005 10:19 Page 8
Copyright ©Lexibook 2005 9
BACK LIGHT:
To use the back light, press [A18], located below the main unit LCD display. The back light stays on for
5 seconds.
Time and Date Setting:
1. The setting sequence is displayed in the order:
Hours ➞➞Minutes ➞➞Seconds ➞➞Year ➞➞Month/Day sequence ➞➞Month ➞➞Day ➞➞Time Zone
➞➞Day-of-week language.
2. Press and hold [B4] to enter the manual Clock/Calendar setting mode.
3. Time and date: Press the “+” [B10] or “-” [B11] buttons to adjust the settings and press [B4] to
confirm each setting.
4. The month and day sequence gives you the option to select whether the month or the day is
displayed first.
5. Time Zone.
6. Day of the week : It can be displayed in different 8 languages: for English, select EN; German (GE),
French (FR), Spanish (SP), Italian (IT), Dutch (NE), Danish (DA), and Russian (RU).
Note: you will automatically exit the time setting mode after 5 seconds of inactivity.
12/24 Hour Display mode:
Outside the manual time setting mode, press the [B10] key to select the 12 or 24 hours mode.
CLOCK AND ALARM SETTINGS
SM1820GB 11/04/2005 10:19 Page 9
Copyright ©Lexibook 2005
10
Alarm Clock Function:
1. The alarm sequence is as follows:
Time ➞ Alarm 1 ➞ Alarm 2 ➞ Time
2. Outside the manual time setting mode, press [B4] to scroll to Alarm 1 (Alarm 2 ).
3. Press and hold [B4] to set the desired alarm.
4. Use the [B10] and [B11] buttons to adjust the hour then press [B4].
5. Use the [B10] and [B11] buttons to adjust the minutes then press [B4].
6. Use the [B10] and [B11] buttons to turn the alarm ON and OFF and then press [B4] to confirm your
alarm settings. When an alarm is activated, its icon ( and/or ) will be displayed below the time.
7. When one of the alarm rings, or flashes.
Press the backlit button [A18] to activate the snooze alarm. The alarm will ring again 5 minutes later.
In the meantime, the alarm icon will continue to flash. Press any button to stop the alarm. The alarm
will ring again the next day at the same time. If you wish to deactivate the alarm completely, you must
turn it off (see step 6).
Setting the height from sea level
Once the synchronization process is complete and the time and date are set, you must enter the height
(in metres) of the weather station from sea level:
1. Press and hold [B6]; the height in metres flashes [A4].
2. Press [B7] to increase the value and [B8] to decrease the height to the nearest ten. If you want to
move the digits at a faster rate, keep [B7] / [B8] pressed down. The range is 200m below sea level
to 2,500m above sea level.
3. Press [B6] to confirm your settings. Once the height from sea level is set, the pressure reading [A4]
shows the barometric pressure at the sea level.
Notes: The weather forecast may not be accurate if the height entered is incorrect. The height
should be re-entered if the location of the weather station changes.
WEATHER FORECAST AND DISPLAY
SM1820GB 11/04/2005 10:19 Page 10
Table des matières
Autres manuels LEXIBOOK Station météorologique
LEXIBOOK
LEXIBOOK MeteoClock SM1120 Manuel utilisateur
LEXIBOOK
LEXIBOOK MeteoClock SM2000 Manuel utilisateur
LEXIBOOK
LEXIBOOK MeteoClock Wall Deco SM1760 Manuel utilisateur
LEXIBOOK
LEXIBOOK SMP300 Manuel utilisateur
LEXIBOOK
LEXIBOOK SM980 Manuel utilisateur
LEXIBOOK
LEXIBOOK WB400RX Manuel utilisateur
LEXIBOOK
LEXIBOOK Meteoclock SM880 Manuel utilisateur
LEXIBOOK
LEXIBOOK SM1102 Manuel utilisateur
LEXIBOOK
LEXIBOOK MeteoClock SM1400 Manuel utilisateur
LEXIBOOK
LEXIBOOK MeteoClock Evolution Compact SM180 Manuel utilisateur
LEXIBOOK
LEXIBOOK MeteoClock SM883 Manuel utilisateur
LEXIBOOK
LEXIBOOK METEOCLOCK FRUITY Manuel utilisateur
LEXIBOOK
LEXIBOOK MeteoClock SM1600 Manuel utilisateur
LEXIBOOK
LEXIBOOK WB400 Manuel utilisateur
LEXIBOOK
LEXIBOOK METEOCLOCK SUNTIME Manuel utilisateur
LEXIBOOK
LEXIBOOK Meteo Clock Elegance First SM1840 Manuel utilisateur
LEXIBOOK
LEXIBOOK MeteoClock SM882 Manuel utilisateur
LEXIBOOK
LEXIBOOK Meteoclock SM880 Manuel utilisateur
LEXIBOOK
LEXIBOOK MeteoClock SM1770 Manuel utilisateur
LEXIBOOK
LEXIBOOK SM1960 Manuel utilisateur
Manuels Station météorologique populaires d'autres marques
National Geographic
National Geographic VA Colour RC Manuel utilisateur
Renkforce
Renkforce 1208067 Manuel utilisateur
Levenhuk
Levenhuk Discovery Report WA40 Manuel utilisateur
Instant Transmission
Instant Transmission MA 10410 Manuel utilisateur
Lutron Electronics
Lutron Electronics PHB-318 Manuel utilisateur
WAREMA
WAREMA EWFS Weather station eco Manuel utilisateur